Pics of mine - aka the blank canvas!

4.2 V8 40v biturbo - 450 bhp
4.2 V8 40v biturbo - 480 bhp (plus)
Post Reply
User avatar
Mr Footlong
Cruising
Posts: 4331
Joined: Thu Nov 10, 2011 12:07 pm

Re: Pics of mine - aka the blank canvas!

Post by Mr Footlong » Mon Jan 30, 2012 10:56 pm

Amar wrote:Very la de daa Mr. Footlong, and I hear what your saying. But I don't even think Audi bothered with real carbon, our engine covers aren't real carbon are they nor my interior trim for that matter?
BUT, they are at least solid/encased in clear plastic whereas the carbon trim stiff is basically glorified tape and I couldn't bring myself to put that on the car, no matter if most people couldn;t tell. I appreciate the input though :)
Current:

23' C8 RS6 Vorsprung - 23' RS E-Tron GT Carbon Vorsprung

Gone:

"Brutus"- C5 RS6 Avant - MRC stage 2 - Milltek non-res + 100 cell cats - Wagner ICs - PSS9 - H&R ARBs - OZ Superturismo LM - C6 Custom brakes - HD RNS-E - Various other bits - 555PS/832Nm
"Taz"- C7 RS6 - MRC stage 2 745PS/1095Nm
12' Cayenne Turbo, B7 RS4, S3, Cupra R, XJR, EVO VII, STI8,5,2&WRX, 106 GTI&XSI, other crap.
Top
User avatar
Mr Footlong
Cruising
Posts: 4331
Joined: Thu Nov 10, 2011 12:07 pm

Re: Pics of mine - aka the blank canvas!

Post by Mr Footlong » Mon Jan 30, 2012 10:57 pm

aka_dk wrote:
Mr Footlong wrote:Sorry dude. Dk should be able to comment on this too as his RS6 had the LED Indicator-equipped Dectanes and I think his were smoked too. That is if he can remember that many cars back ;)
yes they were <beep> on mine also

i used the milltek non res to indicate my impending movements
Knowing how bad they are now, with a sensible head on, would you have still bought them had you know just how pants they were? It's a real tossup for me.
Current:

23' C8 RS6 Vorsprung - 23' RS E-Tron GT Carbon Vorsprung

Gone:

"Brutus"- C5 RS6 Avant - MRC stage 2 - Milltek non-res + 100 cell cats - Wagner ICs - PSS9 - H&R ARBs - OZ Superturismo LM - C6 Custom brakes - HD RNS-E - Various other bits - 555PS/832Nm
"Taz"- C7 RS6 - MRC stage 2 745PS/1095Nm
12' Cayenne Turbo, B7 RS4, S3, Cupra R, XJR, EVO VII, STI8,5,2&WRX, 106 GTI&XSI, other crap.
Top
HYFR
Cruising
Posts: 15568
Joined: Tue Oct 07, 2008 7:02 pm

Re: Pics of mine - aka the blank canvas!

Post by HYFR » Mon Jan 30, 2012 11:02 pm

yes i would have still bought them
Top
Mr V10
Cruising
Posts: 5344
Joined: Wed Mar 15, 2006 11:38 pm

Re: Pics of mine - aka the blank canvas!

Post by Mr V10 » Mon Jan 30, 2012 11:10 pm

Mr Footlong wrote:
Amar wrote:Very la de daa Mr. Footlong, and I hear what your saying. But I don't even think Audi bothered with real carbon, our engine covers aren't real carbon are they nor my interior trim for that matter?
BUT, they are at least solid/encased in clear plastic whereas the carbon trim stiff is basically glorified tape and I couldn't bring myself to put that on the car, no matter if most people couldn;t tell. I appreciate the input though :)
No, I agree. That would look naff, even if the Audi CF is fake it looks great becaus of the solid/plastic encasing.
2009 Audi RS 6 Saloon V10 - 420mm Ceramics, Keyless, Soft Close, Adaptive Cruise, Glass Sunroof, Blinds, Twin Pane & UV, Freeview & DAB, High Beam Assist, MTM bits, Audi Exclusive Bits, MRC, Milltek, GYEF1 ASY2's, Bluetooth streaming music to AMI mod - 753PS, 1021 NM
2016 Audi S3 Saloon S-Tronic, Sepang, B&O, Tech Pack w/connect, 19" 5 Arm Wing Alloys, Comfort Pack, LED Light Pack - Company Car
1995 Audi A8 4.2 V8 quattro Sport
Top
User avatar
Shoppinit
Cruising
Posts: 20345
Joined: Wed Dec 31, 2008 6:24 pm

Re: Pics of mine - aka the blank canvas!

