Dents in roof.

4.2 V8 40v biturbo - 450 bhp
4.2 V8 40v biturbo - 480 bhp (plus)
Post Reply
User avatar
mavada
Cruising
Posts: 3270
Joined: Thu Nov 11, 2010 1:19 pm
Location: The Neanderthal land

Dents in roof.

Post by mavada » Thu Jan 03, 2013 2:04 pm

Just noticed ive got some slight dents in my roof. some human/alien/animal decided to walk over my roof. the dent(s) are spread over a wide area.
i know the metal is very thin (remember its easy to get it moving when washing it...). i hope it can be repaired without replacing the whole roof...
Anyone heard of a roof replacement before? i know its available in ETKA but lets hope it can be sorted without replacement. it didnt left scratches, weird... :(

Will shoot a video of it cos on pic it isnt that good visible.
If you can't go to the track, bring the track to you.
Mugello Blue C5 RS6 Avant
Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Yellow Koni's
Porsche 959, gone but not forgotten.
Fight ALS disease https://www.youtube.com/watch?v=wGFDWTC8B8g
Top
swannny
5th Gear
Posts: 1057
Joined: Thu Dec 29, 2011 7:15 pm
Location: cambridge

Re: Dents in roof.

Post by swannny » Thu Jan 03, 2013 2:15 pm

My friend had this on his BMW bonnet and roof, loads of little dings which were only visible when looking down the paint. Turned out a hailstorm caused it!
I used to own a 6, now I'm just a lurker!
Top
User avatar
mavada
Cruising
Posts: 3270
Joined: Thu Nov 11, 2010 1:19 pm
Location: The Neanderthal land

Re: Dents in roof.

Post by mavada » Thu Jan 03, 2013 2:20 pm

its iphone quality, but here it is...its from middle right towards the front...
http://www.youtube.com/watch?v=NUD3gXUK ... e=youtu.be
If you can't go to the track, bring the track to you.
Mugello Blue C5 RS6 Avant
Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Yellow Koni's
Porsche 959, gone but not forgotten.
Fight ALS disease https://www.youtube.com/watch?v=wGFDWTC8B8g
Top
User avatar
Shoppinit
Cruising
Posts: 20315
Joined: Wed Dec 31, 2008 6:24 pm

Re: Dents in roof.

Post by Shoppinit » Thu Jan 03, 2013 8:08 pm

Paintless dent removal. Will be easy on the roof. Had some dents removed on mine recently. You can't tell it was ever dented afterwards.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
Top
User avatar
chunky79
Cruising
Posts: 11517
Joined: Sun Feb 25, 2007 11:51 am
Location: West Mids

Re: Dents in roof.

Post by chunky79 » Thu Jan 03, 2013 8:15 pm

What Shopp says, drop the roof lining to save some cash too.
previous- Pug 205 gti, 306 gti, 309 gti Goodwood.
Audi S3, S4 V8 avant.
Porsche Macan Turbo.
Gone but NEVER forgotten - C5 RS6 Misano red avant.

Now - Empty garage

If you don't know where you're going, any road will take you there!
Top
User avatar
mavada
Cruising
Posts: 3270
Joined: Thu Nov 11, 2010 1:19 pm
Location: The Neanderthal land

Re: Dents in roof.

Post by mavada » Thu Jan 03, 2013 8:36 pm

what worries me is that the roof is so flexible (thin) it wont find its Original shape...
just found out my bonnet has the same... :evil:
If you can't go to the track, bring the track to you.
Mugello Blue C5 RS6 Avant
Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Yellow Koni's
Porsche 959, gone but not forgotten.
Fight ALS disease https://www.youtube.com/watch?v=wGFDWTC8B8g
Top
User avatar
Shoppinit
Cruising
Posts: 20315
Joined: Wed Dec 31, 2008 6:24 pm

Re: Dents in roof.

Post by Shoppinit » Thu Jan 03, 2013 9:02 pm

It'll be fine. It's magic.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
Top
User avatar
mavada
Cruising
Posts: 3270
Joined: Thu Nov 11, 2010 1:19 pm
Location: The Neanderthal land

Re: Dents in roof.

Post by mavada » Thu Jan 03, 2013 9:06 pm

Thanks :thumbs:
If you can't go to the track, bring the track to you.
Mugello Blue C5 RS6 Avant
Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Yellow Koni's
Porsche 959, gone but not forgotten.
Fight ALS disease https://www.youtube.com/watch?v=wGFDWTC8B8g
Top
swannny
5th Gear
Posts: 1057
Joined: Thu Dec 29, 2011 7:15 pm
Location: cambridge

Re: Dents in roof.

Post by swannny » Thu Jan 03, 2013 9:07 pm

It is good, I had my passenger door done, and you'd never know. I know it is a thicker grade of metal compared to the roof skin, but it is worth a try.

And as chunk said, if you remove the roof liner yourself that will save a few pennies too. Plus you know it's been out back correctly!
I used to own a 6, now I'm just a lurker!
Top
Hedgehog Dodger
2nd Gear
Posts: 214
Joined: Sat Oct 22, 2011 11:30 am
Location: Cheshire

Re: Dents in roof.

Post by Hedgehog Dodger » Thu Jan 03, 2013 10:41 pm

Were you on a boat while shooting that vid? :bigblink: :biggrin3:
I love drag racing and track racing. I have had many fast cars and below is a short list of the ones most memorable.

MR2 Turbo REV2 (standard) > MR2 Turbo REV1 300HP> MR2 Turbo REV3 450HP (Nick Name Biscuit tin) > Celica GT4 ST205 WRC 300HP > R32 GTR 425HP > Honda Integra DC2 (standard) > EVO GSR 300HP > R32 GTR 450HP

Now on the hunt for an RS6
Top
User avatar
Shoppinit
Cruising
Posts: 20315
Joined: Wed Dec 31, 2008 6:24 pm

Re: Dents in roof.

Post by Shoppinit » Fri Jan 04, 2013 12:51 pm

For most of the work on mine, the bloke didn't have to take any trim off. True, it's easier to push a dent out than pull it, but I would be very wary about the rooflining going back in exactly the right place. Seen too many cars with creases and ill-fitting roof lining to want to take mine off;

Here's a pic of him doing my car, pulling the dents out:

Image
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
Top
User avatar
el_ringo
5th Gear
Posts: 1482
Joined: Thu Feb 15, 2007 9:45 pm
Location: Now in W Yorks

Re: Dents in roof.

Post by el_ringo » Sat Jan 05, 2013 10:41 am

I saw one place about my dents and they can stick stuiff and tug it out. That only tends to work for more shallow dents. Mine will need a respray though to get them perfect.
Daytona Grey (C5) RS6 saloon, but just a little better...

**** SOLD!!! :( ****

KW V3 suspension
390mm C6 Brakes
Hotchkis ARBs
Viper Tuning (537bhp 604lbft)
Unit 20 TCU remap
Milltek non-res exhaust and downpipes
100 cell sport cats
Aero wipers
Winter wheels
Wagner intercoolers
LED interior lights

Tesla Model S 85D
All the options with the exception of stupid air suspension

Tesla Model X 60D
Silly doors and all!
Top
Post Reply

Return to “RS6 / RS6 plus (C5 Typ 4B) 2002-2004”

Who is online

Users browsing this forum: Google [Bot], Google Adsense [Bot], Majestic-12 [Bot] and 88 guests