Hand brake cable securing clamp
Re: Hand brake cable securing clamp
It’s almost like you live in the North. By the sea.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
-
steve2003rs6
- Cruising
- Posts: 2956
- Joined: Mon Aug 19, 2019 7:43 pm
Re: Hand brake cable securing clamp
Ha ha ha. I can spit out of my bedroom window into the sea.
Well almost.
No not north. East coast.
Well almost.
No not north. East coast.
Re: Hand brake cable securing clamp
North of the Watford gap though.
"not a professional engineer, mechanic and mechanist"
-
steve2003rs6
- Cruising
- Posts: 2956
- Joined: Mon Aug 19, 2019 7:43 pm
Re: Hand brake cable securing clamp
Yeah. Quite a bit North from Watford Gap.
Re: Hand brake cable securing clamp
That’s counts as north to us suvvernerz. 
"not a professional engineer, mechanic and mechanist"
Re: Hand brake cable securing clamp
Anywhere past Winchester and I get a nose bleed 
Avus Avant, RNS-E mk2 with sds and Bluetooth, Milltek, Hotchkis, Bilstein, Forge, ITG, A.C.E, Wagner, FBMFSW, MTM.
-
steve2003rs6
- Cruising
- Posts: 2956
- Joined: Mon Aug 19, 2019 7:43 pm
Re: Hand brake cable securing clamp
Oops. Original except coil overs.
I forgot I have phaeton calipers on the front and another set of alloys.
Still need to get the original calipers away for a refurb.
No hurry as yet. It will be after cambelt, full service and door locks visit in April.
I forgot I have phaeton calipers on the front and another set of alloys.
Still need to get the original calipers away for a refurb.
No hurry as yet. It will be after cambelt, full service and door locks visit in April.
-
steve2003rs6
- Cruising
- Posts: 2956
- Joined: Mon Aug 19, 2019 7:43 pm
Re: Hand brake cable securing clamp
ChrisA. Don’t need armed protection up North.
We just don’t go out after dark.
We just don’t go out after dark.
-
steve2003rs6
- Cruising
- Posts: 2956
- Joined: Mon Aug 19, 2019 7:43 pm
Re: Hand brake cable securing clamp
Clamps on route from Audi Tradition In Germany via France.
Very very grateful to a fellow member on here for getting them on my behalf.
Very very grateful to a fellow member on here for getting them on my behalf.
-
steve2003rs6
- Cruising
- Posts: 2956
- Joined: Mon Aug 19, 2019 7:43 pm
Re: Hand brake cable securing clamp
-
steve2003rs6
- Cruising
- Posts: 2956
- Joined: Mon Aug 19, 2019 7:43 pm
Re: Hand brake cable securing clamp
The above clamps received. And they do look rather nice.
Many thanks to the member who got them on my behalf.
Forever grateful.
Many thanks to the member who got them on my behalf.
Forever grateful.
Re: Hand brake cable securing clamp
Where I’m doing my strip down I currently have a set that are in good condition. If anyone things they’ll be useful to borrow them to make a template from then I’m happy to send them to you for a week or so?
Who is online
Users browsing this forum: Cunningstunt and 89 guests