Post by Shoppinit » Tue Jan 31, 2012 8:45 am

Amar wrote: our engine covers aren't real carbon are they nor my interior trim for that matter?
Yes they are.

@12": You'll go for fake Alu, but not fake carbon? :)

I love this bit: "100% Quality with special Price!!"

Me love you long tiiiiiiiii!
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
Top
Ryan_Pestell
3rd Gear
Posts: 455
Joined: Mon Oct 24, 2011 7:44 am

Re: Pics of mine - aka the blank canvas!

Post by Ryan_Pestell » Tue Jan 31, 2012 9:47 am

it is real carbon weave, just a single sheet lol, and underneath above 5 mm of resin mounted onto aluminium trim from what i could see on my centre console peices, as i had them all out last weekend installing some wiring.
Daytona RS6+ Sold :(
Now Building a 500HP Lotus Exige
Top
User avatar
Mr Footlong
Cruising
Posts: 4331
Joined: Thu Nov 10, 2011 12:07 pm

Re: Pics of mine - aka the blank canvas!

Post by Mr Footlong » Tue Jan 31, 2012 9:57 am

I know I know but at least they aren't glorified Sellotape. Factoring in the price and what they look like from the photo (which isn't the best as you know) I was figuring out whether to give them a try. It's either that or £300+ or whatever for 2 pieces of sodding metal. Should I be putting the silver mirrors on her or not is the big question. The Bank of Nick isn't endless.
Current:

23' C8 RS6 Vorsprung - 23' RS E-Tron GT Carbon Vorsprung

Gone:

"Brutus"- C5 RS6 Avant - MRC stage 2 - Milltek non-res + 100 cell cats - Wagner ICs - PSS9 - H&R ARBs - OZ Superturismo LM - C6 Custom brakes - HD RNS-E - Various other bits - 555PS/832Nm
"Taz"- C7 RS6 - MRC stage 2 745PS/1095Nm
12' Cayenne Turbo, B7 RS4, S3, Cupra R, XJR, EVO VII, STI8,5,2&WRX, 106 GTI&XSI, other crap.
Top
gingertoss
3rd Gear
Posts: 355
Joined: Wed Aug 31, 2005 12:38 pm
Location: Glasgow

Re: Pics of mine - aka the blank canvas!

Post by gingertoss » Tue Jan 31, 2012 10:21 am

Save your money and spend it on fuel!!!!!
2003 RS6 Avant, non res Miltek, 3" catless dps, wagners, MRC air filters, 044 fuel pump, MRC custom remap, TCU remap, 566ps, 812nm, pss9 coilovers, hotchkis rollbars, Recaro CSs, 390mm front discs, hi-spec 4 pot rear calipers.
Top
User avatar
Shoppinit
Cruising
Posts: 20345
Joined: Wed Dec 31, 2008 6:24 pm

Re: Pics of mine - aka the blank canvas!

Post by Shoppinit » Tue Jan 31, 2012 10:46 am

They look ok in the photo. The test is seeing them in the flesh I suppose. Still, a lot of positive feedback. Worth a risk, I think.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
Top
User avatar
Shoppinit
Cruising
Posts: 20345
Joined: Wed Dec 31, 2008 6:24 pm

Re: Pics of mine - aka the blank canvas!

Post by Shoppinit » Tue Jan 31, 2012 10:59 am

Why don't you ask them for a photo showing them on the car?
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
Top
User avatar
Mr Footlong
Cruising
Posts: 4331
Joined: Thu Nov 10, 2011 12:07 pm

Re: Pics of mine - aka the blank canvas!

