Kerbed alloy, thanks misses!!

4.2 V8 40v biturbo - 450 bhp
4.2 V8 40v biturbo - 480 bhp (plus)
chesney
2nd Gear
Posts: 190
Joined: Sun Nov 01, 2009 9:37 pm
Location: Aberdeenshire

Kerbed alloy, thanks misses!!

Post by chesney » Mon Sep 20, 2010 7:30 pm

Came home tonight and went to check my front pads and what do I find.......a kerbed wheel!!!! It was about 3/4 of the way round the wheel and a tiny chunk out the tyre!!!!!!!

I text my wife some mild abuse and got a 'sorry' in reply. WIll find out later what the heck she decided to rub it against.

I took it off and lightly sanded the kerbing and most came out and I masked it all up and sprayed it with the OEM colour Wurth alloy paint I happen to still have in the shed. Looks quite good now but I know its not quite right so maybe time to get the done in titan grey.

ANyone know a decent wheel refurber up here thats good and cheap!!!! And is there a paint code mix for Titan?

Aaaagh really pee's me off that I spend so much effort to keep the car mint and this happens. I know accidents do happen and at least she didn't write it or herself off but its still annoys me

A post repair pic

Image

bam_bam
Cruising
Posts: 14440
Joined: Mon Jan 18, 2010 9:08 pm
Location: London

RE: Kerbed alloy, thanks misses!!

Post by bam_bam » Mon Sep 20, 2010 8:06 pm

I feel your pain. I did a job on my near-side while in France, including a chunk out of the tyre.
My ho was leaning out of the car trying to reach a French toll booth, she kept saying "closer", to which I'd say "is there enough room for the wheel?". She'd reply "YES, get closer, I'm not going to be able to reach", so I say "are you sure the wheel won't hit the curb?", she says "yes, there's loads of room". So I roll about 2inches forward and receive the most horrible grind against the toll booth high gutter. She throws in the coins, slides back into her seat, buckles up and squeals "OK, let's go!", smiling at me oblivious as to why my face has blossomed into an incandescent purple picture of the anti-christ.
Needless to say that I was vibrating with anger before a large argument erupted along the lines of me wanting to readjust her spatial awareness using my pimp-hand and one of her expensive high heels. Every toll booth there after (and there were many), I pulled up so far from the booth, she practically had to shag a passing truckdriver in exchange for a lift the rest of the distance to the money chute.
To top it off, HRE said their powdercoats are special order and only available if the wheels were sent to them, in the USA. Pack of roosters.
No matter where you go, there you are.

iR8V10
Top Gear
Posts: 2131
Joined: Sun Feb 04, 2007 3:37 pm
Location: Sussex

RE: Kerbed alloy, thanks misses!!

Post by iR8V10 » Mon Sep 20, 2010 8:11 pm

Pack of Roosters! LOL

Give my wheel dude a call, (www.wheeldoctor.biz) he may well be able to sort it or Lepsons are good too.

If you mention the forum, he'll do you a 15% discount too. :thumbs:
Current: R8 V10+ Gen2: Dynamite Red
SOLD: R8 V10: Exclusive OEM + Spec: http://forum.rs246.com/viewtopic.php?f=38&t=103976
SOLD: S3 8L: The daily: http://forum.rs246.com/viewtopic.php?f= ... y+noggy+s3

ollys
4th Gear
Posts: 816
Joined: Fri Feb 22, 2008 1:05 am

Re: RE: Kerbed alloy, thanks misses!!

