interested on feedback on this prior to decision, i would love MRC map but cant justify the 760 mile round trip for it
APR map
-
DaytonaRs4
- 2nd Gear
- Posts: 245
- Joined: Fri Aug 09, 2013 10:42 pm
APR map
anybody out there running the APR map?..
interested on feedback on this prior to decision, i would love MRC map but cant justify the 760 mile round trip for it
interested on feedback on this prior to decision, i would love MRC map but cant justify the 760 mile round trip for it
2013 RS5 Phantom Black, MRC Stage 2 and TCU, Bilstein B16 IRC, 034 Arms, H&R ARB's, Milltek non res, ITG, 20” Ispiri FFR6 / PS4s, AP Radical 6 pot brakes / 390mm floaters, Pagid RSL1, JL Audio, EMtuning headlight build, Gtechniq ceramic and Llumar PPF
Gone: Daytona B7 RS4 saloon
Gone: Daytona B7 RS4 saloon
Re: APR map
I think the APR map is very generic (obviously).
The MRC maps are tuned to your car.
Also, last time I asked the APR maps didn’t have the cold cold-start-delete.
Be interested to hear what they’re offering now though.
The MRC maps are tuned to your car.
Also, last time I asked the APR maps didn’t have the cold cold-start-delete.
Be interested to hear what they’re offering now though.
VW Toe-rag V6 R-line.... no curry hooks...wtf ?
Gone: Avus Avant B7 RS4.... plus curry hooks !
Gone: Avus Avant B7 RS4.... plus curry hooks !
-
DaytonaRs4
- 2nd Gear
- Posts: 245
- Joined: Fri Aug 09, 2013 10:42 pm
Re: APR map
Timster wrote:I think the APR map is very generic (obviously).
The MRC maps are tuned to your car.
Also, last time I asked the APR maps didn’t have the cold cold-start-delete.
Be interested to hear what they’re offering now though.
Yeah my thoughts exactly, i know guys rave about apr maps on other vag's mostly turbo cars though...cant seem to find much feedback on the rs4 though...
Im considering going for a custom map from ecotune uk, that includes, full throttle 1-3 gears, SAI delete (after exhaust gets fitted) sport mode more agressive, vmax off....
2013 RS5 Phantom Black, MRC Stage 2 and TCU, Bilstein B16 IRC, 034 Arms, H&R ARB's, Milltek non res, ITG, 20” Ispiri FFR6 / PS4s, AP Radical 6 pot brakes / 390mm floaters, Pagid RSL1, JL Audio, EMtuning headlight build, Gtechniq ceramic and Llumar PPF
Gone: Daytona B7 RS4 saloon
Gone: Daytona B7 RS4 saloon
Re: APR map
MRC!
Gone but never forgotten:
2007 RS4 B7 Saloon, Metallic Silver with SS+.
LED's all round and Dectane LED tailights. KDS detail and paint. Lepsons black chrome, heavy on the silver wheels. JCWeldFab full system - valved and no pre-cats. MRC stage 2, de-flap and full carbon clean - 438PS and 489NM. HEL brake lines. H&R Spacers. Gtechniq C1 and EXO V2 coatings. 2010+ RNS-E. On the MRC dyno: http://youtu.be/y_k0VJ2--y8
2007 RS4 B7 Saloon, Metallic Silver with SS+.
LED's all round and Dectane LED tailights. KDS detail and paint. Lepsons black chrome, heavy on the silver wheels. JCWeldFab full system - valved and no pre-cats. MRC stage 2, de-flap and full carbon clean - 438PS and 489NM. HEL brake lines. H&R Spacers. Gtechniq C1 and EXO V2 coatings. 2010+ RNS-E. On the MRC dyno: http://youtu.be/y_k0VJ2--y8
-
DaytonaRs4
- 2nd Gear
- Posts: 245
- Joined: Fri Aug 09, 2013 10:42 pm
Re: APR map
I know i know. Lol
2013 RS5 Phantom Black, MRC Stage 2 and TCU, Bilstein B16 IRC, 034 Arms, H&R ARB's, Milltek non res, ITG, 20” Ispiri FFR6 / PS4s, AP Radical 6 pot brakes / 390mm floaters, Pagid RSL1, JL Audio, EMtuning headlight build, Gtechniq ceramic and Llumar PPF
Gone: Daytona B7 RS4 saloon
Gone: Daytona B7 RS4 saloon
Re: APR map
Mrc should be able to remote map the car I'd call and ask them
1*** hp TTE C6 rs6 saloon and the ultimate WB B5
Re: APR map
Getting home after won't take as long...
2013 Guards Red 991 Carrera - VERY MUCH Arrived.
2013 Ibis White RS4 B8 - Gone
2007 Phantom Black Avant RS4 B7 - Gone
2013 Ibis White RS4 B8 - Gone
2007 Phantom Black Avant RS4 B7 - Gone
Re: APR map
+1 for sure!Spectre wrote:Getting home after won't take as long...
MRC!
