Forge DV

Discuss common aspects of Audi RS and S tuning and modifications
Post Reply
User avatar
PhilT
RS246.com
Posts: 8713
Joined: Fri Jan 10, 2003 2:03 pm
Location: South Yorkshire

Forge DV

Post by PhilT » Thu Feb 27, 2003 12:06 pm

As some of you may know, my day at Donnington yesterday was troubled by intermittent/lack of boost. There were a couple of reasons for this, the first being a split vacuum pipe (the braided one) and the second the Forge diverters.

It appears that I was running the earlier version of the diverters. The only way to tell is to take the diverter apart and check for a seal around the top of the thread (I wish I had taken pictures!!). The new valves have three seals, two for the piston, and one for the case itself; the 'old' ones have two seals for the piston, and no seal for the case.

The second problem was the spring inside the diverter. There are three types of spring - green, yellow, and red - Green is the weakest and red the strongest. I was running green springs.

The end result was that I drove straight to Revo and they swapped my 'old' DVs for the new ones which I fitted in combination with the red springs. I now have a set of each of the springs as the choice of spring is down to the driver, and I can change them if I am not happy.

The car is performing much better now.

Forge UK can be found at http://www.forgemotorsport.co.uk/ and contacted on +44 1452 380999.

Forge US can be found at http://www.forgemotorsport.com/ and contact details are at http://www.forgemotorsport.com/contact.asp.
RS246 Shop - RS246 Window Stickers and RS6 Keyrings

Current : 2016 Audi SQ7 & Radical SR3 Supersport

Ex : 2010 Nissan GT-R Premium Edition, 2014 Audi S3 Sportback, 2007 Audi Q7 4.2 TDI, Clio 172 Cup, B5 RS4, C5 RS6+ (249/999), S2 Coupe, Ex-Police Senator 3.0 24v, Ford Escort 1.3

User avatar
Bushy
Cruising
Posts: 2662
Joined: Thu Jan 02, 2003 2:18 pm
Location: Berkshire

Re: Forge DV

Post by Bushy » Thu Feb 27, 2003 1:57 pm

AmD suggested that i do not fit the red springs as the boost being held for too long could split a hose

Which BTW is what happened yesterday to me anyway

And thanks to Wayside Audi who repaired it on the way home [img]images/graemlins/thumbs.gif[/img]
Can't beat a bit of boost!

User avatar
PhilT
RS246.com
Posts: 8713
Joined: Fri Jan 10, 2003 2:03 pm
Location: South Yorkshire

Re: Forge DV

Post by PhilT » Thu Feb 27, 2003 1:59 pm

I thought you said you were running the yellow springs [img]images/graemlins/tongue.gif[/img] .

Was it the braided hose? What about the error code?
RS246 Shop - RS246 Window Stickers and RS6 Keyrings

Current : 2016 Audi SQ7 & Radical SR3 Supersport

Ex : 2010 Nissan GT-R Premium Edition, 2014 Audi S3 Sportback, 2007 Audi Q7 4.2 TDI, Clio 172 Cup, B5 RS4, C5 RS6+ (249/999), S2 Coupe, Ex-Police Senator 3.0 24v, Ford Escort 1.3

Dean
1st Gear
Posts: 61
Joined: Wed Jan 08, 2003 3:31 pm
Location: Berks/Hants
Contact:

Re: Forge DV *DELETED*

Post by Dean » Thu Feb 27, 2003 4:04 pm

Post deleted by PhilT

User avatar
Bushy
Cruising
Posts: 2662
Joined: Thu Jan 02, 2003 2:18 pm
Location: Berkshire

Re: Forge DV

Post by Bushy » Thu Feb 27, 2003 4:19 pm

wot post?

not it was one of the larger pieces of pipe from the turbos
Can't beat a bit of boost!

Dean
1st Gear
Posts: 61
Joined: Wed Jan 08, 2003 3:31 pm
Location: Berks/Hants
Contact:

Re: Forge DV

Post by Dean » Thu Feb 27, 2003 6:36 pm

It was me harping on about RS6 Dv in my S3 again, cant be arsed to retype it

I must have not pressed the post button or something

just said that there isn't much point in aftermarket DV's in my opinion

My RS6 Dv was 12 quid...
and looks like the original [img]images/graemlins/smile.gif[/img]

[img]images/graemlins/smile.gif[/img]

User avatar
Paul-RS3
4th Gear
Posts: 664
Joined: Thu Jan 09, 2003 1:31 am
Location: UK

Re: Forge DV

Post by Paul-RS3 » Thu Feb 27, 2003 7:11 pm

Dean you posted it in the Stratmosphere Post...

HERE

User avatar
PhilT
RS246.com
Posts: 8713
Joined: Fri Jan 10, 2003 2:03 pm
Location: South Yorkshire

Re: Forge DV

Post by PhilT » Thu Feb 27, 2003 10:29 pm

So now I am I hear there are four types of spring. Weakest to strongest, here they are:

Green
Yellow
Blue
Red

I'm led to believe that the red ones will cope with up to around 2 bar.
RS246 Shop - RS246 Window Stickers and RS6 Keyrings

Current : 2016 Audi SQ7 & Radical SR3 Supersport

Ex : 2010 Nissan GT-R Premium Edition, 2014 Audi S3 Sportback, 2007 Audi Q7 4.2 TDI, Clio 172 Cup, B5 RS4, C5 RS6+ (249/999), S2 Coupe, Ex-Police Senator 3.0 24v, Ford Escort 1.3

LittleSkull
2nd Gear
Posts: 126
Joined: Wed Jan 22, 2003 12:24 am
Location: Rome, Italy
Contact:

Re: Forge DV

Post by LittleSkull » Fri Feb 28, 2003 4:08 pm

Forge just sent me this for those who want to check out the state of their DV

http://www.forgemotorsport.co.uk/valve_service.pdf

Post Reply

Return to “Audi Tuning and Modifications”

Who is online

Users browsing this forum: No registered users and 50 guests