MRC Smashed it again :)

4.2 V8 32v Naturally Aspirated - 414 bhp
Post Reply
Shaners4
Neutral
Posts: 25
Joined: Mon Jan 20, 2014 8:18 am

MRC Smashed it again :)

Post by Shaners4 » Sun Jun 01, 2014 9:14 am

Well as most of you all know my B7 saloon was running a shocking 332bhp on a dyno dynamics a month back! Done a lot of research and decided to throw some money at her and take her to MRC to get sorted. What a difference :bigblink:

It was currently running at 350PS and 436Nm on their dyno machine.

It pulls like a bloody train now I cant believe the difference!
It had a Carbon Clean
Remap
Deflap inlet manifold
Remove precats
Undoubtably it did cost me a lot of money but in my eyes was worth it. Top fellas well done :audibash:

Currently now at 430PS and 474Nm

Image[/url]
Top
jaysrs4
5th Gear
Posts: 1116
Joined: Sat Jan 28, 2012 11:23 pm

Re: MRC Smashed it again :)

Post by jaysrs4 » Sun Jun 01, 2014 10:03 am

Jesus they coin it in. Circa 2k? I seriously want this doing at some point. But a house purchase is looming :-s

Nice work :thumbs:
Image
Top
Shaners4
Neutral
Posts: 25
Joined: Mon Jan 20, 2014 8:18 am

Re: MRC Smashed it again :)

Post by Shaners4 » Sun Jun 01, 2014 10:05 am

Yeah a little over that figure! Worth every penny though!
They are over 2 hours from me, dropped it there on the tuesday morning and it was ready by thursday morning :jump_clap:
Top
User avatar
neilparf
Cruising
Posts: 2908
Joined: Tue Oct 22, 2013 1:21 am
Location: Kent

Re: MRC Smashed it again :)

Post by neilparf » Sun Jun 01, 2014 10:55 am

Nice one Shane - great difference. Great figures. Very much the same with mine. A train is about right!

They have years of experience and total steadfast results - they charge appropriately for a guaranteed result. I'm not sure they coin it in, but so much as the right money for the right result... :thumb:
Gone but never forgotten:
2007 RS4 B7 Saloon, Metallic Silver with SS+.
LED's all round and Dectane LED tailights. KDS detail and paint. Lepsons black chrome, heavy on the silver wheels. JCWeldFab full system - valved and no pre-cats. MRC stage 2, de-flap and full carbon clean - 438PS and 489NM. HEL brake lines. H&R Spacers. Gtechniq C1 and EXO V2 coatings. 2010+ RNS-E. On the MRC dyno: http://youtu.be/y_k0VJ2--y8
Top
User avatar
toyneg
5th Gear
Posts: 1351
Joined: Mon Aug 20, 2012 2:26 pm
Location: Hampshire

Re: MRC Smashed it again :)

Post by toyneg » Sun Jun 01, 2014 11:37 am

I know exactly the difference you describe, they got mine from 343 to 431 last year. Awesome isn't it! :-)
Glacier White 2017 S3 Saloon with all the Tech.
Gone but not forgotten - B7 RS4 Saloon Black - H&R spacers, Tints, Gun Metal Alloys, MRC Stage 2, Pre Cats, Milltek Non Res, K/W Springs, MRC Full Carbon clean - 431ps
previous - B6 A4 1.8T S-Line 215PS
Top
jaysrs4
5th Gear
Posts: 1116
Joined: Sat Jan 28, 2012 11:23 pm

Re: MRC Smashed it again :)

Post by jaysrs4 » Sun Jun 01, 2014 12:54 pm

Do they give much advice on maintaining the power or advise how long you can expect it to last before it needs cleaning again?

Apart from regular 'Italian Tuning' - and proper use, do they give any other recommendations?
Image
Top
Regy53
2nd Gear
Posts: 225
Joined: Mon May 26, 2014 1:47 pm

Re: MRC Smashed it again :)

Post by Regy53 » Sun Jun 01, 2014 1:16 pm

wow nice torque just looking at my roller graph and I have around 100nm less than you despite having a decoke and a stage one.

Does pre cat removal and a stage two open up 100nm torques? I may invest if thats the case
TTS Charged RS4 plus all the goodies
Top
User avatar
neilparf
Cruising
Posts: 2908
Joined: Tue Oct 22, 2013 1:21 am
Location: Kent

Re: MRC Smashed it again :)

Post by neilparf » Sun Jun 01, 2014 4:41 pm

Regy53 wrote:wow nice torque just looking at my roller graph and I have around 100nm less than you despite having a decoke and a stage one.

Does pre cat removal and a stage two open up 100nm torques? I may invest if thats the case
Regy53 - I would say absolutely or very near that. The pre cats rob the 4 of any decent power. Stage 2 with the pre cats gone would give you easily or close to 100nm...