Gone but never forgotten:
2007 RS4 B7 Saloon, Metallic Silver with SS+.
LED's all round and Dectane LED tailights. KDS detail and paint. Lepsons black chrome, heavy on the silver wheels. JCWeldFab full system - valved and no pre-cats. MRC stage 2, de-flap and full carbon clean - 438PS and 489NM. HEL brake lines. H&R Spacers. Gtechniq C1 and EXO V2 coatings. 2010+ RNS-E. On the MRC dyno: http://youtu.be/y_k0VJ2--y8
2007 RS4 B7 Saloon, Metallic Silver with SS+.
LED's all round and Dectane LED tailights. KDS detail and paint. Lepsons black chrome, heavy on the silver wheels. JCWeldFab full system - valved and no pre-cats. MRC stage 2, de-flap and full carbon clean - 438PS and 489NM. HEL brake lines. H&R Spacers. Gtechniq C1 and EXO V2 coatings. 2010+ RNS-E. On the MRC dyno: http://youtu.be/y_k0VJ2--y8
Re: APR map
MRC
Just get a few bits done at once
For me it was....Dublin, Ferry, MRC for the day, Ferry Dublin... zero sleep and a few miles, but fook is it worth it!
Fair play to the lads for getting the work done in one day, guys are legends!
Just get a few bits done at once
For me it was....Dublin, Ferry, MRC for the day, Ferry Dublin... zero sleep and a few miles, but fook is it worth it!
Fair play to the lads for getting the work done in one day, guys are legends!
-
DaytonaRs4
- 2nd Gear
- Posts: 245
- Joined: Fri Aug 09, 2013 10:42 pm
Re: APR map
Called mrc earlier. Cant fit me in for around 3 weeks. Exhaust getting fitted next week
2013 RS5 Phantom Black, MRC Stage 2 and TCU, Bilstein B16 IRC, 034 Arms, H&R ARB's, Milltek non res, ITG, 20” Ispiri FFR6 / PS4s, AP Radical 6 pot brakes / 390mm floaters, Pagid RSL1, JL Audio, EMtuning headlight build, Gtechniq ceramic and Llumar PPF
Gone: Daytona B7 RS4 saloon
Gone: Daytona B7 RS4 saloon
Re: APR map
I tried APR and the tinming was too high & hence not good.
Doug remapped my car to perfection.
Doug remapped my car to perfection.
Last edited by Covkiller on Thu May 22, 2014 8:41 am, edited 1 time in total.
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs. Sold Sept 2019. Now rocking an F80 M3
Re: APR map
I had a 'quick' decoke and a stage2 done in a day at MRC - It was a VERY long day for me - mind you and I did have a sleep on the sofa in the waiting room. Banbury's a nice little town for a lunch time 1/2 and a ploughmans. I took the iPad as well and crammed a couple of movies in as well. You could always ask about getting your motor transported down to them.
I'll be going back to them later this year for a pre SPA Francorchamps visit [see the track days section] clutch/flywheel/brake service - but I'll leave it with them this time and wont be catching any flies on the sofa!
I'll be going back to them later this year for a pre SPA Francorchamps visit [see the track days section] clutch/flywheel/brake service - but I'll leave it with them this time and wont be catching any flies on the sofa!
Re: APR map
Remote mapping will only work AFTER you send them the CPU for the first setup... after that, they can remote map.
Re: APR map
DaytonaRs4 wrote:anybody out there running the APR map?..
interested on feedback on this prior to decision, i would love MRC map but cant justify the 760 mile round trip for it
The APR RS4 tune doesn't have much of a history. Never have we seen any performance testing done.
Owners have recently dyno'd a few B7 RS4s on a dyno in California at 034 motorsports, all the same week so the data is reasonable for comparison. 2 of whom had an APR tune, the other was stock tune. One did stock vs APR same day.
The results were pretty terrible for APR frankly. All dyno numbers at the wheels (net of losses...no rundown or calculation)
Car 1 - BenSTI, freshly carbon cleaned
full ebwerks catless exhaust STOCK tune - 328 WHP
full ebwerks catless exhaust APR tune - 325 WHP
tune delta = -3 WHP . Yikes.
Car 2 - meem, freshly carbon cleaned
stock downpipes with cats, AWE catback exhaust, APR tune - 327 WHP
interesting to note that the ebwerks downpipes + catback did absolutely nothing vs. stock downpipes and the AWE catback. We have analysed this recently in a thread on audirevolution and found similar (lacking) results with ebwerks and their exhaust systems in performance testing.
Car 3 - RS4max - freshly carbon cleaned
stock downpipes with cats, AWE catback exhaust, STOCK tune - 328 WHP
Comparing meem to RS4max, it's not looking so good for APR on the RS4. They had the same mods, and there was no difference between stock tune and APR tune.
Bottom line? If you would love to get MRC, they have lots of satisfied customers.
If you're not able to justify the trip, and want a solution that doesn't require the dyno, and happens to have produced all of the highest dyno numbers and fastest acceleration tests, have a look at the JHM tune. You can flash your own car remotely with their cable. A few users here have the tune and can share their thoughts. We've (in RS4 owners in north america) tested every single tune out there from custom dyno tunes to the big company off the shelf tunes like APR/GIAC and whenever the cars are compared head to head, JHM cars come out on top in every race. It's pretty compelling.
Last edited by sakimano on Fri May 23, 2014 4:54 pm, edited 1 time in total.
Re: APR map
DaytonaRs4 wrote:Called mrc earlier. Cant fit me in for around 3 weeks. Exhaust getting fitted next week
Just be patient and get MRC if that's what you want.
No need to rush the decision as it's not going to be earth shattering getting a remap done...nor is it like you won't be able to enjoy it for years. If you rush into something else you will ultimately regret it and go another direction. As with buying tools, buy it nice, or buy it twice.
Who is online
Users browsing this forum: Google Adsense [Bot] and 314 guests