Power output

4.2 V8 32v Naturally Aspirated - 414 bhp
RsReilly
1st Gear
Posts: 59
Joined: Fri Jan 23, 2015 7:24 pm
Location: Glasgow

Power output

Post by RsReilly » Tue Jan 27, 2015 10:38 pm

What's the most power that's been seen on a tuned rs4 without going down the supercharging road?
Mine is currently 338ps, would the sport cats or a cat delete pipe give much more?

User avatar
JCviggen
5th Gear
Posts: 1061
Joined: Sat Nov 06, 2010 9:24 am
Location: Belgium / Russia

Re: Power output

Post by JCviggen » Tue Jan 27, 2015 10:43 pm

338? Just getting it to run right should get you 40 or 50 horsepower...

Do you mean 438?

Fastest NA I've seen was with a ludicrously expensive and elaborate German ram airbox. They claimed 470-480ps and it was a very quick car.
B7 RS4 saloon Misano red, comfy seats, JHM tune & JHM full exhaust with cats and resonators - gone.
C5 RS6 Avant Daytona/Cognac - gone.
981 Cayman GTS Gray/Orange.
My youtube

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Power output

Post by MikeFish » Tue Jan 27, 2015 10:48 pm

You have an issue. Most likely a vacuum problem. Need to sort that out first and see what power you've got.

How long ago was the carbon clean?

With your mods and a recent carbon clean I'd expect about 440bhp. Maybe up to 450 with a cat delete. A sports cat won't make much difference if you already have the gutted precats as the standard cat is 200cell same as some sports cats (Milltek do a 100cell too though so slightly less restrictive). If the carbon clean was a year or more ago then I'd expect you to be around the 410 mark. But 338ps is well low (even with a vacuum problem). Do the valves on your milltek still work?

The most I've seen from a NA B7 is about the 450bhp mark which is pretty much the same mods you have but with no cats.

Harris.
4th Gear
Posts: 731
Joined: Mon Sep 29, 2014 12:27 pm

Re: Power output

Post by Harris. » Tue Jan 27, 2015 10:51 pm

How do you check if your engine needs a carbon clean ?

RsReilly
1st Gear
Posts: 59
Joined: Fri Jan 23, 2015 7:24 pm
Location: Glasgow

Re: Power output

Post by RsReilly » Tue Jan 27, 2015 10:51 pm

Apologies, that should of read 438ps :bash:

RsReilly
1st Gear
Posts: 59
Joined: Fri Jan 23, 2015 7:24 pm
Location: Glasgow

Re: Power output

Post by RsReilly » Tue Jan 27, 2015 10:55 pm

Carbon clean was only done in June last year, yes the valves still work perfect on the milltek, it's pretty loud, if I opt for the delete pipe then I might need to wear earplugs

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Power output

Post by MikeFish » Tue Jan 27, 2015 10:55 pm

In that case, you might get another 10bhp from going catless but thats about the limit without charging.

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Power output

Post by MikeFish » Tue Jan 27, 2015 10:56 pm

Rs4reilly wrote:Carbon clean was only done in June last year, yes the valves still work perfect on the milltek, it's pretty loud, if I opt for the delete pipe then I might need to wear earplugs
I only asked about the valves as it might be an indication of vacuum issues but now we know you have 438ps then all is good.

RsReilly
1st Gear
Posts: 59
Joined: Fri Jan 23, 2015 7:24 pm
Location: Glasgow

Re: Power output

Post by RsReilly » Tue Jan 27, 2015 11:02 pm

Harris. wrote:How do you check if your engine needs a carbon clean ?
You need to get your car on a dyno and get a power test done, if your figures are low then it's time for a carbon clean, unfortunately every b7 rs4 needs this done, poor design by Audi.

RsReilly
1st Gear
Posts: 59
Joined: Fri Jan 23, 2015 7:24 pm
Location: Glasgow

Re: Power output

Post by RsReilly » Tue Jan 27, 2015 11:05 pm

MikeFish wrote:In that case, you might get another 10bhp from going catless but thats about the limit without charging.
Cheers Mike, have you heard any with the delete pipes?

Harris.
4th Gear
Posts: 731
Joined: Mon Sep 29, 2014 12:27 pm

Re: Power output

Post by Harris. » Tue Jan 27, 2015 11:15 pm

Rs4reilly wrote:
Harris. wrote:How do you check if your engine needs a carbon clean ?
You need to get your car on a dyno and get a power test done, if your figures are low then it's time for a carbon clean, unfortunately every b7 rs4 needs this done, poor design by Audi.

Oh right , id have to find someone in Essex to do it then

obikaii
1st Gear
Posts: 55
Joined: Wed Nov 12, 2014 10:28 pm

Re: Power output

Post by obikaii » Tue Jan 27, 2015 11:31 pm

You have a place near you in Essex Harris,called AMD,go to http://www.amdtuning.com & have a look.
B7 RS4 saloon,black,miltek,hi flo cats,MRC stage 2 remap,stage 2 manifold, CAF.
Previous,Z4m coupe,Tvr T350c,E46 M3 smg,R33 Nissan Gtr.
Bikes,Suzuki Gsxr 750,Kawasaki 600 ninjas.

Harris.
4th Gear
Posts: 731
Joined: Mon Sep 29, 2014 12:27 pm

Re: Power output

Post by Harris. » Tue Jan 27, 2015 11:33 pm

Thanks mate ,are they any good ?

SinghB7
2nd Gear
Posts: 121
Joined: Sat Oct 25, 2014 7:12 pm
Location: Walsall

Re: Power output

Post by SinghB7 » Wed Jan 28, 2015 12:46 am

Theres a RS4 on ebay for sale currently, 480bhp n/a mrc tuned it claims. No mention of mods done however.
Audi RS4 B7 Saloon 456ps MRC
Audi S3 8P 310bhp Revo
Audi S4 B5 Saloon 504ps MRC
Audi S4 B5 Saloon 320bhp Revo
Audi A4 B7 TDI Saloon 215bhp R TECH
:kissmyrings:

User avatar
Tile Diver
4th Gear
Posts: 715
Joined: Thu Sep 20, 2012 7:04 pm
Location: Hove, East Sussex

Re: Power output

Post by Tile Diver » Wed Jan 28, 2015 1:00 am

447 PS for mine!! :bigblink:
Attachments
MRC Tuning.pdf
(502.41 KiB) Downloaded 78 times
B7 RS4 Avant 2007 Daytona Grey
Black Optics / Ti Pack
SS Suspension +
Sunroof
H&R Hubcentric Spacers
Milltek Res / Valved Cat Back
Stage 2 MRC Map
Cold Air Feed
Carbon Clean
Pre-Cats Gutted
447 PS

If in doubt.. Power out!!

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: N9ATH and 113 guests