changing to 20"s,

[rpsxr]

i used to run final offset 26 on 20s, although i'm pretty sure these used to be 20x9.5. but you can prob throw that into some calculator webpage. no rubbing on the back and only very occasional on the front top nuts.

hth

robert

[MartayMcFly]

So there's plenty of room to space them out from ET60. I don't want rubbing, even slightly, don't want to have to take out the bolts or anything either. ET26 on 9.5" = ET20 on 9" (for the same face), so will likely aim for 30mm adapters.