How to change rear high level brake lights ?

2.7 V6 30v biturbo - 251bhp
2.7 V6 30v biturbo - 261bhp
Post Reply
User avatar
S4 OXON
1st Gear
Posts: 53
Joined: Fri Jan 23, 2004 9:16 pm

How to change rear high level brake lights ?

Post by S4 OXON » Sat Aug 14, 2004 7:47 am

what's the best way of getting at the rear high level lights i will do it my self but do not want to rip any trim And can i get the lamps in hallfords and what type are thay before pulling it apart and not getting back together

TarmacTerrorist
5th Gear
Posts: 1283
Joined: Wed Jul 09, 2003 6:26 pm
Location: disappeared up own backside
Contact:

Post by TarmacTerrorist » Sat Aug 14, 2004 8:27 am

Think Tompson has been down this route with the high level brake light, sure he will be around soon.
Too much is bad.
Plenty is better.

993vic
Neutral
Posts: 6
Joined: Mon Jul 26, 2004 9:59 am
Location: Surrey

Post by 993vic » Tue Aug 24, 2004 4:10 pm

Found this on the RS4 Forum........

http://www.rs246.com/index.php?name=PNp ... ic&t=46290

993vic
Neutral
Posts: 6
Joined: Mon Jul 26, 2004 9:59 am
Location: Surrey

Post by 993vic » Tue Aug 24, 2004 4:10 pm

Found this on the RS4 Forum........

http://www.rs246.com/index.php?name=PNp ... ic&t=46290

User avatar
S4 OXON
1st Gear
Posts: 53
Joined: Fri Jan 23, 2004 9:16 pm

Post by S4 OXON » Thu Sep 02, 2004 9:43 pm

what i did was just pull the top part of on each side of the light and two clips pop out not a lot of room but if you use a screw driver bit and grips to undo the one screw which then it sides out did not take long not as bad as it sounds :thumbs:

Post Reply

Return to “S4 (B5 Typ 8D) 1997-2002”

Who is online

Users browsing this forum: No registered users and 80 guests