Feeler: Alpine 425i, Kufatec IMA Plus & reverse cam

Post by **DazN** » Tue Mar 06, 2012 9:02 pm

Thinking of removing all this from my RS4, it was professionally fitted around 8 months ago.

Alpine KCE425i
Kufatec IMA Plus
Reverse Camera (fits RS4 B7 where the registration plate bulb goes)
All wiring, video cables, cable to switch camera on when car is put in reverse etc, etc

Would remove and sell it all for a good offer, brand new you're looking at around £450 supplied and fitted.

Demo of it all can be seen here:-
http://www.vwcruise.com/Audi-A4-S4-RS4- ... -2008.html

Post by **V8mark** » Tue Mar 06, 2012 11:52 pm

Hi Daz,

PM sent,

Cheers
Mark

Post by **DazN** » Wed Mar 07, 2012 10:34 am

2 Pics attached, one of the camera view from inside the car (when reverse is selected) and the other of the interface.

Post by **Jules** » Wed Mar 07, 2012 1:12 pm

Is this working through the rnse Daz ?

Post by **DazN** » Wed Mar 07, 2012 2:34 pm

Yes Jules, the Alpine box is a video sender, the Kufatec converts that into a signal the RNSE understands (or something like that). If you have a MFSW you can control most things from there too, it's very clever how it all works but at the minute my iPod is dead so I've been using 4gb SD cards for a while and thought I might as well sell it.

Post by **Jules** » Wed Mar 07, 2012 3:04 pm

Ah ok,well i am defo after the use of the ipod,although i have the 6 disc aswell,any other benefits re sound,it cant play
dvd's i take it,sorry if thats a daft question

RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Feeler: Alpine 425i, Kufatec IMA Plus & reverse cam

Feeler: Alpine 425i, Kufatec IMA Plus & reverse cam

Re: Feeler: Alpine 425i, Kufatec IMA Plus & reverse cam

Re: Feeler: Alpine 425i, Kufatec IMA Plus & reverse cam

Re: Feeler: Alpine 425i, Kufatec IMA Plus & reverse cam

Re: Feeler: Alpine 425i, Kufatec IMA Plus & reverse cam

Re: Feeler: Alpine 425i, Kufatec IMA Plus & reverse cam

Who is online