Post by ollys » Mon Sep 20, 2010 8:14 pm

bam_bam wrote:I feel your pain. I did a job on my near-side while in France, including a chunk out of the tyre.
My ho was leaning out of the car trying to reach a French toll booth, she kept saying "closer", to which I'd say "is there enough room for the wheel?". She'd reply "YES, get closer, I'm not going to be able to reach", so I say "are you sure the wheel won't hit the curb?", she says "yes, there's loads of room". So I roll about 2inches forward and receive the most horrible grind against the toll booth high gutter. She throws in the coins, slides back into her seat, buckles up and squeals "OK, let's go!", smiling at me oblivious as to why my face has blossomed into an incandescent purple picture of the anti-christ.
Needless to say that I was vibrating with anger before a large argument erupted along the lines of me wanting to readjust her spatial awareness using my pimp-hand and one of her expensive high heels. Every toll booth there after (and there were many), I pulled up so far from the booth, she practically had to shag a passing truckdriver in exchange for a lift the rest of the distance to the money chute.
To top it off, HRE said their powdercoats are special order and only available if the wheels were sent to them, in the USA. Pack of roosters.
:D :D :D :D LOL!!!!
I feel your pain...and your post made me laugh

chesney
2nd Gear
Posts: 190
Joined: Sun Nov 01, 2009 9:37 pm
Location: Aberdeenshire

RE: Re: RE: Kerbed alloy, thanks misses!!

Post by chesney » Mon Sep 20, 2010 8:24 pm

Oh god we're off to France in 10 days. Will be using the Bam bam guide to 'excercising your woman' to save the wheels! WIll just tell her its like when I park 3 miles from supermarket doors so nobody parks next to me and to accept I have an OCD

RS6dave, I need somebody more local as I can't be leaving the car up on bricks to get them done. Def fancy titan grey.

User avatar
Pau1
3rd Gear
Posts: 433
Joined: Wed Oct 11, 2006 2:55 am
Location: Aberdeenshire

RE: Re: RE: Kerbed alloy, thanks misses!!

Post by Pau1 » Mon Sep 20, 2010 8:29 pm

Chesney. Pop along and speak to Scott at Motorwerks on Forest Ave Lane. He can get your wheels done and he's also got my Titan Grey RS6 wheels sitting there for you to have a look at.
Emerald Green Bentley Continental GT & Monsoon Grey Audi SQ5... Wafters :)
Sepang Blue C6 RS6 Avant, Mapped, LED upgrade. Gone but not forgotten... :(
Black C6 RS6 Avant, Mapped, Non Res Milltek, Black Optic Grill, and Fully Loaded... Gone but not forgotten... :(
Black C5 RS6 Avant, MTM Mapped, Non Res Milltek, Black Optics, and Fully Loaded... Gone but not forgotten... :(
Blue S2 Avant, Mapped, 18 OEM S4 alloys... Probably in the scrapyard now... :(
Oak Green Corrado VR6, for life... ;)

chesney
2nd Gear
Posts: 190
Joined: Sun Nov 01, 2009 9:37 pm
Location: Aberdeenshire

RE: Re: RE: Kerbed alloy, thanks misses!!

Post by chesney » Mon Sep 20, 2010 8:31 pm

Cheers Paul. Will keep him in mind for when I get back and see what he can do.

I've just emailed him to ask what the deal is to get them done in titan. WOuld be ideal if he has a set to compare the colour to.
Last edited by chesney on Mon Sep 20, 2010 8:41 pm, edited 1 time in total.

User avatar
Wolverine
3rd Gear
Posts: 467
Joined: Sat Jan 21, 2006 6:34 pm

RE: Re: RE: Kerbed alloy, thanks misses!!

Post by Wolverine » Mon Sep 20, 2010 8:38 pm

Wife + Alloys = Disaster. I've never known a woman yet who hasn't kerbed a husbands car!

The problem I have is if I re-refurbish my alloys (yes, thats right I have already refurbished them) then they will only get kerbed/scratched again. I looked for tyres with rim protectors but still didnt manage to stop my missus kerbing the wheels.

But I think there may be a solution, not the most elegant ...... but possibly worth it over the pain of more scuffs .....

User avatar
Wolverine
3rd Gear
Posts: 467
Joined: Sat Jan 21, 2006 6:34 pm

RE: Re: RE: Kerbed alloy, thanks misses!!

