driveby vid

4.2 V8 32v Naturally Aspirated - 414 bhp
Post Reply
User avatar
toyneg
5th Gear
Posts: 1351
Joined: Mon Aug 20, 2012 2:26 pm
Location: Hampshire

driveby vid

Post by toyneg » Fri Aug 23, 2013 9:56 pm

just a really short clip but if anyone wants to know what their car with a standard exhaust sounds like from the outside - here you go! I know what's next on my list :boots:

http://www.youtube.com/watch?v=qLMc0_My ... e=youtu.be
Glacier White 2017 S3 Saloon with all the Tech.
Gone but not forgotten - B7 RS4 Saloon Black - H&R spacers, Tints, Gun Metal Alloys, MRC Stage 2, Pre Cats, Milltek Non Res, K/W Springs, MRC Full Carbon clean - 431ps
previous - B6 A4 1.8T S-Line 215PS

jaysrs4
5th Gear
Posts: 1116
Joined: Sat Jan 28, 2012 11:23 pm

Re: driveby vid

Post by jaysrs4 » Sat Aug 24, 2013 11:08 am

Damn I so need a non rez Milly in my life. That's just not brutal enough! Still I'll take that for now, its only been a few months :wink:
Image

User avatar
toyneg
5th Gear
Posts: 1351
Joined: Mon Aug 20, 2012 2:26 pm
Location: Hampshire

Re: driveby vid

Post by toyneg » Sat Aug 24, 2013 5:19 pm

jaysrs4 wrote:Damn I so need a non rez Milly in my life. That's just not brutal enough! Still I'll take that for now, its only been a few months :wink:
that's what I was thinking, that was until I heard Gaz's Tubi today haha
Glacier White 2017 S3 Saloon with all the Tech.
Gone but not forgotten - B7 RS4 Saloon Black - H&R spacers, Tints, Gun Metal Alloys, MRC Stage 2, Pre Cats, Milltek Non Res, K/W Springs, MRC Full Carbon clean - 431ps
previous - B6 A4 1.8T S-Line 215PS

adsgreen
Cruising
Posts: 5571
Joined: Mon Aug 16, 2010 9:54 am

Re: driveby vid

Post by adsgreen » Sat Aug 24, 2013 5:40 pm

Ironicly a non res miltek would probably fail the strict goodwood noise limits ;) mine was tested at 98db

jaysrs4
5th Gear
Posts: 1116
Joined: Sat Jan 28, 2012 11:23 pm

Re: driveby vid

Post by jaysrs4 » Sat Aug 24, 2013 5:55 pm

toyneg wrote:
jaysrs4 wrote:Damn I so need a non rez Milly in my life. That's just not brutal enough! Still I'll take that for now, its only been a few months :wink:
that's what I was thinking, that was until I heard Gaz's Tubi today haha
Me too but 3k is rather excessive. If I had 3 grand lying about for an exhaust I don't think is be driving an RS4!
Image

User avatar
toyneg
5th Gear
Posts: 1351
Joined: Mon Aug 20, 2012 2:26 pm
Location: Hampshire

Re: driveby vid

Post by toyneg » Sat Aug 24, 2013 6:46 pm

adsgreen wrote:Ironicly a non res miltek would probably fail the strict goodwood noise limits ;) mine was tested at 98db
That's really useful Ads as I had asked if anyone with that exhaust had been noise tested in the trackday section. I think goodwood may have up'd their limit though as it was 105db max on wed?
Glacier White 2017 S3 Saloon with all the Tech.
Gone but not forgotten - B7 RS4 Saloon Black - H&R spacers, Tints, Gun Metal Alloys, MRC Stage 2, Pre Cats, Milltek Non Res, K/W Springs, MRC Full Carbon clean - 431ps
previous - B6 A4 1.8T S-Line 215PS

User avatar
toyneg
5th Gear
Posts: 1351
Joined: Mon Aug 20, 2012 2:26 pm
Location: Hampshire

Re: driveby vid

Post by toyneg » Sat Aug 24, 2013 6:47 pm

jaysrs4 wrote:
toyneg wrote:
jaysrs4 wrote:Damn I so need a non rez Milly in my life. That's just not brutal enough! Still I'll take that for now, its only been a few months :wink:
that's what I was thinking, that was until I heard Gaz's Tubi today haha
Me too but 3k is rather excessive. If I had 3 grand lying about for an exhaust I don't think is be driving an RS4!
Haha true, yeah I def don't have that available unfortunately. The milly does sound good anyway
Glacier White 2017 S3 Saloon with all the Tech.
Gone but not forgotten - B7 RS4 Saloon Black - H&R spacers, Tints, Gun Metal Alloys, MRC Stage 2, Pre Cats, Milltek Non Res, K/W Springs, MRC Full Carbon clean - 431ps
previous - B6 A4 1.8T S-Line 215PS

User avatar
bete noir
Neutral
Posts: 17
Joined: Sat May 18, 2013 5:15 pm

Re: driveby vid

Post by bete noir » Sun Aug 25, 2013 10:22 am

toyneg wrote:
adsgreen wrote:Ironicly a non res miltek would probably fail the strict goodwood noise limits ;) mine was tested at 98db
That's really useful Ads as I had asked if anyone with that exhaust had been noise tested in the trackday section. I think goodwood may have up'd their limit though as it was 105db max on wed?
Goodwood run a few 105dB days, but they allow a smaller number of cars on track at one time on those days. Most track days there still have the 98dB limit.
ImageOn the Ball City

User avatar
toyneg
5th Gear
Posts: 1351
Joined: Mon Aug 20, 2012 2:26 pm
Location: Hampshire

Re: driveby vid

Post by toyneg » Sun Aug 25, 2013 2:07 pm

bete noir wrote:
toyneg wrote:
adsgreen wrote:Ironicly a non res miltek would probably fail the strict goodwood noise limits ;) mine was tested at 98db
That's really useful Ads as I had asked if anyone with that exhaust had been noise tested in the trackday section. I think goodwood may have up'd their limit though as it was 105db max on wed?
Goodwood run a few 105dB days, but they allow a smaller number of cars on track at one time on those days. Most track days there still have the 98dB limit.
Ah cool, that makes sense, they let 6 cars on at a time when I was there.
Glacier White 2017 S3 Saloon with all the Tech.
Gone but not forgotten - B7 RS4 Saloon Black - H&R spacers, Tints, Gun Metal Alloys, MRC Stage 2, Pre Cats, Milltek Non Res, K/W Springs, MRC Full Carbon clean - 431ps
previous - B6 A4 1.8T S-Line 215PS

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: AndyBrad, Google [Bot] and 110 guests