"shiny"
Now let the fun begin!!!
-
Weiß-sechs
- 5th Gear
- Posts: 1220
- Joined: Wed Nov 20, 2013 3:49 pm
- Location: Everywhere & nowhere baby, that's where I'm at...
Re: Now let the fun begin!!!
Oh yes, I'm following very closely the 517 'box saga, waiting not so patiently for full write up/details
"shiny"
"shiny"
Re: Now let the fun begin!!!
Weiß-sechs wrote:Oh yes, I'm following very closely the 517 'box saga, waiting not so patiently for full write up/details
"shiny"
Won't happen till I get her back and then do said 1000 miles run in with no WOT
950 nm torque!
Ohh running bridgestones because they are the best
Ohh running bridgestones because they are the best
-
Weiß-sechs
- 5th Gear
- Posts: 1220
- Joined: Wed Nov 20, 2013 3:49 pm
- Location: Everywhere & nowhere baby, that's where I'm at...
Re: Now let the fun begin!!!
Road trip over Christmas, soon rack up 1000 miles, full write up January 2nd 
Re: Now let the fun begin!!!
No will do the boring way.......13 days of using to go to work, aghhhhhhhhhhhhhhhhhhh jan 2nd it is 
950 nm torque!
Ohh running bridgestones because they are the best
Ohh running bridgestones because they are the best
Re: Now let the fun begin!!!
Panda you cant do 1000 miles without WOT !
Saw the 517 on box, but why does it also say 'Made In China' ?, or is it my eyes going bad ?
Saw the 517 on box, but why does it also say 'Made In China' ?, or is it my eyes going bad ?
Re: Now let the fun begin!!!
Been down again to see her and gearbox is in leaving just everything to connect up. Driveshaft has landed as well so it looks like (fingers crossed) she might be ready for collection tomorrow 
950 nm torque!
Ohh running bridgestones because they are the best
Ohh running bridgestones because they are the best
Re: Now let the fun begin!!!
Looks like your flexible thingy on the downpipe might be deteriorating a bit. Possibly scraped on something. Mine's the same.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
-
gingertoss
- 3rd Gear
- Posts: 355
- Joined: Wed Aug 31, 2005 12:38 pm
- Location: Glasgow
Re: Now let the fun begin!!!
Replaced both flexi's on mine last year. Got them off Jetex as Miltek wanted fortunes for them.
2003 RS6 Avant, non res Miltek, 3" catless dps, wagners, MRC air filters, 044 fuel pump, MRC custom remap, TCU remap, 566ps, 812nm, pss9 coilovers, hotchkis rollbars, Recaro CSs, 390mm front discs, hi-spec 4 pot rear calipers.
Re: Now let the fun begin!!!
How much were they and what are they called?gingertoss wrote:Replaced both flexi's on mine last year. Got them off Jetex as Miltek wanted fortunes for them.
950 nm torque!
Ohh running bridgestones because they are the best
Ohh running bridgestones because they are the best
Re: Now let the fun begin!!!
Also, will they fit the standard DP? Are yours the Miltek DP?
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
Re: Now let the fun begin!!!
Panda's are Miltek race DPs, no? Another mod list mystery solved, perhaps?
No matter where you go, there you are.
Re: Now let the fun begin!!!
Your eye sight is too good for an upside down sheep lover!!!bam_bam wrote:Panda's are Miltek race DPs, no? Another mod list mystery solved, perhaps?
950 nm torque!
Ohh running bridgestones because they are the best
Ohh running bridgestones because they are the best
Re: Now let the fun begin!!!
The little plates welded to the down pipes gives it away. They have "NOT FOR ROAD USE" stamped on them. You need to remove them or get them changed to "FOR ROAD USE"
Avus Avant, RNS-E mk2 with sds and Bluetooth, Milltek, Hotchkis, Bilstein, Forge, ITG, A.C.E, Wagner, FBMFSW, MTM.
Re: Now let the fun begin!!!
bilko1 wrote:The little plates welded to the down pipes gives it away. They have "NOT FOR ROAD USE" stamped on them. You need to remove them or get them changed to "FOR ROAD USE"
Hahaha after 4 yrs use I thought they might have rusted away!!!
950 nm torque!
Ohh running bridgestones because they are the best
Ohh running bridgestones because they are the best
Re: Now let the fun begin!!!
You're not really down with how stainless steal works, huh?amanda1 wrote:bilko1 wrote:The little plates welded to the down pipes gives it away. They have "NOT FOR ROAD USE" stamped on them. You need to remove them or get them changed to "FOR ROAD USE"
Hahaha after 4 yrs use I thought they might have rusted away!!!
No matter where you go, there you are.
Who is online
Users browsing this forum: No registered users and 191 guests