Post by Wolverine » Mon Sep 20, 2010 8:40 pm

....... http://www.youtube.com/watch?v=-ITp2f0nNis

And can be fitted at your house or work by a mobile fitter ......

http://www.etyres.co.uk/alloygator

chesney
2nd Gear
Posts: 190
Joined: Sun Nov 01, 2009 9:37 pm
Location: Aberdeenshire

Re: RE: Re: RE: Kerbed alloy, thanks misses!!

Post by chesney » Mon Sep 20, 2010 8:50 pm

Wolverine wrote:....... http://www.youtube.com/watch?v=-ITp2f0nNis

And can be fitted at your house or work by a mobile fitter ......

http://www.etyres.co.uk/alloygator
Good idea but they do look a bit silly. I bet she'd be les careful if she thought they would save the wheels and I'd end up with bent track rods instead LOL

User avatar
ecain63
Top Gear
Posts: 2066
Joined: Sun Feb 08, 2009 7:28 pm
Location: Bournemouth

RE: Re: RE: Re: RE: Kerbed alloy, thanks misses!!

Post by ecain63 » Mon Sep 20, 2010 9:11 pm

My missus is a named driver on my policy but has only ever drivin it once. That was on the test drive when i bought it 4+ years ago. She now refuses to drive it as she fears she might end up in the freezer with the peas and carrots if she even farted in the 6. lol
Last edited by ecain63 on Mon Sep 20, 2010 9:28 pm, edited 1 time in total.
Now Sold!

'03 Daytona Grey RS6 Avant.
Bilstein PSS9's - bloody amazing.
275 Vreds.
MRC custom map with TCU.
Miltek Resonated.
Hi Flow filters.
Piano inserts with natural leather.
19" 'Plus' (Grey) rims.
Pioneer Avic-D3 (to replace RNS-D) inc DVD, Nav, Ipod Movies, Bluetooth and much more.

amanda1
Top Gear
Posts: 2476
Joined: Fri Oct 03, 2008 10:42 pm

Re: RE: Re: RE: Kerbed alloy, thanks misses!!

Post by amanda1 » Mon Sep 20, 2010 9:14 pm

Wolverine wrote:Wife + Alloys = Disaster. I've never known a woman yet who hasn't kerbed a husbands car!

Carefull now ................the only person that kerbed my wheels was .............my husband!!!!

amanda1
Top Gear
Posts: 2476
Joined: Fri Oct 03, 2008 10:42 pm

Re: RE: Re: RE: Kerbed alloy, thanks misses!!

Post by amanda1 » Mon Sep 20, 2010 9:16 pm

double post .........sorry

johnny11
4th Gear
Posts: 740
Joined: Sat Oct 09, 2004 5:55 pm
Location: surrey

Re: RE: Re: RE: Re: RE: Kerbed alloy, thanks misses!!

Post by johnny11 » Mon Sep 20, 2010 9:32 pm

ecain63 wrote:My missus is a named driver on my policy but has only ever drivin it once. That was on the test drive when i bought it 4+ years ago. She now refuses to drive it as she fears she might end up in the freezer with the peas and carrots if she even farted in the 6. lol
same here, my missus kerbed 3 of mine last year(don`t ask how she done 3) then i got them all refurbed, she now refuses to drive it in case the same happens, but she is now more than happy driving around in her A2 tdi :D

User avatar
MalcolmSu
4th Gear
Posts: 757
Joined: Mon Mar 03, 2008 8:26 pm
Location: Falkirk, Scotland
Contact:

Re: RE: Re: RE: Kerbed alloy, thanks misses!!

Post by MalcolmSu » Mon Sep 20, 2010 10:03 pm

Wolverine wrote:....... http://www.youtube.com/watch?v=-ITp2f0nNis

And can be fitted at your house or work by a mobile fitter ......

http://www.etyres.co.uk/alloygator
when new I think the black or silver look ok - but once kerbed i agree they look a bit silly. I can imagine driving along with bits flailing after a while...

Post Reply

Return to “RS6 / RS6 plus (C5 Typ 4B) 2002-2004”

Who is online

Users browsing this forum: Majestic-12 [Bot] and 269 guests