What are you doing this weekend...?

4.2 V8 40v biturbo - 450 bhp
4.2 V8 40v biturbo - 480 bhp (plus)
Post Reply
R8GXR
2nd Gear
Posts: 225
Joined: Wed Jul 18, 2012 12:56 pm
Location: Hampshire

What are you doing this weekend...?

Post by R8GXR » Fri Aug 23, 2013 8:25 pm

We are off to a wine festival in Cochem in Germany and then in between the wine its popping up to the Nurburgring for a few laps. :beerchug:
Staying at the ring casino hotel Monday night (treating the missis!) then back home Tuesday via Reims pits for a few photos.
Apart from the gearbox (which seems ok and has been fully serviced!) ive replaced or fixed just about everything on and in the car so hopefully all will work well.
Attachments
image.jpg
All nice and shiney!
image.jpg
Bet these wont be so clean by the time we return.
image.jpg
Hopefully these will work well on the way and round the track.
Top
User avatar
RS6JJL
3rd Gear
Posts: 314
Joined: Tue Feb 14, 2012 10:54 pm

Re: What are you doing this weekend...?

Post by RS6JJL » Thu Aug 29, 2013 10:57 pm

how was the trip? just seen this advertised on piston heads!
KV53 YML - RS6 Avant - Stolen Hampshire
RS 51X CS - RS6 Avant - Sold
Top
greyingfast
Neutral
Posts: 49
Joined: Wed Aug 14, 2013 8:47 pm

Re: What are you doing this weekend...?

Post by greyingfast » Thu Aug 29, 2013 11:48 pm

Im off to a Vimto tasting, couple of roundabouts close by, so ring action will be rife!

Staying at my house, but the missus is booking into a Premier Inn, everything's premier but the price, she cant wait. Once I've picked her up in the morning, we're planning to go home via B&Q and Lidl for some sh#t we don't need.

I've removed the 623 sweet wrappers my kids left in it, and peeled the jelly baby off the head rest, so weight is down.

Just jealous sorry ;-)
Top
User avatar
Shoppinit
Cruising
Posts: 20315
Joined: Wed Dec 31, 2008 6:24 pm

Re: What are you doing this weekend...?

Post by Shoppinit » Fri Aug 30, 2013 9:03 am

greyingfast wrote:so ring action will be rife!
You are reinforcing stereotypes about cornholerswallers.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
Top
greyingfast
Neutral
Posts: 49
Joined: Wed Aug 14, 2013 8:47 pm

Re: What are you doing this weekend...?

Post by greyingfast » Fri Aug 30, 2013 9:42 am

Shoppinit wrote:
greyingfast wrote:so ring action will be rife!
You are reinforcing stereotypes about cornholerswallers.
CORNWALL is not in Devon, its the third world bit hanging off our coat tails :bigblink:
Top
User avatar
Nobby
Top Gear
Posts: 1981
Joined: Wed Dec 14, 2011 3:31 pm
Location: Oxon

Re: What are you doing this weekend...?

Post by Nobby » Fri Aug 30, 2013 11:38 am

I'm doing my cambelt & IC 'JB weld-athon' this weekend. Should be fun, especially as I can barely bend my knee after my operation.
Daytona RS6 Avant
Rule #36 - At least one gear shall be dropped for every tunnel travelled

** NOW AVAILABLE ** C5 RS6 Cambelt Tool kit rental (also fits other models 3.7/4.2 V8 engines)
Top
User avatar
Mr Footlong
Cruising
Posts: 4331
Joined: Thu Nov 10, 2011 12:07 pm

Re: What are you doing this weekend...?

Post by Mr Footlong » Fri Aug 30, 2013 8:30 pm

Nobbers, were you not told about CPM machines? Total lifesaver for post-knee ops, be it knee replacement or other things. I swear by them, my dad had both knees replaces at once and is perfect after using one of these from day one and I have a few other people I recommended them to that have recovered amazingly.

We rent ours from Phoenix healthcare - http://www.phoenix-healthcare.co.uk/content/1/cpm-hire

May be of no use to you but there you go. I have two shot-to-sh!t knees so can relate.
Current:

23' C8 RS6 Vorsprung - 23' RS E-Tron GT Carbon Vorsprung

Gone:

"Brutus"- C5 RS6 Avant - MRC stage 2 - Milltek non-res + 100 cell cats - Wagner ICs - PSS9 - H&R ARBs - OZ Superturismo LM - C6 Custom brakes - HD RNS-E - Various other bits - 555PS/832Nm
"Taz"- C7 RS6 - MRC stage 2 745PS/1095Nm
12' Cayenne Turbo, B7 RS4, S3, Cupra R, XJR, EVO VII, STI8,5,2&WRX, 106 GTI&XSI, other crap.
Top
User avatar
Nobby
Top Gear
Posts: 1981
Joined: Wed Dec 14, 2011 3:31 pm
Location: Oxon

Re: What are you doing this weekend...?

Post by Nobby » Fri Aug 30, 2013 9:09 pm

Thanks Footers. I did know about them but was dissuaded by the docs and never thought any more of it. I've actually torn my hamstring right were the graft was taken out so that accounted for most of the tightness. Hey ho. You live and learn.

