Milltek Non Res

4.0 V8 40v biturbo TFSI - 553 bhp
4.0 V8 40v biturbo TFSI - 597 bhp (Performance)
Post Reply
User avatar
Iain
4th Gear
Posts: 813
Joined: Tue Jan 14, 2003 5:13 pm
Location: Cardiff

Milltek Non Res

Post by Iain » Sat Jan 21, 2017 4:19 pm

Big thanks to Wrekka for arranging the fitment of his Milltek onto the car; the lads at ADS were great!! OEM Sports exhaust is in the FS section

Its EPIC....... valves are also disconnected :bigblink:

https://youtu.be/-pEE7cwu-vg
2018 Brabus G63 Widestar
2017 RS6 PE -Nardo, Air, HUD, Pan.....Millie Non Res
2015 RS6 - with Added Milltek
2015 RRS - utter sh1te
2010 X5 4.0D M Sport Every conceivable extra
2010 X5 4.0D M Sport
2009 R8 V10 Manual
2004 Lambo Gallarado Manual
3 x 997 C4S / C2s
2003 Fezza 360 Spider - Airfix kit build quality
2007 M3 - car number 2 in the UK
2006 RS4 Avant
2000 RS4 MTM Stage 3 - R55 BYE
2001 RS4 - R500 FOR
1990 Dimma Cosworth H20 COS
2003 996 DMS Turbo
multiple 205's Dimmas

RS6chris!
Cruising
Posts: 3845
Joined: Sun Oct 25, 2009 8:55 pm
Location: North East(Teesside).

Re: Milltek Non Res

Post by RS6chris! » Sat Jan 21, 2017 5:07 pm

Welcome to the club

Best exhaust for the money IMO.
Panamera Turbo S e hybrid (again)
RS6 C8 carbon black(merlin)
Panamera Turbo S e hybrid
RS6 C8 launch edition
R8 V10 plus
C7 RS6 PE dynamic pack plus
C7 RS6
Porsche Panamera Turbo
C6 RS6 AVANT
RS4 B7
Golf R32 mk 5
BMW M3 E46
Golf R32 mk 5
Golf GTI mk 5
VW Passat 130d 4 motion
VW bora 150pd
Ford Mondeo Ghia X V6
Ford Focus zetec
Rover 214!!

User avatar
skirs6
5th Gear
Posts: 1498
Joined: Tue Dec 04, 2012 12:31 pm
Location: West Sussex

Re: Milltek Non Res

Post by skirs6 » Sat Jan 21, 2017 9:24 pm

Iain wrote:Big thanks to Wrekka for arranging the fitment of his Milltek onto the car; the lads at ADS were great!! OEM Sports exhaust is in the FS section

Its EPIC....... valves are also disconnected :bigblink:

https://youtu.be/-pEE7cwu-vg
Iain you beat me to it mate. Sounds great ( thumbs up )

Tadass910
5th Gear
Posts: 1312
Joined: Fri Nov 11, 2016 8:39 pm

Re: Milltek Non Res

Post by Tadass910 » Sun Jan 22, 2017 10:22 am

Iain wrote:Big thanks to Wrekka for arranging the fitment of his Milltek onto the car; the lads at ADS were great!! OEM Sports exhaust is in the FS section

Its EPIC....... valves are also disconnected :bigblink:

https://youtu.be/-pEE7cwu-vg

In real life it sounds even more brutal, why you disconnected valves? As I know they should be connected as you can go from comfort mode valves closed to dynamic valves open

E14STO
4th Gear
Posts: 598
Joined: Tue Apr 16, 2013 3:53 pm

Re: Milltek Non Res

Post by E14STO » Sun Jan 22, 2017 11:18 am

Exactly the question I had,
I like the pops on the std exhaust in sports mode (assume this is flaps open) and the car still retains this in the video.
Do the flaps even work in a full system?
Current -
R8 V10 Plus
Previous -
C7 RS6 Merlin, JBS stg3
997 Gen2 PDK Turbo
Nissan GTR (JM900R)
B7 RS4 TTS, Sepang, black optics, ceramics, miltek, cold air feed etc etc / leon Cupra
, B5 RS4(avus), 996 GT2, B5 RS4 (Misano), TVR Cerbera 4.5, Evo VII RS Sprint
Nissan GTI-R, Uno Turbo ie

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Milltek Non Res

Post by MikeFish » Sun Jan 22, 2017 11:43 am

The pops and bangs are pretty much controlled by the gearbox being in sport mode. It will pop and bang with flaps open or closed, they are just a bit louder when flaps are open.
Disconnecting the valves means the exhaust is noisier (but not popping) when in drive mode and you don't need to cycle drive modes to get the exhaust to make more noise. I only use drive select now to switch between hard or soft suspension. The rest is done by using the gearstick for drive or sport mode.

All Milltek systems for the C7 utilise the valves still, there is no non valved version at present.

E14STO
4th Gear
Posts: 598
Joined: Tue Apr 16, 2013 3:53 pm

Re: Milltek Non Res

Post by E14STO » Sun Jan 22, 2017 12:14 pm

Thanks
I like the gearshift and lift off pops/crackles - many don't!
Coming from a charged B7 with straight pipes and a "race" exhaust GTr (which tbh is beyond ridiculous loud) I'm used to noise!

