ILLUMINATED GEARKNOB AVAILABLE
ILLUMINATED GEARKNOB AVAILABLE
Have found a company offering illuminated gearknob for our B5 S4.
Of course it's in the USA!
Available in Red or Blue illumination 6-speed, leather. $80
Check out Riegertec.com
Similar to BMW "M" cars
I Have ordered one no problem off their website.
Link http://www.riegeretc.com/catalog/produc ... ucts_id=99
Of course it's in the USA!
Available in Red or Blue illumination 6-speed, leather. $80
Check out Riegertec.com
Similar to BMW "M" cars
I Have ordered one no problem off their website.
Link http://www.riegeretc.com/catalog/produc ... ucts_id=99
Here's a pic of a six speeder
Here's a pic of a 6 speed knob fitted in a VW
- Attachments
-
- DSCN3189_Installed_Lighted_Dark.jpg (10.54 KiB) Viewed 1092 times
-
RobTheHungryMonkey
- Neutral
- Posts: 44
- Joined: Thu Sep 09, 2004 11:58 am
Looks good, lets us know when it arrives, piccies etc....feel a credit card bashing coming on.
99 Ming Saloon, Tanoga S/S, De-cat APR D/Ps, Miltek catback, Forge DVs, RS4 suspension, K04s, I/Cs, MAF, Clutch, injectors, oil cooler, airbox, Y pipe, spark plugs, front brakes, Vast EFK, Walbro fuel pump, MRC custom tune, 18" B7 RS4 reps, Kumho tyres
Gearknob arrived OK, only 5 days, came in the post.
Easy to order and professional. They sent it as a "Gift" so as not to attract any Customs Tax which was helpful.
Total was $97-95 ($80 + $17-95 p+p) used Paypal..... Easy!
Good exchange rate these days.
Have kept it as a Christmas present to me from my wife, so not fitted it as yet.
Easy to order and professional. They sent it as a "Gift" so as not to attract any Customs Tax which was helpful.
Total was $97-95 ($80 + $17-95 p+p) used Paypal..... Easy!
Good exchange rate these days.
Have kept it as a Christmas present to me from my wife, so not fitted it as yet.
-
tartan_rob
- Cruising
- Posts: 2990
- Joined: Thu Sep 04, 2003 1:45 pm
- Location: Swindon, Wilts
My knob came yesterday
....so did the one for the car...
Fitting took about 20 mins as I have done the wiring in advance. No big deal and can now sell the original + gaitor on ebay. One thing I would say is that the new knob is smaller and the same shape as the 3 series. I got used to the shape of the Audi knob and preferred the size...ho hum.
Fitting took about 20 mins as I have done the wiring in advance. No big deal and can now sell the original + gaitor on ebay. One thing I would say is that the new knob is smaller and the same shape as the 3 series. I got used to the shape of the Audi knob and preferred the size...ho hum.
2017 Kawasaki Z1000
2014 RS6
2014 S1
2014 RS6
2014 S1
- SimonS4MTM
- Top Gear
- Posts: 2314
- Joined: Thu May 29, 2003 2:40 pm
- Location: Norfolk
- Contact:
-
tartan_rob
- Cruising
- Posts: 2990
- Joined: Thu Sep 04, 2003 1:45 pm
- Location: Swindon, Wilts
Fitted gearknob
Have now successfully fitted the gearknob. It's a good quality item and fits in perfectly with my car's interior. I actually prefer the smaller "ergonomically shaped" [ BMW ] knob supplied. I found the large, round, bulbous, standard one rather clumsy and I am very pleased with the new one and recommend it . I have wired mine to come on with the ignition same as the dash lights and my Boost gauge.
The red lighting is a good match and the leather gaitor and leather knob are quality made and stitched. The standard knob and gaitor can be retained for putting back if required, no modifications are made to the standard threaded gearstick shaft. It's a straightforward and easy job to do. The new knob has a chrome ring on it as does the top collar of the gaitor - these actually look fine with the chrome "Audi" rings on the steering wheel and the chrome door release levers.
At night the dark space below the radio now has a subtle gear-pattern to highlight the position of the gearstick and helps me find reverse (left and up) which I can sometimes forget as I drive other cars on a daily basis (right and down).
The red lighting is a good match and the leather gaitor and leather knob are quality made and stitched. The standard knob and gaitor can be retained for putting back if required, no modifications are made to the standard threaded gearstick shaft. It's a straightforward and easy job to do. The new knob has a chrome ring on it as does the top collar of the gaitor - these actually look fine with the chrome "Audi" rings on the steering wheel and the chrome door release levers.
At night the dark space below the radio now has a subtle gear-pattern to highlight the position of the gearstick and helps me find reverse (left and up) which I can sometimes forget as I drive other cars on a daily basis (right and down).
RE: Fitted gearknob
how about some pic's!!!
I did a TT knob in my 2.8 but this looks quite cool to.

If you cant load them up send them to me and I will sort it out.
I did a TT knob in my 2.8 but this looks quite cool to.

If you cant load them up send them to me and I will sort it out.
Who is online
Users browsing this forum: No registered users and 70 guests