I was at 370nm with precats gone. Then Decoke, deflap and stage 2 took me to 483nm...
Gone but never forgotten:
2007 RS4 B7 Saloon, Metallic Silver with SS+.
LED's all round and Dectane LED tailights. KDS detail and paint. Lepsons black chrome, heavy on the silver wheels. JCWeldFab full system - valved and no pre-cats. MRC stage 2, de-flap and full carbon clean - 438PS and 489NM. HEL brake lines. H&R Spacers. Gtechniq C1 and EXO V2 coatings. 2010+ RNS-E. On the MRC dyno: http://youtu.be/y_k0VJ2--y8
Top
RIV
Cruising
Posts: 5122
Joined: Wed Nov 30, 2011 10:27 pm

Re: MRC Smashed it again :)

Post by RIV » Sun Jun 01, 2014 5:03 pm

wow nice torque just looking at my roller graph and I have around 100nm less than you despite having a decoke and a stage one.

Does pre cat removal and a stage two open up 100nm torques? I may invest if thats the case
Don't take this the wrong way But!!! You took yours to AMD.
Nuff said MRC for the win and the power+the map
Top
User avatar
neilparf
Cruising
Posts: 2908
Joined: Tue Oct 22, 2013 1:21 am
Location: Kent

Re: MRC Smashed it again :)

Post by neilparf » Sun Jun 01, 2014 7:02 pm

Silas wrote:
wow nice torque just looking at my roller graph and I have around 100nm less than you despite having a decoke and a stage one.

Does pre cat removal and a stage two open up 100nm torques? I may invest if thats the case
Don't take this the wrong way But!!! You took yours to AMD.
Nuff said MRC for the win and the power+the map
That Silas speaks the truth - I didn't see the signature spec.

Sorry Reg, take the AMD map off and see how MRC's map goes...
Gone but never forgotten:
2007 RS4 B7 Saloon, Metallic Silver with SS+.
LED's all round and Dectane LED tailights. KDS detail and paint. Lepsons black chrome, heavy on the silver wheels. JCWeldFab full system - valved and no pre-cats. MRC stage 2, de-flap and full carbon clean - 438PS and 489NM. HEL brake lines. H&R Spacers. Gtechniq C1 and EXO V2 coatings. 2010+ RNS-E. On the MRC dyno: http://youtu.be/y_k0VJ2--y8
Top
User avatar
toyneg
5th Gear
Posts: 1351
Joined: Mon Aug 20, 2012 2:26 pm
Location: Hampshire

Re: MRC Smashed it again :)

Post by toyneg » Sun Jun 01, 2014 9:44 pm

I have had an AMD Stage 2 and MRC Stage 2 map on mine and the difference is night and day
Glacier White 2017 S3 Saloon with all the Tech.
Gone but not forgotten - B7 RS4 Saloon Black - H&R spacers, Tints, Gun Metal Alloys, MRC Stage 2, Pre Cats, Milltek Non Res, K/W Springs, MRC Full Carbon clean - 431ps
previous - B6 A4 1.8T S-Line 215PS
Top
User avatar
Brooner
Cruising
Posts: 3989
Joined: Mon Jan 20, 2003 5:12 am
Location: Scotlandshire

Re: MRC Smashed it again :)

Post by Brooner » Sun Jun 01, 2014 10:10 pm

They are the boys did mine a few years back head work carbon clean and filter stage 2 remap
made the car feel alive
Attachments
Dyno.JPG
2018 B9 RS4 Navarra Blue
2013 B8 RS4 Sepang Blue
2007 B7 RS4 Avant Sprint Blue
2001 B5 RS4 Nogaro Blue
1998 B5 S4 Avant Kingfisher Blue
1993 B4 S2 Avant laser Red
Top
Regy53
2nd Gear
Posts: 225
Joined: Mon May 26, 2014 1:47 pm

Re: MRC Smashed it again :)

Post by Regy53 » Sun Jun 01, 2014 10:26 pm

cheers fella's

I diddnt do the AMD remap i purchased the car from this forum only last week.

I think I will book this in with MRC.

Out of question as I have a non Res exhaust, is the exhaust louder after precat removal?
TTS Charged RS4 plus all the goodies
Top
User avatar
neilparf
Cruising
Posts: 2908
Joined: Tue Oct 22, 2013 1:21 am
Location: Kent

Re: MRC Smashed it again :)

Post by neilparf » Sun Jun 01, 2014 10:36 pm

Regy53 wrote:cheers fella's

I diddnt do the AMD remap i purchased the car from this forum only last week.

I think I will book this in with MRC.

Out of question as I have a non Res exhaust, is the exhaust louder after precat removal?
I would say not - the two rear back boxes manage the sound...
Gone but never forgotten:
2007 RS4 B7 Saloon, Metallic Silver with SS+.
LED's all round and Dectane LED tailights. KDS detail and paint. Lepsons black chrome, heavy on the silver wheels. JCWeldFab full system - valved and no pre-cats. MRC stage 2, de-flap and full carbon clean - 438PS and 489NM. HEL brake lines. H&R Spacers. Gtechniq C1 and EXO V2 coatings. 2010+ RNS-E. On the MRC dyno: http://youtu.be/y_k0VJ2--y8
Top
coffey555
5th Gear
Posts: 1147
Joined: Wed Aug 17, 2011 2:41 pm

Re: MRC Smashed it again :)

Post by coffey555 » Mon Jun 02, 2014 4:56 am

Ever so slightly and with a bit more rasp.
Misano Red RS4 B7 Avant
Top
Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: QuRace and 145 guests