Folks just picked up my new RS6 last week and made sure the geometry had been checked, the thing is the front camber is -1.15 on the left and -0.51 on the right. So I checked a couple of posts and there were similar settings shown, but surely they should both be -1.15?
Marc
Geometry Settings
Re: Geometry Settings
Answer is it's within tolerance for anyone wondering.
Standard is 1 deg and 8 mins so 51 mins is within their +\-23 mins
Standard is 1 deg and 8 mins so 51 mins is within their +\-23 mins
Re: Geometry Settings
Mine is lowered so I'd expect more negative camber; mine are -2.18 and -2.08.
And not much you can go about it either as there is no adjustment for front camber without fitting adjustable arms (which I haven't seen for the C7 yet).
And not much you can go about it either as there is no adjustment for front camber without fitting adjustable arms (which I haven't seen for the C7 yet).
Re: Geometry Settings
Bloody hell Mike, my track cars not even got that much camberMikeFish wrote:Mine is lowered so I'd expect more negative camber; mine are -2.18 and -2.08.
And not much you can go about it either as there is no adjustment for front camber without fitting adjustable arms (which I haven't seen for the C7 yet).
Must feel light during normal driving, but I guess you can push it hard into the corners
Marc
Who is online
Users browsing this forum: No registered users and 62 guests