First problem encountered tonight with my cambelt change. One MAf seal looks like its been pinched so I'll need a couple more. Do Audi have them in stock of do you recon I'm better off going to MRC tomorrow?
Daytona RS6 Avant
Rule #36 - At least one gear shall be dropped for every tunnel travelled

** NOW AVAILABLE ** C5 RS6 Cambelt Tool kit rental (also fits other models 3.7/4.2 V8 engines)
Top
User avatar
Mr Footlong
Cruising
Posts: 4331
Joined: Thu Nov 10, 2011 12:07 pm

Re: What are you doing this weekend...?

Post by Mr Footlong » Fri Aug 30, 2013 9:21 pm

CPM machines simply haven't been adopted over here yet, they are used heavily in Yankland. A lot of physios here don't like them as in all honesty the machines are doing a much better job than they are with knee recovery. However, your doc may have had a valid reason, who knows.

Can't tell you either way regarding the seals but interested to hear where you get them from and the part numbers as I have been thinking about changing them and the seals within the inlets too.
Current:

23' C8 RS6 Vorsprung - 23' RS E-Tron GT Carbon Vorsprung

Gone:

"Brutus"- C5 RS6 Avant - MRC stage 2 - Milltek non-res + 100 cell cats - Wagner ICs - PSS9 - H&R ARBs - OZ Superturismo LM - C6 Custom brakes - HD RNS-E - Various other bits - 555PS/832Nm
"Taz"- C7 RS6 - MRC stage 2 745PS/1095Nm
12' Cayenne Turbo, B7 RS4, S3, Cupra R, XJR, EVO VII, STI8,5,2&WRX, 106 GTI&XSI, other crap.
Top
User avatar
Nobby
Top Gear
Posts: 1981
Joined: Wed Dec 14, 2011 3:31 pm
Location: Oxon

Re: What are you doing this weekend...?

Post by Nobby » Fri Aug 30, 2013 9:56 pm

Just having a look for the seals online. You wouldn't believe how much they cost. Go on, have a guess. Part number is 077133428A by the way

Found an ETKA that works - its helps if you speak Russian.

http://vin-online.ru/etka.php?vag=AU&rg ... 0&gr=13310
Daytona RS6 Avant
Rule #36 - At least one gear shall be dropped for every tunnel travelled

** NOW AVAILABLE ** C5 RS6 Cambelt Tool kit rental (also fits other models 3.7/4.2 V8 engines)
Top
User avatar
mavada
Cruising
Posts: 3270
Joined: Thu Nov 11, 2010 1:19 pm
Location: The Neanderthal land

Re: What are you doing this weekend...?

Post by mavada » Fri Aug 30, 2013 9:59 pm

http://ifinterface.com/page/page3.php?langid=1
If you can't go to the track, bring the track to you.
Mugello Blue C5 RS6 Avant
Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Yellow Koni's
Porsche 959, gone but not forgotten.
Fight ALS disease https://www.youtube.com/watch?v=wGFDWTC8B8g
Top
User avatar
Nobby
Top Gear
Posts: 1981
Joined: Wed Dec 14, 2011 3:31 pm
Location: Oxon

Re: What are you doing this weekend...?

Post by Nobby » Fri Aug 30, 2013 10:07 pm

*Bookmarked

Cheers Mav
Daytona RS6 Avant
Rule #36 - At least one gear shall be dropped for every tunnel travelled

** NOW AVAILABLE ** C5 RS6 Cambelt Tool kit rental (also fits other models 3.7/4.2 V8 engines)
Top
User avatar
mavada
Cruising
Posts: 3270
Joined: Thu Nov 11, 2010 1:19 pm
Location: The Neanderthal land

Re: What are you doing this weekend...?

Post by mavada » Fri Aug 30, 2013 10:09 pm

Nobby wrote:*Bookmarked

Cheers Mav
:thumbs:
If you can't go to the track, bring the track to you.
Mugello Blue C5 RS6 Avant
Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Yellow Koni's
Porsche 959, gone but not forgotten.
Fight ALS disease https://www.youtube.com/watch?v=wGFDWTC8B8g
Top
User avatar
Nobby
Top Gear
Posts: 1981
Joined: Wed Dec 14, 2011 3:31 pm
Location: Oxon

Re: What are you doing this weekend...?

Post by Nobby » Sat Aug 31, 2013 10:17 am

Just ordered some from Audi. £28 each.
Daytona RS6 Avant
Rule #36 - At least one gear shall be dropped for every tunnel travelled

** NOW AVAILABLE ** C5 RS6 Cambelt Tool kit rental (also fits other models 3.7/4.2 V8 engines)
Top
User avatar
Shoppinit
Cruising
Posts: 20315
Joined: Wed Dec 31, 2008 6:24 pm

Re: What are you doing this weekend...?

Post by Shoppinit » Sat Aug 31, 2013 10:32 am

Bonkers.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
Top
Post Reply

Return to “RS6 / RS6 plus (C5 Typ 4B) 2002-2004”

Who is online

Users browsing this forum: Google [Bot], Google Adsense [Bot], Majestic-12 [Bot] and 85 guests