Deano's B8 RS4

Start a topic to show off your car or keep us updated on your journey
User avatar
Shinobi675
5th Gear
Posts: 1367
Joined: Thu Sep 04, 2014 9:04 pm

Re: Deano's B8 RS4

Post by Shinobi675 » Tue Sep 27, 2016 6:08 pm

Cheers dude ;)
996 C4S, B8 RS4, CBR600RR & a little ZXR400

User avatar
Covkiller
Top Gear
Posts: 2349
Joined: Fri Mar 28, 2008 3:44 pm
Location: Coventry

Re: Deano's B8 RS4

Post by Covkiller » Wed Sep 28, 2016 7:55 pm

Shinobi675 wrote:In sport there's minor drone at about 1,800. But... I've never actually noticed it in the real world because if I'm in sport, I'm not idling...

I'm at the ring this weekend; I'm sure I'll get a chance and will try and get picture in picture of the rev counter and the exhaust from outside. Might see if I can get a lap :)

I'd also like to get a shot of a drive by, I've no idea what it's like from the outside other than when my wife took it to the gym one morning and I'd left it on dynamic. Woke me up with a shock! Sounded awesome, better then the Lamborghini across the road...
Hey, look out for my mate NIKU (reg) in a Fiesta Yellow wrap Lamborghini Gallardo, as he's at the ring this weekend too
If you see him tell him you know Mark
:thumbs:
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs. Sold Sept 2019. Now rocking an F80 M3

User avatar
Shinobi675
5th Gear
Posts: 1367
Joined: Thu Sep 04, 2014 9:04 pm

Re: Deano's B8 RS4

Post by Shinobi675 » Thu Sep 29, 2016 6:44 pm

Covkiller wrote:
Shinobi675 wrote:In sport there's minor drone at about 1,800. But... I've never actually noticed it in the real world because if I'm in sport, I'm not idling...

I'm at the ring this weekend; I'm sure I'll get a chance and will try and get picture in picture of the rev counter and the exhaust from outside. Might see if I can get a lap :)

I'd also like to get a shot of a drive by, I've no idea what it's like from the outside other than when my wife took it to the gym one morning and I'd left it on dynamic. Woke me up with a shock! Sounded awesome, better then the Lamborghini across the road...
Hey, look out for my mate NIKU (reg) in a Fiesta Yellow wrap Lamborghini Gallardo, as he's at the ring this weekend too
If you see him tell him you know Mark
:thumbs:
It can't really be called fiesta yellow! Will say hello, weather is looking good for Sunday and Monday thankfully. Pouring with rain on the Saturday but it's only open for a couple of hours in the evening so no fuss there.
996 C4S, B8 RS4, CBR600RR & a little ZXR400

User avatar
DeanoC
4th Gear
Posts: 537
Joined: Wed Aug 10, 2016 4:53 am

Re: Deano's B8 RS4

Post by DeanoC » Mon Oct 03, 2016 6:51 pm

Finally got around to sorting the swirls.

Image

Before:

https://youtu.be/uaaQV59QSLk

After:

https://youtu.be/39sqZ1vG0e8

The door trim come up perfect:

Image

Next job is a coat of Gtechniq Crystal Serum and Exo 2

User avatar
DeanoC
4th Gear
Posts: 537
Joined: Wed Aug 10, 2016 4:53 am

Re: Deano's B8 RS4

Post by DeanoC » Tue Oct 04, 2016 6:52 pm

Gtechniq Crystal Serum and 2 layers of exo 2:

Image

doodlebug
Cruising
Posts: 5833
Joined: Thu Dec 18, 2008 11:56 am
Location: Somewhere. Maybe.

Re: Deano's B8 RS4

Post by doodlebug » Tue Oct 04, 2016 6:53 pm

Don't cock it up else you'll be sanding it off!

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Deano's B8 RS4

Post by MikeFish » Tue Oct 04, 2016 8:33 pm

That's why it's for the pros only.

User avatar
DeanoC
4th Gear
Posts: 537
Joined: Wed Aug 10, 2016 4:53 am

Re: Deano's B8 RS4

Post by DeanoC » Tue Oct 18, 2016 12:33 pm

@shinobi675 how did you get on at the ring? Did you get a chance to grab any footage of the JCWeldFab?

User avatar
DeanoC
4th Gear
Posts: 537
Joined: Wed Aug 10, 2016 4:53 am

Re: Deano's B8 RS4

Post by DeanoC » Tue Oct 18, 2016 3:42 pm

I had the firmware updated today to the latest version. 1hr 10 install! Noticed a few improvements already like voice control and map speed.

Image

User avatar
DeanoC
4th Gear
Posts: 537
Joined: Wed Aug 10, 2016 4:53 am

Re: Deano's B8 RS4

Post by DeanoC » Fri Nov 25, 2016 5:28 pm

So I might have spent the day with Trups to try something new on the B8. More info to follow:

Image

Image

Image

User avatar
DeanoC
4th Gear
Posts: 537
Joined: Wed Aug 10, 2016 4:53 am

Re: Deano's B8 RS4

Post by DeanoC » Fri Dec 02, 2016 10:58 pm

Carbon badges on (fake for now to lose the chrome and to practice as the real ones don't turn up until Jan)"

Image

Image

I also fitted the Osram Clear Blue Intense bulbs from Trups in my modified lights:

Image

Really happy with them and great now i have them setup right.

User avatar
DeanoC
4th Gear
Posts: 537
Joined: Wed Aug 10, 2016 4:53 am

Re: Deano's B8 RS4

Post by DeanoC » Sat Dec 03, 2016 2:40 pm


BlueIn2Red
Neutral
Posts: 30
Joined: Mon Jun 30, 2014 2:15 pm

Re: Deano's B8 RS4

Post by BlueIn2Red » Tue Dec 27, 2016 11:05 am

DeanoC wrote:Another little tweak. I plugged the vacuum input for the exhaust valve actuators.

I'm much happier. It's sounds as it should now all the time. In order of noticeable difference:

- Rumble on let off and the up and down shift farts and blips between roughly 1k and 4k are much more noticeable

- exhaust noise on acceleration between 1k and 4k. Again quite difference - much deeper

- smoothness between 1k and 4k. Slight but definitely noticeable

There is a slight drone in D7 under load below 50mph but to be honest it's still less than what i expected this car to make in quiet mode. Have the stereo on over 10 and you can't hear it at all.

I was going to use a bolt but i found this random thing in the same drawer as the zipties and it was a nicer fit.

Image

Image

Another thing i noticed was having the rear seats folded down (which i did on my return leg) makes the exhaust much louder in the cabin.
Sorry for the bump, but when doing this modification do you just plug the pipe or do you also need to seal off the plastic nozzle thing the pipe previously attached to as well?

User avatar
DeanoC
4th Gear
Posts: 537
Joined: Wed Aug 10, 2016 4:53 am

Re: Deano's B8 RS4

Post by DeanoC » Tue Dec 27, 2016 11:07 am

Just plug the pipe mate. The other end is exhaust side so the vacuum is gone and the flaps will stay open as they are spring loaded

BlueIn2Red
Neutral
Posts: 30
Joined: Mon Jun 30, 2014 2:15 pm

Re: Deano's B8 RS4

Post by BlueIn2Red » Tue Dec 27, 2016 12:26 pm

Cheers!

Post Reply

Return to “Readers' Rides”

Who is online

Users browsing this forum: No registered users and 24 guests