Very stubborn brake disc

All things related to Audi and other manufacturers
Post Reply
boombastik
3rd Gear
Posts: 351
Joined: Tue Jul 02, 2013 8:32 pm
Location: Aberdeenshire

Very stubborn brake disc

Post by boombastik » Thu Feb 12, 2015 9:18 pm

Well tonight I had to change the font discs on my wife's R32 mk5 golf, I reckon 20min a side easy.

So straight home from work changed and car in the garage started with the drivers side which took me well over an hour just to get the disc off.

See pics, ended up having to split the disc from the hub using my heavy hammer and then using the grinder to split the centre of the disc to get it off.
Attachments
image.jpg
image.jpg
image.jpg
RS4 B7 Saloon Milltek Cat back, CAF with piper cross panel, Wrapped optics black, Satin black wheels, TRUPS LED front DRL's & sides, goodridge braided hoses, H&R 10/15mm spares front/rear
Bilstien B16 coilovers with H&R anti roll bars
MRC stage 2 deflapped, precat gutted 439ps 481nm torque
1/4 mile time 12.884sec

My clutch replacement write up can be found here viewtopic.php?f=35&t=116929&start=15
Top
ASC
3rd Gear
Posts: 291
Joined: Wed Mar 21, 2012 7:46 pm
Location: Aberdeenshire

Re: Very stubborn brake disc

Post by ASC » Fri Feb 13, 2015 10:52 am

Glad I saw this.. I was going to chat you up about doing my new discs and pads but on second thoughts... :wink:

Just kiddin mate, that looks a right ball ache! OEM replacements or is it getting an upgrade?
Current - 07 Sprint Blue RS4 Avant Black optics / Buckets / FBSW / MRC Stage 2 / De flapped Manifold / CAF / BMC filter / Decat / Non Res Miltek / Bilstein B16's / Tarox discs, pads and lines / H&R ARBs / 19x9.5 Ispiri ISR1 wheels / MPSS tyres / DTM carbon splitter
Previous - 06 Sprint Blue B7 S4 Avant JHM 91 tune / 2.5" Custom Cat-less DP's / Miltek Non Res Cat back / BMC filter / H&R springs / 19" Fox MS007 wheels/Good Year F1's / EBC TG discs / Yellow stuff pads
Top
bam_bam
Cruising
Posts: 14440
Joined: Mon Jan 18, 2010 9:08 pm
Location: London

Re: Very stubborn brake disc

Post by bam_bam » Fri Feb 13, 2015 10:55 am

Wait what? How is that possible, had the hat seized to the hub? What was holding it fast?
No matter where you go, there you are.
Top
boombastik
3rd Gear
Posts: 351
Joined: Tue Jul 02, 2013 8:32 pm
Location: Aberdeenshire

Re: Very stubborn brake disc

Post by boombastik » Fri Feb 13, 2015 11:07 am

bam_bam wrote:Wait what? How is that possible, had the hat seized to the hub? What was holding it fast?
the HAT was held firmly on the HUB with rust, ive never seen anything like this before ok some have had to have a good batter from behind to get moving but no matter how hard i hit it it wasnt shifting
RS4 B7 Saloon Milltek Cat back, CAF with piper cross panel, Wrapped optics black, Satin black wheels, TRUPS LED front DRL's & sides, goodridge braided hoses, H&R 10/15mm spares front/rear
Bilstien B16 coilovers with H&R anti roll bars
MRC stage 2 deflapped, precat gutted 439ps 481nm torque
1/4 mile time 12.884sec

My clutch replacement write up can be found here viewtopic.php?f=35&t=116929&start=15
Top
boombastik
3rd Gear
Posts: 351
Joined: Tue Jul 02, 2013 8:32 pm
Location: Aberdeenshire

Re: Very stubborn brake disc

Post by boombastik » Fri Feb 13, 2015 11:08 am

ASC wrote:Glad I saw this.. I was going to chat you up about doing my new discs and pads but on second thoughts... :wink:

Just kiddin mate, that looks a right ball ache! OEM replacements or is it getting an upgrade?

