Passengers side electric switch trim removal???

[amanda1]

Before I break anything........does this just pop out or is there more too it???

[imacool]

Before I break anything........does this just pop out or is there more too it???

What switch? I'll look in Work Shop manual, just tell me what switch do you want to remove (seat, window?).

[gingertoss]

If its the window switch then there is a hole on the underside of the arm rest under the switch. Use the biggest allen key you can get in the hole and push the switch out gently.

[imacool]

It took me ages to move the images and convert them to be viewable here, hope you appreciate the effort...


Vehicles with hole on underside
– Insert screwdriver -3- in hole.
– Use screwdriver -3- to press retaining tab -2- in direction of arrow -A-.
– Take out window regulator switch unit -1- in direction of arrow -B-.

A70-0624.jpg (17.41 KiB) Viewed 1137 times

Vehicles with no hole on underside
– Mask door trim with adhesive tape -4-.
– Use screwdriver -3- to press retaining tab -2- in direction of arrow -A-.
– Take out window regulator switch unit -1- in direction of arrow.

A70-0178.jpg (18.06 KiB) Viewed 1137 times

All vehicles:
Press retaining tab -2- and pull off connector -1-.

A70-0179.jpg (24.74 KiB) Viewed 1137 times

[amanda1]

Yes sorry Tis the window switch.....it has been picked at by the bratzs but no one will admit to it aghhhhhh

[imacool]

Check the underneath, there may be a hole, if not then the second picture applies.
Mind the work Shop manual is written for left hand drive vehicles...

[amanda1]

Thank you so much for the piccies I have the hole so as soon as I feed the bratzs I will let you know how I get on!!!

[R8GXR]

<beep>, thought mine were bad! keep an eye out for the vapour blasting pictures later.

[imacool]

<beep>, thought mine were bad! keep an eye out for the vapour blasting pictures later.

I can't wait...

[amanda1]

Well that was painless enough .....except the old trim bit is now broken due to getting the window switch out but the new trim bit was only £7.54 so happy days!!!

[Shoppinit]

Rub the remaining rubber off the door handle and it will look great with the new switch. This is what I did. It looks factory.

[rosssavage]

I did my mirror switch cover the other day and it looks so much better now.

Also did what Shop said and rubbed off the rubbish rubber finish on the door handles, good advice