Dirt in Exhaust Sockets

[Iain]

Morning All - quick one - unplugged the sockets so the valves stay open

Car threw up emissions warning fault on the dash - was in for its service yesterday and the only fault found on the diagnostics was exhaust baffles - light is still on dash

Plugs are a bit sh1tty - Audi said they need replacing (they would)

Milltek going on next week - any recommendations as to what to use to clean plugs? Audi cam below

http://vv2u.co/mljZY

[Surrey Sam]

I'd be trying some Brake cleaner and a small pick first. If the terminals are really badly corroded, the connector would require disassembly and new pins fitted onto the wires and then re-installed into the connector. The dealer is probably charging you 1 hour labour, for the technician to do it.

[RS6chris!]

Thought you had to bag these or plug them?

[MikeFish]

I plugged them with the Milltek valve delete units that stop them fillings with crap and cancel the errors.

[MartayMcFly]

I thought you were meaning like this... (after driving on loosely resurfaced roads for about 5 miles)

[RS6chris!]

Aye

Mine all always full of grit and stones.

[pez81]

Hey man I did the same just buy the milltek valve sensor things for like £45 problem solved

[pez81]

Look at this on eBay http://www.ebay.co.uk/itm/371714465819