2003 RS6 engine issues...

4.2 V8 40v biturbo - 450 bhp
4.2 V8 40v biturbo - 480 bhp (plus)
User avatar
Marcin
1st Gear
Posts: 60
Joined: Wed Apr 10, 2024 7:44 pm
Location: Ireland

Re: 2003 RS6 engine issues...

Post by Marcin » Wed Apr 24, 2024 11:43 am

Shoppinit wrote:
Wed Apr 24, 2024 11:41 am
Only if you ever need to slow down quickly.
I didn't know that, what would you recommend?
Is:
2003 RS6 | 2013 A6 BiTDI quattro | 2016 Corsa ;) | Suzuki GSX-R 1000 K6
was:
2004 A6 3.0TDI quattro | 2000 A6 1.8T quattro | 1997 A6 1.8 | 1998 Opel Vectra 1.6 | 1985 VW Santana |

User avatar
Shoppinit
Cruising
Posts: 20280
Joined: Wed Dec 31, 2008 6:24 pm

Re: 2003 RS6 engine issues...

Post by Shoppinit » Wed Apr 24, 2024 12:36 pm

Yeah, I'm pretty sure all those cheap ones (Brembo, Mintex, Ferodo) come out of the same Federal Mogul factory made from various floor sweepings. I set fire to mine when I was trying to bed them in. They're probably enough to stop you once from high speed, but totally unsuitable for spirited driving.

I personally would get some OE pads. You might struggle to get the RS6 part number but the RS4 B7 pads are the same, IIRC. Failing that, some of the more competition oriented models like DS2500 or Pagid RS. I liked the DS2500 on the M3 but I never tried them on the RS6.

It's a bit moot for me now anyway because I've got the C6 calipers and the OE Brembo pads for those are very good (and reasonably priced).

Doesn't matter for the rears. I put the cheapo ones in there.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."

User avatar
Marcin
1st Gear
Posts: 60
Joined: Wed Apr 10, 2024 7:44 pm
Location: Ireland

Re: 2003 RS6 engine issues...

Post by Marcin » Wed Apr 24, 2024 2:42 pm

Shoppinit wrote:
Wed Apr 24, 2024 12:36 pm
Yeah, I'm pretty sure all those cheap ones (Brembo, Mintex, Ferodo) come out of the same Federal Mogul factory made from various floor sweepings. I set fire to mine when I was trying to bed them in. They're probably enough to stop you once from high speed, but totally unsuitable for spirited driving.

I personally would get some OE pads. You might struggle to get the RS6 part number but the RS4 B7 pads are the same, IIRC. Failing that, some of the more competition oriented models like DS2500 or Pagid RS. I liked the DS2500 on the M3 but I never tried them on the RS6.

It's a bit moot for me now anyway because I've got the C6 calipers and the OE Brembo pads for those are very good (and reasonably priced).

Doesn't matter for the rears. I put the cheapo ones in there.
Thanks for the advice Shoppinit! I will look into this
Is:
2003 RS6 | 2013 A6 BiTDI quattro | 2016 Corsa ;) | Suzuki GSX-R 1000 K6
was:
2004 A6 3.0TDI quattro | 2000 A6 1.8T quattro | 1997 A6 1.8 | 1998 Opel Vectra 1.6 | 1985 VW Santana |

BarringtonStanley
Neutral
Posts: 4
Joined: Thu Apr 18, 2024 4:27 pm

Re: 2003 RS6 engine issues...

Post by BarringtonStanley » Wed Apr 24, 2024 7:30 pm

This is my first time posting on the forum so hi there.

I have all these problems and I have changed the plugs, coil packs, n75, suction jet pump, mafs and vac lines but still got no power.

I did have a manifold leak I can hear it but definitely got w0rse so that's obviously got to be sorted but can't figure the no,power out. Tried unplugging bat but to no avail.

Note about brakes, I got EBC discs and blue stuff pads, seem pretty good just wish I had some more speed to be able to use the buggers.

Any help or advise welcome.

B

User avatar
Shoppinit
Cruising
Posts: 20280
Joined: Wed Dec 31, 2008 6:24 pm

Re: 2003 RS6 engine issues...

Post by Shoppinit » Wed Apr 24, 2024 7:39 pm

Welcome.

Post your own thread detailing your issues and we'll respond there.

Also, FON.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."

BarringtonStanley
Neutral
Posts: 4
Joined: Thu Apr 18, 2024 4:27 pm

Re: 2003 RS6 engine issues...

Post by BarringtonStanley » Wed Apr 24, 2024 7:41 pm

Will do.

What is FON?

Felix2566
2nd Gear
Posts: 212
Joined: Sun Apr 09, 2023 2:27 pm

Re: 2003 RS6 engine issues...

Post by Felix2566 » Wed Apr 24, 2024 11:19 pm

Haha, follow the link

BarringtonStanley
Neutral
Posts: 4
Joined: Thu Apr 18, 2024 4:27 pm

Re: 2003 RS6 engine issues...

Post by BarringtonStanley » Thu Apr 25, 2024 8:25 am

Brilliant stuff good work adults. Ha

Post Reply

Return to “RS6 / RS6 plus (C5 Typ 4B) 2002-2004”

Who is online

Users browsing this forum: Google Adsense [Bot], Majestic-12 [Bot] and 148 guests