Post by Mr Footlong » Tue Jan 31, 2012 8:44 pm

Shoppinit wrote:Why don't you ask them for a photo showing them on the car?
When I get around to it I will thanks :). Oh cock, I didn;t remember that the current profile of my 18" tyres were 40's and the new 19's are coming with 30's so on top of the fact that the car has already clonked the cats on 2 speed humps due to being low slung, the actual heignt of the 19" setup is going to drop her by another 1/2 inch :(. I had it in my head for some stupid reason that I needed to go with 30 profile tyres. Oopsie, too late now! Should have been more precise with my calculations.........
Current:

23' C8 RS6 Vorsprung - 23' RS E-Tron GT Carbon Vorsprung

Gone:

"Brutus"- C5 RS6 Avant - MRC stage 2 - Milltek non-res + 100 cell cats - Wagner ICs - PSS9 - H&R ARBs - OZ Superturismo LM - C6 Custom brakes - HD RNS-E - Various other bits - 555PS/832Nm
"Taz"- C7 RS6 - MRC stage 2 745PS/1095Nm
12' Cayenne Turbo, B7 RS4, S3, Cupra R, XJR, EVO VII, STI8,5,2&WRX, 106 GTI&XSI, other crap.
Top
User avatar
mavada
Cruising
Posts: 3271
Joined: Thu Nov 11, 2010 1:19 pm
Location: The Neanderthal land

Re: Pics of mine - aka the blank canvas!

Post by mavada » Tue Jan 31, 2012 8:47 pm

...so youre going for these...nice choice... :thumbs:

Image
If you can't go to the track, bring the track to you.
Mugello Blue C5 RS6 Avant
Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Yellow Koni's
Porsche 959, gone but not forgotten.
Fight ALS disease https://www.youtube.com/watch?v=wGFDWTC8B8g
Top
User avatar
Mr Footlong
Cruising
Posts: 4331
Joined: Thu Nov 10, 2011 12:07 pm

Re: Pics of mine - aka the blank canvas!

Post by Mr Footlong » Tue Jan 31, 2012 8:56 pm

Yes, those babies but I will never, ever, ever be able to go over any more speed bumps ever again unless I jack her up!
Current:

23' C8 RS6 Vorsprung - 23' RS E-Tron GT Carbon Vorsprung

Gone:

"Brutus"- C5 RS6 Avant - MRC stage 2 - Milltek non-res + 100 cell cats - Wagner ICs - PSS9 - H&R ARBs - OZ Superturismo LM - C6 Custom brakes - HD RNS-E - Various other bits - 555PS/832Nm
"Taz"- C7 RS6 - MRC stage 2 745PS/1095Nm
12' Cayenne Turbo, B7 RS4, S3, Cupra R, XJR, EVO VII, STI8,5,2&WRX, 106 GTI&XSI, other crap.
Top
User avatar
mavada
Cruising
Posts: 3271
Joined: Thu Nov 11, 2010 1:19 pm
Location: The Neanderthal land

Re: Pics of mine - aka the blank canvas!

Post by mavada » Tue Jan 31, 2012 10:23 pm

when can we see some pics of Brutus with the new rims?
If you can't go to the track, bring the track to you.
Mugello Blue C5 RS6 Avant
Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Yellow Koni's
Porsche 959, gone but not forgotten.
Fight ALS disease https://www.youtube.com/watch?v=wGFDWTC8B8g
Top
User avatar
Mr Footlong
Cruising
Posts: 4331
Joined: Thu Nov 10, 2011 12:07 pm

Re: Pics of mine - aka the blank canvas!

Post by Mr Footlong » Tue Jan 31, 2012 10:43 pm

Revolution are putting the package together currently and are shipping them up to Doug & Co for Friday/Monday. I am up there next week having the final suspension/exhaust alignment and a couple of other little things so we are playing swapsies then. I will then be driving back with a boot full of old wheels, old cats and the resonated Milltek sections I bought at the same time as the non-res.

Once Lee gived her a proper clean again (The valeting guy, I am too terrified/lazy to wash her myself since he detailed her :D) I will do pics.
Current:

23' C8 RS6 Vorsprung - 23' RS E-Tron GT Carbon Vorsprung

Gone:

"Brutus"- C5 RS6 Avant - MRC stage 2 - Milltek non-res + 100 cell cats - Wagner ICs - PSS9 - H&R ARBs - OZ Superturismo LM - C6 Custom brakes - HD RNS-E - Various other bits - 555PS/832Nm
"Taz"- C7 RS6 - MRC stage 2 745PS/1095Nm
12' Cayenne Turbo, B7 RS4, S3, Cupra R, XJR, EVO VII, STI8,5,2&WRX, 106 GTI&XSI, other crap.
Top
Post Reply

Return to “RS6 / RS6 plus (C5 Typ 4B) 2002-2004”

Who is online

Users browsing this forum: asgor and 89 guests