Asking for a friend to see if the Ceramic rear callipers are the same as the steel ones?. Both the C6 callipers are the same apart from the colour.
Thanks.
Ceramic rear callipers.
Ceramic rear callipers.
Too much power is barely enough.
Re: Ceramic rear callipers.
LittleDevil says they are different as the ceramic rear discs are a different size to the steel ones on the C7 - 370x30mm vs 356x22mm
viewtopic.php?f=64&t=111733#p705900
The calipers also have different part numbers -
Ceramic - 4G0615403B
Steel - 4G0615403C
and look slightly different in Etka - Ceramic & Steel
viewtopic.php?f=64&t=111733#p705900
The calipers also have different part numbers -
Ceramic - 4G0615403B
Steel - 4G0615403C
and look slightly different in Etka - Ceramic & Steel
Last edited by IanH755 on Thu Aug 11, 2016 1:47 pm, edited 1 time in total.
***OLD*** Daytona C5 RS6 Avant - MRC'd - 500HP & 820NM (PistonHeads Link).
***NEW*** Daytona C6 RS6 Avant - MRC'd - 925HP & 1150NM (PistonHeads Link)
***NEW*** Daytona C6 RS6 Avant - MRC'd - 925HP & 1150NM (PistonHeads Link)
Re: Ceramic rear callipers.
I thought the c6 ones were different.......
Volvo XC90
C7 - RS6
C6 - RS6
B5 - RS4
C7 - RS6
C6 - RS6
B5 - RS4
Re: Ceramic rear callipers.
C6 rear calipers are the same ones with a different paint finish and use the same size disc (356x28mm) regardless of material.
***OLD*** Daytona C5 RS6 Avant - MRC'd - 500HP & 820NM (PistonHeads Link).
***NEW*** Daytona C6 RS6 Avant - MRC'd - 925HP & 1150NM (PistonHeads Link)
***NEW*** Daytona C6 RS6 Avant - MRC'd - 925HP & 1150NM (PistonHeads Link)
Who is online
Users browsing this forum: No registered users and 79 guests