VAG COM engine data log
-
neckarsulm
- Cruising
- Posts: 4468
- Joined: Mon Aug 14, 2006 1:13 pm
- Location: The Point
VAG COM engine data log
Hi,
Below is a link to a data log from my new RS4.
http://www.volkswizard.co.uk/images/car ... NSEP10.xls
It seems standard as its running 2 bar boost but the MAF reading is 335 g/s which equates to 410 bhp.
I don't understand how to analyse the ignition timing data which is another way of enhancing performance apart from upping boost, can anyone else decode it?
Car has done a genuine 51k, had defective diverter valves when this was logged, running Tesco Momentum 99 RON, 1/4 tank fuel, just me in car.
Thanks
Below is a link to a data log from my new RS4.
http://www.volkswizard.co.uk/images/car ... NSEP10.xls
It seems standard as its running 2 bar boost but the MAF reading is 335 g/s which equates to 410 bhp.
I don't understand how to analyse the ignition timing data which is another way of enhancing performance apart from upping boost, can anyone else decode it?
Car has done a genuine 51k, had defective diverter valves when this was logged, running Tesco Momentum 99 RON, 1/4 tank fuel, just me in car.
Thanks
[youtube]https://youtu.be/-I1Ok9LTn6o[/youtube]
-
neckarsulm
- Cruising
- Posts: 4468
- Joined: Mon Aug 14, 2006 1:13 pm
- Location: The Point
RE: VAG COM engine data log
Bump, Doug, Minhea?
Here is data in an easier format to read
Here is data in an easier format to read
[youtube]https://youtu.be/-I1Ok9LTn6o[/youtube]
RE: VAG COM engine data log
I reckon you need to log fewer blocks in "turbo" mode to get better resolution on the data for starters...during accel there is almost 500rpm between data points so its hard to see whats going on in much detail...
58 C6 RS6 Stage 2+
58 C6 A6 Allroad 2.7 TDi
Previous:
2000 B5 S4 MRC 550 Saloon
2007 B7 RS4 Saloon
1994 S2 Coupe
58 C6 A6 Allroad 2.7 TDi
Previous:
2000 B5 S4 MRC 550 Saloon
2007 B7 RS4 Saloon
1994 S2 Coupe
-
neckarsulm
- Cruising
- Posts: 4468
- Joined: Mon Aug 14, 2006 1:13 pm
- Location: The Point
RE: VAG COM engine data log
Fair point but it's the same format as I have posted before and people have managed to assess it OK.
My main query is whether there is a way a MAF reading so high can be a bad thing e.g. boost leak?
My main query is whether there is a way a MAF reading so high can be a bad thing e.g. boost leak?
[youtube]https://youtu.be/-I1Ok9LTn6o[/youtube]
RE: VAG COM engine data log
log 003 115 020 in 3rd gear please then it'll mean a bit more, and after that do 003 118 031 too please 
-
neckarsulm
- Cruising
- Posts: 4468
- Joined: Mon Aug 14, 2006 1:13 pm
- Location: The Point
RE: VAG COM engine data log
Thanks, will do and nice and cold later this week 
[youtube]https://youtu.be/-I1Ok9LTn6o[/youtube]
-
neckarsulm
- Cruising
- Posts: 4468
- Joined: Mon Aug 14, 2006 1:13 pm
- Location: The Point
RE: VAG COM engine data log
it's a shame you didn't rev all the way to 7000, at least logs don't show it. Try to do a run in 3rd with 003 alone please, because I can't figure if your MAF values are so high only because you're lifting off at that point or what's going on exactly.
-
neckarsulm
- Cruising
- Posts: 4468
- Joined: Mon Aug 14, 2006 1:13 pm
- Location: The Point
I didn't rev all the way to 7000, the private road isn't long enough
Will try again soon
I am confused by MAF too, I did notice that it does feel very strong at the top end
Thank you for your help
Will try again soon
I am confused by MAF too, I did notice that it does feel very strong at the top end
Thank you for your help
[youtube]https://youtu.be/-I1Ok9LTn6o[/youtube]
-
neckarsulm
- Cruising
- Posts: 4468
- Joined: Mon Aug 14, 2006 1:13 pm
- Location: The Point
I meant strong as in the power keeps going all the way to the red line but I agree nothing like a mapped car.
Anyway here is some more data, MAF's even higher now!
I really can't wait to hear how a standard car can have such a high g/s, can MAFs go wrong and read high rather than the usual low?
Anyway here is some more data, MAF's even higher now!
I really can't wait to hear how a standard car can have such a high g/s, can MAFs go wrong and read high rather than the usual low?
[youtube]https://youtu.be/-I1Ok9LTn6o[/youtube]
-
neckarsulm
- Cruising
- Posts: 4468
- Joined: Mon Aug 14, 2006 1:13 pm
- Location: The Point
Why remap it in Jersey? 40 mph limit!
Been in England only for the last 2 years, serviced at Amersham Audi so not somewhere where they'd offer a Revo.
Genuinely 1 lady owner but her other car was a Cobra
Never had a belt change or discs and bought on mixed selection of cheap tyres, not a typical modded car.
Anyway how I can tell?
How can it be modded but on stock boost? Timing?
Been in England only for the last 2 years, serviced at Amersham Audi so not somewhere where they'd offer a Revo.
Genuinely 1 lady owner but her other car was a Cobra
Never had a belt change or discs and bought on mixed selection of cheap tyres, not a typical modded car.
Anyway how I can tell?
How can it be modded but on stock boost? Timing?
[youtube]https://youtu.be/-I1Ok9LTn6o[/youtube]
-
neckarsulm
- Cruising
- Posts: 4468
- Joined: Mon Aug 14, 2006 1:13 pm
- Location: The Point
Original MAF AFAIK as no extra stickers on it, no DTCs (which surprised me)
[youtube]https://youtu.be/-I1Ok9LTn6o[/youtube]
Who is online
Users browsing this forum: No registered users and 141 guests
