where to get vag-com from??????????????

Diagnostic Trouble Codes (DTC) / VCDS (VAG-COM) forum
User avatar
shaunrs6
Neutral
Posts: 32
Joined: Sun Feb 08, 2009 2:09 pm
Location: east sussex

where to get vag-com from??????????????

Post by shaunrs6 » Sun Feb 08, 2009 3:32 pm

HI,im looking to get vag-com i think it will be very useful to me.

is it just the case of getting a lead and downloading the software from somewhere???

or do you have to buy a disc etc??

whats the best/cheapest option to have this on my laptop??

thanks shaun

User avatar
grizz
Cruising
Posts: 4074
Joined: Sun May 30, 2004 9:40 pm
Location: Unit 20 0151 33 66 888

RE: where to get vag-com from??????????????

Post by grizz » Sun Feb 08, 2009 4:15 pm

Hi Shaun , I got mine from http://www.ross-tech.com/ .You pay for the cable and then down load the software .
It'll do auto updates for you as well ...

Grizz
Unit 20
0151 3366888
The northwest's only dedicated 'RS' repair centre.
Image
http://www.facebook.com/pages/unit-20/104343529619713

User avatar
shaunrs6
Neutral
Posts: 32
Joined: Sun Feb 08, 2009 2:09 pm
Location: east sussex

RE: where to get vag-com from??????????????

Post by shaunrs6 » Sun Feb 08, 2009 4:47 pm

hi grizz,your a great help,thank u.

frazered
3rd Gear
Posts: 492
Joined: Fri Feb 02, 2007 3:14 pm
Location: nw

RE: where to get vag-com from??????????????

Post by frazered » Sun Feb 08, 2009 6:43 pm

check the UK distributor list

quicker than buying from the US

http://www.ross-tech.com/distributors.html

User avatar
PetrolDave
Cruising
Posts: 7599
Joined: Mon Nov 07, 2005 11:28 am
Location: Southampton, Hampshire UK

RE: where to get vag-com from??????????????

Post by PetrolDave » Sun Feb 08, 2009 6:44 pm

Second about getting it direct from Ross Tech.

Think about which lead you buy:
1) do you have a USB port on your laptop? Then get a USB lead, when you replace your laptop it almost certainly won't have a serial (RS232) port.

2) do you plan to get a newer VW/Audi/Seat/Skoda at sometime? Then get a HEX-USB+CAN (or HEX-COM+CAN) lead - that will be compatible with your RS6 and all current models too.

User avatar
shaunrs6
Neutral
Posts: 32
Joined: Sun Feb 08, 2009 2:09 pm
Location: east sussex

RE: where to get vag-com from??????????????

Post by shaunrs6 » Sun Feb 08, 2009 9:05 pm

thanks very much

yorkie
4th Gear
Posts: 699
Joined: Sat Oct 14, 2006 6:33 pm
Location: Cambridge UK

RE: where to get vag-com from??????????????

Post by yorkie » Mon Feb 09, 2009 6:54 pm

Got mine from here, with the current exchange rate probably nearly as cheap as buying from the US.

http://www.gendan.co.uk/category_145.html

frazered
3rd Gear
Posts: 492
Joined: Fri Feb 02, 2007 3:14 pm
Location: nw

RE: where to get vag-com from??????????????

Post by frazered » Mon Feb 09, 2009 7:49 pm

^^ me too

good service

User avatar
shaunrs6
Neutral
Posts: 32
Joined: Sun Feb 08, 2009 2:09 pm
Location: east sussex

Post by shaunrs6 » Mon Feb 09, 2009 10:32 pm

ive just been on rosstech site,and im being thick.

which one do i need to order??what version do people normally get??

and what is the price??

thanks shaun

User avatar
grizz
Cruising
Posts: 4074
Joined: Sun May 30, 2004 9:40 pm
Location: Unit 20 0151 33 66 888

Post by grizz » Mon Feb 09, 2009 10:36 pm

Get the HEX-USB-CAN Lead .
Unit 20
0151 3366888
The northwest's only dedicated 'RS' repair centre.
Image
http://www.facebook.com/pages/unit-20/104343529619713

User avatar
shaunrs6
Neutral
Posts: 32
Joined: Sun Feb 08, 2009 2:09 pm
Location: east sussex

Post by shaunrs6 » Mon Feb 09, 2009 10:43 pm

grizz,is this the $349 version??

User avatar
shaunrs6
Neutral
Posts: 32
Joined: Sun Feb 08, 2009 2:09 pm
Location: east sussex

Post by shaunrs6 » Mon Feb 09, 2009 10:44 pm

grizz,did you get my pm??

User avatar
PetrolDave
Cruising
Posts: 7599
Joined: Mon Nov 07, 2005 11:28 am
Location: Southampton, Hampshire UK

Post by PetrolDave » Tue Feb 10, 2009 1:08 pm

grizz wrote:Get the HEX-USB-CAN Lead .
Second that, I got the HEX-COM+CAN then changed my laptop for a newer one and had to trade it in for a HEX-USB+CAN.

frazered
3rd Gear
Posts: 492
Joined: Fri Feb 02, 2007 3:14 pm
Location: nw

Post by frazered » Tue Feb 10, 2009 10:12 pm

get this one

http://www.gendan.co.uk/product_VCHU.html

by the time you add exchange rate costs and import tax it is the same or cheaper to buy from a UK dealer...

User avatar
KiwiRS4
2nd Gear
Posts: 104
Joined: Wed Jan 21, 2009 11:48 pm

Post by KiwiRS4 » Fri Feb 13, 2009 12:09 am

If your looking for a more budget approach...

Just brought a VAG-COM USB cable for the RS4 B5 off wePay £14 (seller gps-ppc). Very prompt delivery, very good support, CD comes with the USB driver and 409.1 from Ross-Tech. I'm using it on a virtiual macine inside VMware Fusion on a Macbook and it works a treat. Car was running limp in 1st gear, scanned the faults, cleared them out, now it's running like a dream again. If your not looking for all the bells and whistles like the newer OEM Ross-Tech versions then this maybe the solution for you. If your based in the Windsor area I'd be happy to give a demo.

Post Reply

Return to “DTC / VCDS”

Who is online

Users browsing this forum: No registered users and 20 guests