Rattle from engine when shut off
Rattle from engine when shut off
Anyone else ever notice or had this? Engine has only done 40k
- Bladerider
- 4th Gear
- Posts: 516
- Joined: Mon Nov 28, 2005 3:49 pm
- Location: Speedfreak County !!
- Contact:
Re: Rattle from engine when shut off
Chain tensioner ??
07 RS4 Avus Avant : Usual spec with Buckets+FBSW+iPod dock+TV etc...100k+
Thanks to GBH Motorsport MRC Tuning VirdeeAuto Dubstep AwesomeGTI Wallachie Trups
H&R - Coilovers ARBs Spacers : 034 - RearArms Droplinks BilletMounts StrutTops : Eibach FrontArms : Powerflex Bushes
MRC - Stage2 Map+codeouts Stage2 Inlet+7mm gasket Stage2 deCarbon CAF : BMC Filter : Milltek Decats NonRes
Anthracite Alloys : Advan Neovas : Ferodo Pads+Castrol SRF : HEL Brakelines : Trups LED lighting
Thanks to GBH Motorsport MRC Tuning VirdeeAuto Dubstep AwesomeGTI Wallachie Trups
H&R - Coilovers ARBs Spacers : 034 - RearArms Droplinks BilletMounts StrutTops : Eibach FrontArms : Powerflex Bushes
MRC - Stage2 Map+codeouts Stage2 Inlet+7mm gasket Stage2 deCarbon CAF : BMC Filter : Milltek Decats NonRes
Anthracite Alloys : Advan Neovas : Ferodo Pads+Castrol SRF : HEL Brakelines : Trups LED lighting
Re: Rattle from engine when shut off
Usually flywheel noise nothing really to be concerned about. May need replacing eventually
-
- 3rd Gear
- Posts: 378
- Joined: Thu Feb 13, 2014 10:42 pm
Re: Rattle from engine when shut off
Chain tensioner is usually on start up
Rs4 b7 In avus silver with b14 Bilstein coilovers, centre resonator delete with x pipe and piggie cats gutted
Headlights detangoed trups led kit drl reverse and numberplate kit
Previous audi
rs6 c5 - mrc stage 2 remap-itg filters-forge dumpers-center decat with miltek kw coilovers- h and r
I call her the growler lol
Headlights detangoed trups led kit drl reverse and numberplate kit
Previous audi
rs6 c5 - mrc stage 2 remap-itg filters-forge dumpers-center decat with miltek kw coilovers- h and r
I call her the growler lol
Re: Rattle from engine when shut off
Lightweight single mass flywheel?
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads
Re: Rattle from engine when shut off
Hi Rickster, is there an audible sound on startup from the timing chain, on the RS4, I would assume only for a few seconds until oil pressure builds up? Cheers
-
- 3rd Gear
- Posts: 378
- Joined: Thu Feb 13, 2014 10:42 pm
Re: Rattle from engine when shut off
I had it on my c5 rs6 and sounded awful for about 4-5 secs on start up sound like a bag of spanners usually first start of the day worse on a cold day
Rs4 b7 In avus silver with b14 Bilstein coilovers, centre resonator delete with x pipe and piggie cats gutted
Headlights detangoed trups led kit drl reverse and numberplate kit
Previous audi
rs6 c5 - mrc stage 2 remap-itg filters-forge dumpers-center decat with miltek kw coilovers- h and r
I call her the growler lol
Headlights detangoed trups led kit drl reverse and numberplate kit
Previous audi
rs6 c5 - mrc stage 2 remap-itg filters-forge dumpers-center decat with miltek kw coilovers- h and r
I call her the growler lol
Re: Rattle from engine when shut off
Thanks Rickster, but on your RS4 B7 or any RS4 B7 I assume there's no audible sound or rattle on startup from chain when cold, I only ask as when viewing I like to have a good listen to engine, and just wondered if it was a common trait with these engines, a rattle on startup?
-
- 4th Gear
- Posts: 533
- Joined: Tue May 03, 2011 10:55 am
- Location: Scotland somewhere
Re: Rattle from engine when shut off
these engines never rattle on startup , its the S4 engine which does that due to cheap internals ,RS4 is completely different , different chain different steel guides instead of the cheap nylon ones the engine is all over totally different , lots of folk seem to thing it s 4,2 , so its the same , eh no its not , there is no components in the engine which is from S4, nothing !
Phantom black saloon ,PES M112 Supercharged 520ps/595nm K&N filter, 100 cell milltek cats,res valved milltek system. 8 and 10mm H&R spacers.H&R roll bars, "smoke chrome " alloy refurb. JHM Quickshifter, Bilstein B16 coilovers , uprated diff mount ,50/50 devils own WM kit so 1.4 litres/min in intake approx 10% more power and torque
1/4 mile 12.01 secs 123.5mph
1/4 mile 12.01 secs 123.5mph
Re: Rattle from engine when shut off
Thanks for clarification rwilson cheers Jimbob!rwilsonrs4 wrote: ↑Thu Nov 09, 2017 11:01 pmthese engines never rattle on startup , its the S4 engine which does that due to cheap internals ,RS4 is completely different , different chain different steel guides instead of the cheap nylon ones the engine is all over totally different , lots of folk seem to thing it s 4,2 , so its the same , eh no its not , there is no components in the engine which is from S4, nothing !
Who is online
Users browsing this forum: Sass1 and 69 guests