Installation Guide
Installation Guide
Hey guys,
hoping someone has any idea how to replace the speaker grill on the drivers door?
Thanks
hoping someone has any idea how to replace the speaker grill on the drivers door?
Thanks
2006 B7 RS4 w/Black Optics | Milltek: Non-Res & Valved |MRC Stage 2
2010 8P S3 Sportback (Stage 1 MRC)
2010 8P S3 Sportback (Stage 1 MRC)
Re: Installation Guide
Accidently kicked it getting out?
Easily done unfortunately.
If it's like others you should be able to gently lever it off with a blunt tool working round the edges.
Easily done unfortunately.
If it's like others you should be able to gently lever it off with a blunt tool working round the edges.
Re: Installation Guide
LOL how did u guess?yorkie wrote:Accidently kicked it getting out?
Easily done unfortunately.
If it's like others you should be able to gently lever it off with a blunt tool working round the edges.

Thanks dude, much appreciated

I Also need to change my armrest, just the lid, kids broke the handle.

2006 B7 RS4 w/Black Optics | Milltek: Non-Res & Valved |MRC Stage 2
2010 8P S3 Sportback (Stage 1 MRC)
2010 8P S3 Sportback (Stage 1 MRC)
Re: Installation Guide
I got the arm rest straight from Audi... there might be one for sale in the classified section, but that was a while ago now.
Its was about €70 from Audi
Its was about €70 from Audi
Re: Installation Guide
Got the armrest, just wondering if its just simple to replace.
2006 B7 RS4 w/Black Optics | Milltek: Non-Res & Valved |MRC Stage 2
2010 8P S3 Sportback (Stage 1 MRC)
2010 8P S3 Sportback (Stage 1 MRC)
-
- Cruising
- Posts: 4468
- Joined: Mon Aug 14, 2006 1:13 pm
- Location: The Point
Re: Installation Guide
Speaker grille unfortunately need door trim panel off which has some hidden screws and some bastard clips - search for any B6/B7 door trim panel removal.
To replace armrest lid, you have to get the old one out by squeezing the rear hinges together, don't have to be too careful with the old one but observe how it mounts so you can work out how to put new one.
To replace armrest lid, you have to get the old one out by squeezing the rear hinges together, don't have to be too careful with the old one but observe how it mounts so you can work out how to put new one.
[youtube]https://youtu.be/-I1Ok9LTn6o[/youtube]
Re: Installation Guide
All Done. Thanks guys 

2006 B7 RS4 w/Black Optics | Milltek: Non-Res & Valved |MRC Stage 2
2010 8P S3 Sportback (Stage 1 MRC)
2010 8P S3 Sportback (Stage 1 MRC)
Re: Installation Guide
The catch on my lid lid has broken aswell, did you source just the lid by itself or the whole unit?
-
- 1st Gear
- Posts: 66
- Joined: Tue May 17, 2011 9:36 pm
Re: Installation Guide
Had the same problem - You can get just the top lid part.I too was dreading the possibility of having to purchase entire unit. I got it for about £65. Easy to fit
Re: Installation Guide
Just the lid mate. Ordered from http://www.thetradepartsspecialists.co.uk/m3vhf wrote:The catch on my lid lid has broken aswell, did you source just the lid by itself or the whole unit?
They can order any part you need at very low prices
2006 B7 RS4 w/Black Optics | Milltek: Non-Res & Valved |MRC Stage 2
2010 8P S3 Sportback (Stage 1 MRC)
2010 8P S3 Sportback (Stage 1 MRC)
Re: Installation Guide
Excellent, do you happen to have a part number & unit cost?
Re: Installation Guide
Sorry mate lost the invoice. Ordered more than one item, so dont remember the cost. Will update you if i find the invoice.m3vhf wrote:Excellent, do you happen to have a part number & unit cost?
2006 B7 RS4 w/Black Optics | Milltek: Non-Res & Valved |MRC Stage 2
2010 8P S3 Sportback (Stage 1 MRC)
2010 8P S3 Sportback (Stage 1 MRC)
Who is online
Users browsing this forum: No registered users and 73 guests