Like the sound of the one on the vid.
Only seen miltek and ackro for the RS6 and cost as always Is ridiculous for the latter
Current -
R8 V10 Plus
Previous -
C7 RS6 Merlin, JBS stg3
997 Gen2 PDK Turbo
Nissan GTR (JM900R)
B7 RS4 TTS, Sepang, black optics, ceramics, miltek, cold air feed etc etc / leon Cupra
, B5 RS4(avus), 996 GT2, B5 RS4 (Misano), TVR Cerbera 4.5, Evo VII RS Sprint
Nissan GTI-R, Uno Turbo ie

User avatar
Iain
4th Gear
Posts: 813
Joined: Tue Jan 14, 2003 5:13 pm
Location: Cardiff

Re: Milltek Non Res

Post by Iain » Sun Jan 22, 2017 2:26 pm

Tadass910 wrote:
In real life it sounds even more brutal, why you disconnected valves? As I know they should be connected as you can go from comfort mode valves closed to dynamic valves open

I unplugged the valves on the OEM and didn't cover them up properly (numpty that I am); the connectors corroded so wouldn't plug back in - new ones on order hence the disconnected; had some fun with a green Huracan yesterday - theres not a lot in it!! :bigblink:
2018 Brabus G63 Widestar
2017 RS6 PE -Nardo, Air, HUD, Pan.....Millie Non Res
2015 RS6 - with Added Milltek
2015 RRS - utter sh1te
2010 X5 4.0D M Sport Every conceivable extra
2010 X5 4.0D M Sport
2009 R8 V10 Manual
2004 Lambo Gallarado Manual
3 x 997 C4S / C2s
2003 Fezza 360 Spider - Airfix kit build quality
2007 M3 - car number 2 in the UK
2006 RS4 Avant
2000 RS4 MTM Stage 3 - R55 BYE
2001 RS4 - R500 FOR
1990 Dimma Cosworth H20 COS
2003 996 DMS Turbo
multiple 205's Dimmas

E14STO
4th Gear
Posts: 598
Joined: Tue Apr 16, 2013 3:53 pm

Re: Milltek Non Res

Post by E14STO » Sun Jan 22, 2017 5:05 pm

Running 730ish?
Hp among tuners seems to be similar but trq seems to vary.
Current -
R8 V10 Plus
Previous -
C7 RS6 Merlin, JBS stg3
997 Gen2 PDK Turbo
Nissan GTR (JM900R)
B7 RS4 TTS, Sepang, black optics, ceramics, miltek, cold air feed etc etc / leon Cupra
, B5 RS4(avus), 996 GT2, B5 RS4 (Misano), TVR Cerbera 4.5, Evo VII RS Sprint
Nissan GTI-R, Uno Turbo ie

User avatar
Iain
4th Gear
Posts: 813
Joined: Tue Jan 14, 2003 5:13 pm
Location: Cardiff

Re: Milltek Non Res

Post by Iain » Sun Jan 22, 2017 6:34 pm

Car std at the moment.....quick enough - the huracan didn't get past me :FIREdevil:
2018 Brabus G63 Widestar
2017 RS6 PE -Nardo, Air, HUD, Pan.....Millie Non Res
2015 RS6 - with Added Milltek
2015 RRS - utter sh1te
2010 X5 4.0D M Sport Every conceivable extra
2010 X5 4.0D M Sport
2009 R8 V10 Manual
2004 Lambo Gallarado Manual
3 x 997 C4S / C2s
2003 Fezza 360 Spider - Airfix kit build quality
2007 M3 - car number 2 in the UK
2006 RS4 Avant
2000 RS4 MTM Stage 3 - R55 BYE
2001 RS4 - R500 FOR
1990 Dimma Cosworth H20 COS
2003 996 DMS Turbo
multiple 205's Dimmas

wrekka
5th Gear
Posts: 1480
Joined: Sat Oct 02, 2010 3:58 pm

Re: Milltek Non Res

Post by wrekka » Sun Jan 22, 2017 8:54 pm

No problems Iain, sorry I didn't get chance to meet you in person! Enjoy!
Sold: 2012 RS3 APR St2 exclusive buckets!
Sold: 2014 Audi S4 Avant Black Edition (too slow as a stock car-doesn't sound good);
2016 RS6 performance with Non-res milltek (gutted to sell it) ;
2014 C7, Misano c6 mrc stage 2. AAS Custom Exhaust, cat bypass, itg filters. 731ps 1058nm. Superrbike quick!
TTS RS4 -amazing machine,
Previous:
many, many cars; all great and well-remembered!

Tadass910
5th Gear
Posts: 1312
Joined: Fri Nov 11, 2016 8:39 pm

Re: Milltek Non Res

Post by Tadass910 » Sun Jan 22, 2017 9:17 pm

Iain wrote:
Tadass910 wrote:
In real life it sounds even more brutal, why you disconnected valves? As I know they should be connected as you can go from comfort mode valves closed to dynamic valves open

I unplugged the valves on the OEM and didn't cover them up properly (numpty that I am); the connectors corroded so wouldn't plug back in - new ones on order hence the disconnected; had some fun with a green Huracan yesterday - theres not a lot in it!! :bigblink:
Okay understood, because I have also non resonated Miltek and my valves are in place, I can control open or close them using audi mmi going from dynamic valves open to comfort valves closed

Post Reply

Return to “RS6 (C7 Typ 4G) 2013-2018”

Who is online

Users browsing this forum: No registered users and 63 guests