OEM replacement its only the wifes car min :biggrin3:

hey if your needing your brakes done by all means give me a shout i have the tools & have the knowledge :wink:
RS4 B7 Saloon Milltek Cat back, CAF with piper cross panel, Wrapped optics black, Satin black wheels, TRUPS LED front DRL's & sides, goodridge braided hoses, H&R 10/15mm spares front/rear
Bilstien B16 coilovers with H&R anti roll bars
MRC stage 2 deflapped, precat gutted 439ps 481nm torque
1/4 mile time 12.884sec

My clutch replacement write up can be found here viewtopic.php?f=35&t=116929&start=15
Top
bam_bam
Cruising
Posts: 14440
Joined: Mon Jan 18, 2010 9:08 pm
Location: London

Re: Very stubborn brake disc

Post by bam_bam » Fri Feb 13, 2015 11:16 am

boombastik wrote:...had to have a good batter from behind to get moving but no matter how hard I hit it it wasn't shifting.
*snigger*
No matter where you go, there you are.
Top
ASC
3rd Gear
Posts: 291
Joined: Wed Mar 21, 2012 7:46 pm
Location: Aberdeenshire

Re: Very stubborn brake disc

Post by ASC » Fri Feb 13, 2015 11:26 am

I'll take you up on that offer mate. I have a full replacement set of discs and pads coming from EBC after all that shuddering/warping palava!
Current - 07 Sprint Blue RS4 Avant Black optics / Buckets / FBSW / MRC Stage 2 / De flapped Manifold / CAF / BMC filter / Decat / Non Res Miltek / Bilstein B16's / Tarox discs, pads and lines / H&R ARBs / 19x9.5 Ispiri ISR1 wheels / MPSS tyres / DTM carbon splitter
Previous - 06 Sprint Blue B7 S4 Avant JHM 91 tune / 2.5" Custom Cat-less DP's / Miltek Non Res Cat back / BMC filter / H&R springs / 19" Fox MS007 wheels/Good Year F1's / EBC TG discs / Yellow stuff pads
Top
boombastik
3rd Gear
Posts: 351
Joined: Tue Jul 02, 2013 8:32 pm
Location: Aberdeenshire

Re: Very stubborn brake disc

Post by boombastik » Fri Feb 13, 2015 11:27 am

ASC wrote:I'll take you up on that offer mate. I have a full replacement set of discs and pads coming from EBC after all that shuddering/warping palava!
aye no problem should only take 20min a wheel and i recently bought the correct tool for winding back the rear caliper pistons
RS4 B7 Saloon Milltek Cat back, CAF with piper cross panel, Wrapped optics black, Satin black wheels, TRUPS LED front DRL's & sides, goodridge braided hoses, H&R 10/15mm spares front/rear
Bilstien B16 coilovers with H&R anti roll bars
MRC stage 2 deflapped, precat gutted 439ps 481nm torque
1/4 mile time 12.884sec

My clutch replacement write up can be found here viewtopic.php?f=35&t=116929&start=15
Top
ASC
3rd Gear
Posts: 291
Joined: Wed Mar 21, 2012 7:46 pm
Location: Aberdeenshire

Re: Very stubborn brake disc

Post by ASC » Fri Feb 13, 2015 11:28 am

bam_bam wrote:
boombastik wrote:...had to have a good batter from behind to get moving but no matter how hard I hit it it wasn't shifting.
*snigger*
lol Hope I'm not in for a battering from behind!
Current - 07 Sprint Blue RS4 Avant Black optics / Buckets / FBSW / MRC Stage 2 / De flapped Manifold / CAF / BMC filter / Decat / Non Res Miltek / Bilstein B16's / Tarox discs, pads and lines / H&R ARBs / 19x9.5 Ispiri ISR1 wheels / MPSS tyres / DTM carbon splitter
Previous - 06 Sprint Blue B7 S4 Avant JHM 91 tune / 2.5" Custom Cat-less DP's / Miltek Non Res Cat back / BMC filter / H&R springs / 19" Fox MS007 wheels/Good Year F1's / EBC TG discs / Yellow stuff pads
Top
ASC
3rd Gear
Posts: 291
Joined: Wed Mar 21, 2012 7:46 pm
Location: Aberdeenshire

