RS4 brakes on an S4

2.7 V6 30v biturbo - 251bhp
2.7 V6 30v biturbo - 261bhp
Post Reply
BRETTCOLLINS
5th Gear
Posts: 1202
Joined: Tue Apr 01, 2003 9:50 pm
Location: Hertfordshire
Contact:
Contact BRETTCOLLINS

RS4 brakes on an S4

Post by BRETTCOLLINS » Tue Apr 13, 2004 1:39 pm

Will RS4 brakes front and back fit a S4 with 18in wheels.
is there a problem with offset of the wheel?

thanks

brett
MING BLUE AUDI S4
Car is on Lock down

506.9 BHP @ 6.020 RPM
445.0 WHP @ 5.981 RPM
481.5 IBFT @ 4.976 RPM
Top
User avatar
AFAP18
2nd Gear
Posts: 138
Joined: Wed Dec 17, 2003 6:01 pm

Post by AFAP18 » Tue Apr 13, 2004 6:38 pm

Try the search engine. But As I recall, I does not fit.
__________________________
Audi S4 Avant 2000 -6spd - silver -
....
Top
Golich
Top Gear
Posts: 1539
Joined: Sat Jan 25, 2003 7:28 pm
Location: Aberdeen

Post by Golich » Wed Apr 14, 2004 9:43 pm

Hhmm I'm not sure about that. The whole hub unit of the RS4 is aluminium and I suspect the mountings for the caliper will be in a different place from that of the S4 with it's smaller disk. This applies for both back and front hub/suspension arm/steerer.
Top
DavidT
Cruising
Posts: 6096
Joined: Tue Jan 07, 2003 4:46 pm
Location: Cheshire

Post by DavidT » Wed Apr 14, 2004 11:01 pm

Golich wrote:Hhmm I'm not sure about that. The whole hub unit of the RS4 is aluminium and I suspect the mountings for the caliper will be in a different place from that of the S4 with it's smaller disk. This applies for both back and front hub/suspension arm/steerer.
Not true of the rears, they are a direct swap.
Top
Prawn
4th Gear
Posts: 509
Joined: Thu Feb 13, 2003 2:49 pm
Location: West Sussex

Post by Prawn » Thu Apr 15, 2004 10:22 am

The rears will definatly fit, had these on my old S4, not sure about the fronts.
************

Prawn
Top
Post Reply

Return to “S4 (B5 Typ 8D) 1997-2002”

Who is online

Users browsing this forum: No registered users and 83 guests