Anyone near Colchester area?

4.2 V8 32v Naturally Aspirated - 414 bhp
Post Reply
DavidRS4
4th Gear
Posts: 663
Joined: Thu Jan 19, 2012 11:16 am
Location: Colchester

Anyone near Colchester area?

Post by DavidRS4 » Sun Jun 15, 2014 8:38 pm

Looking for like minded RS4 people to meet up with. Nothing ever seems to happen around here or I don't know about it.

Anyone up for it?
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads

scaghead
Top Gear
Posts: 1799
Joined: Sun Dec 21, 2008 7:52 pm
Location: essex

Re: Anyone near Colchester area?

Post by scaghead » Sun Jun 15, 2014 8:44 pm

There are a few other essex members fella...I am near basildon.. May be better to have a look in the meets section, usually a meet just over in Kent every couple of months ..but if a few fancy a meet up I would be up for it..
R8 gen1 v10 plus white. Larini clubsport valved zorst.carbon side flicks,and fixed carbon spoiler.
Previous..RS4 Sprint blue loon..milltek non-res valved.revolution carbon air intake kit.cold air feed.carbon clean.MRC stage 2 remap..led interior lights.dectane led rear lights.led drls.Argon carbon oil splitter,race style front splitter,B and C door pillars and engine bottle cover..KW lowering springs.HEL brake lines all round.

User avatar
daytonamart
5th Gear
Posts: 1342
Joined: Sat Oct 01, 2011 2:59 pm
Location: IPSWICH

Re: Anyone near Colchester area?

Post by daytonamart » Sun Jun 15, 2014 8:52 pm

Hi David,

Last mini meet we had was at the Limes in Needham Market a couple of years back. I seem to remember you had a throat infection so couldn't attend. Kent meet is you best bet I reckon. Isn't there one next Sunday?
Gone B8.5 A5 Sportback Black Edition Plus Floret Silver
Current C6 A6 Avant Silver TDi S line snotter
Gone B7 RS4 Sprint Blue Avant
Gone 8P A3 Sportback Reflex Silver
Gone 8V A3 Saloon Daytona Grey
Gone B7 A4 Reflex Silver
Gone B7 RS4 Daytona Grey Avant

User avatar
The_Coat
4th Gear
Posts: 986
Joined: Thu Aug 09, 2012 11:03 pm
Location: Essex

Re: Anyone near Colchester area?

Post by The_Coat » Sun Jun 15, 2014 8:55 pm

I'll be up for an essex meet, think there is a few of us now.
RS4 Avant - Misano Red

DavidRS4
4th Gear
Posts: 663
Joined: Thu Jan 19, 2012 11:16 am
Location: Colchester

Re: Anyone near Colchester area?

Post by DavidRS4 » Sun Jun 15, 2014 9:42 pm

Definitely up for an Essex meet. Kent is miles away. Essex is a big county and I have seen a few RS4's around. I'm sure we can create our own meet?

When is good for everyone?
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads

dave_uk
Neutral
Posts: 31
Joined: Fri Feb 02, 2007 7:39 pm

Re: Anyone near Colchester area?

Post by dave_uk » Sun Jun 15, 2014 9:50 pm

Count me in, if you accept cabby's :bash:

DavidRS4
4th Gear
Posts: 663
Joined: Thu Jan 19, 2012 11:16 am
Location: Colchester

Re: Anyone near Colchester area?

Post by DavidRS4 » Mon Jun 16, 2014 8:01 am

dave_uk wrote:Count me in, if you accept cabby's :bash:
Even Cabby's lol
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads

brent007
Neutral
Posts: 24
Joined: Mon May 12, 2014 8:43 pm
Location: southend on sea

Re: Anyone near Colchester area?

Post by brent007 » Mon Jun 16, 2014 9:52 am

Im in southend, so id be up for a essex meet :)

scaghead
Top Gear
Posts: 1799
Joined: Sun Dec 21, 2008 7:52 pm
Location: essex

Re: Anyone near Colchester area?

Post by scaghead » Mon Jun 16, 2014 11:17 am

Maybe an essex meet is a possible then..southend would be a good place to meet IMO..plenty there,and always a laugh watching the numptys in there saxos..
R8 gen1 v10 plus white. Larini clubsport valved zorst.carbon side flicks,and fixed carbon spoiler.
Previous..RS4 Sprint blue loon..milltek non-res valved.revolution carbon air intake kit.cold air feed.carbon clean.MRC stage 2 remap..led interior lights.dectane led rear lights.led drls.Argon carbon oil splitter,race style front splitter,B and C door pillars and engine bottle cover..KW lowering springs.HEL brake lines all round.

DavidRS4
4th Gear
Posts: 663
Joined: Thu Jan 19, 2012 11:16 am
Location: Colchester

Re: Anyone near Colchester area?

Post by DavidRS4 » Mon Jun 16, 2014 11:25 am

scaghead wrote:Maybe an essex meet is a possible then..southend would be a good place to meet IMO..plenty there,and always a laugh watching the numptys in there saxos..
Southend isn't exactly central ;)
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads

brent007
Neutral
Posts: 24
Joined: Mon May 12, 2014 8:43 pm
Location: southend on sea

Re: Anyone near Colchester area?

Post by brent007 » Mon Jun 16, 2014 1:45 pm

southends great for me :rocker:

scaghead
Top Gear
Posts: 1799
Joined: Sun Dec 21, 2008 7:52 pm
Location: essex

Re: Anyone near Colchester area?

Post by scaghead » Mon Jun 16, 2014 6:56 pm

DavidRS4 wrote:
scaghead wrote:Maybe an essex meet is a possible then..southend would be a good place to meet IMO..plenty there,and always a laugh watching the numptys in there saxos..
Southend isn't exactly central ;)
Only a suggestion fella.. :? Where is central essex then? Somewhere like boreham maybe central but jack <beep> there..
R8 gen1 v10 plus white. Larini clubsport valved zorst.carbon side flicks,and fixed carbon spoiler.
Previous..RS4 Sprint blue loon..milltek non-res valved.revolution carbon air intake kit.cold air feed.carbon clean.MRC stage 2 remap..led interior lights.dectane led rear lights.led drls.Argon carbon oil splitter,race style front splitter,B and C door pillars and engine bottle cover..KW lowering springs.HEL brake lines all round.

DavidRS4
4th Gear
Posts: 663
Joined: Thu Jan 19, 2012 11:16 am
Location: Colchester

Re: Anyone near Colchester area?

Post by DavidRS4 » Mon Jun 16, 2014 8:16 pm

scaghead wrote:
DavidRS4 wrote:
scaghead wrote:Maybe an essex meet is a possible then..southend would be a good place to meet IMO..plenty there,and always a laugh watching the numptys in there saxos..
Southend isn't exactly central ;)
Only a suggestion fella.. :? Where is central essex then? Somewhere like boreham maybe central but jack <beep> there..
Somewhere that's central to all that want to meet up and that has a nice pub so we could have something to eat with a sizeable car park?
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: QuRace and 55 guests