Re: Very stubborn brake disc

Post by ASC » Fri Feb 13, 2015 11:29 am

boombastik wrote:
ASC wrote:I'll take you up on that offer mate. I have a full replacement set of discs and pads coming from EBC after all that shuddering/warping palava!
aye no problem should only take 20min a wheel and i recently bought the correct tool for winding back the rear caliper pistons
You da man!! I should get the set today or Monday, give you a shout next week sometime to arrange a convenient time.
Current - 07 Sprint Blue RS4 Avant Black optics / Buckets / FBSW / MRC Stage 2 / De flapped Manifold / CAF / BMC filter / Decat / Non Res Miltek / Bilstein B16's / Tarox discs, pads and lines / H&R ARBs / 19x9.5 Ispiri ISR1 wheels / MPSS tyres / DTM carbon splitter
Previous - 06 Sprint Blue B7 S4 Avant JHM 91 tune / 2.5" Custom Cat-less DP's / Miltek Non Res Cat back / BMC filter / H&R springs / 19" Fox MS007 wheels/Good Year F1's / EBC TG discs / Yellow stuff pads
Top
boombastik
3rd Gear
Posts: 351
Joined: Tue Jul 02, 2013 8:32 pm
Location: Aberdeenshire

Re: Very stubborn brake disc

Post by boombastik » Fri Feb 13, 2015 11:37 am

ok no problem, next saturday im taking the golf for MOT to glenkindie so prbably the following saturday as long as you can wait till then
RS4 B7 Saloon Milltek Cat back, CAF with piper cross panel, Wrapped optics black, Satin black wheels, TRUPS LED front DRL's & sides, goodridge braided hoses, H&R 10/15mm spares front/rear
Bilstien B16 coilovers with H&R anti roll bars
MRC stage 2 deflapped, precat gutted 439ps 481nm torque
1/4 mile time 12.884sec

My clutch replacement write up can be found here viewtopic.php?f=35&t=116929&start=15
Top
ASC
3rd Gear
Posts: 291
Joined: Wed Mar 21, 2012 7:46 pm
Location: Aberdeenshire

Re: Very stubborn brake disc

Post by ASC » Fri Feb 13, 2015 11:56 am

28th? Aye that should work, I have MOT on the 2nd.
Current - 07 Sprint Blue RS4 Avant Black optics / Buckets / FBSW / MRC Stage 2 / De flapped Manifold / CAF / BMC filter / Decat / Non Res Miltek / Bilstein B16's / Tarox discs, pads and lines / H&R ARBs / 19x9.5 Ispiri ISR1 wheels / MPSS tyres / DTM carbon splitter
Previous - 06 Sprint Blue B7 S4 Avant JHM 91 tune / 2.5" Custom Cat-less DP's / Miltek Non Res Cat back / BMC filter / H&R springs / 19" Fox MS007 wheels/Good Year F1's / EBC TG discs / Yellow stuff pads
Top
boombastik
3rd Gear
Posts: 351
Joined: Tue Jul 02, 2013 8:32 pm
Location: Aberdeenshire

Re: Very stubborn brake disc

Post by boombastik » Fri Feb 13, 2015 12:14 pm

Perfect i might be slightly hung over that day as Im on a corporate doo at Ardo House on the 27th but thats fine
RS4 B7 Saloon Milltek Cat back, CAF with piper cross panel, Wrapped optics black, Satin black wheels, TRUPS LED front DRL's & sides, goodridge braided hoses, H&R 10/15mm spares front/rear
Bilstien B16 coilovers with H&R anti roll bars
MRC stage 2 deflapped, precat gutted 439ps 481nm torque
1/4 mile time 12.884sec

My clutch replacement write up can be found here viewtopic.php?f=35&t=116929&start=15
Top
Post Reply

Return to “General Car Chat”

Who is online

Users browsing this forum: No registered users and 137 guests