S8 Stonechip Repair Pics

Everything you need to know about cleaning products and general car care
Post Reply
Mr V10
Cruising
Posts: 5344
Joined: Wed Mar 15, 2006 11:38 pm

S8 Stonechip Repair Pics

Post by Mr V10 » Wed Mar 03, 2010 8:27 pm

My car is pretty immaculate but the stone chips on the front bumper really let it down, there are hundreds of them on the front bumper and they really bug me. So I decided enough was enough. I looked on the internet and saw other people had done it without damaging anything so set about ordering the paint from Audi, I'm not going to get into how useless they are here but they finally got the right one on the fourth attempt after some months. They tried to blame it on my cars 'Audi exclusive' colour.

So first of all I started filling out the stone chips, I used a c o c ktail (forum thought I was being rude so had to space the word :D) stick on some of them. This took ages and left my arms aching as my bumper was completely covered in them. Its pretty hard work. Left to dry overnight and then wetsanded using Meguairs 2500 unigrit. This parts scary but don't worry as it all comes off fairly easily with a G220 and a shot of Menz IP.

I only had time to do one half of the car and the difference is unreal, one half looks like its been freshly repainted and the other looks like its from a 100k plus miler (which it is). Going to be working some killer hours now, but next Monday I am free again and should be able finish it off.

The results should speak for them self...

The chips:

Image

Wet sanding (Yes, this was quite scary!):

Image

I didn't get a proper after pic, so it looks better now but this was during:

Image
2009 Audi RS 6 Saloon V10 - 420mm Ceramics, Keyless, Soft Close, Adaptive Cruise, Glass Sunroof, Blinds, Twin Pane & UV, Freeview & DAB, High Beam Assist, MTM bits, Audi Exclusive Bits, MRC, Milltek, GYEF1 ASY2's, Bluetooth streaming music to AMI mod - 753PS, 1021 NM
2016 Audi S3 Saloon S-Tronic, Sepang, B&O, Tech Pack w/connect, 19" 5 Arm Wing Alloys, Comfort Pack, LED Light Pack - Company Car
1995 Audi A8 4.2 V8 quattro Sport

User avatar
chunky79
Cruising
Posts: 11517
Joined: Sun Feb 25, 2007 11:51 am
Location: West Mids

Post by chunky79 » Thu Mar 04, 2010 7:42 am

Looks really good. You must have a lot of patience mate?
Are you putting a lacquer on top?
Dunc
previous- Pug 205 gti, 306 gti, 309 gti Goodwood.
Audi S3, S4 V8 avant.
Porsche Macan Turbo.
Gone but NEVER forgotten - C5 RS6 Misano red avant.

Now - Empty garage

If you don't know where you're going, any road will take you there!

kaisersolsay
3rd Gear
Posts: 484
Joined: Fri Aug 31, 2007 4:32 pm

Post by kaisersolsay » Sun Mar 14, 2010 12:01 am

How did you paint it?

scaghead
Top Gear
Posts: 1799
Joined: Sun Dec 21, 2008 7:52 pm
Location: essex

Post by scaghead » Sat Mar 20, 2010 10:41 pm

how are you getting on with it now fella?
R8 gen1 v10 plus white. Larini clubsport valved zorst.carbon side flicks,and fixed carbon spoiler.
Previous..RS4 Sprint blue loon..milltek non-res valved.revolution carbon air intake kit.cold air feed.carbon clean.MRC stage 2 remap..led interior lights.dectane led rear lights.led drls.Argon carbon oil splitter,race style front splitter,B and C door pillars and engine bottle cover..KW lowering springs.HEL brake lines all round.

Mr V10
Cruising
Posts: 5344
Joined: Wed Mar 15, 2006 11:38 pm

Post by Mr V10 » Mon Mar 22, 2010 11:01 pm

Hi, not well at the moment as my gearbox has just packed up and its now gone to a specialist. I will update upon completion.
I haven't used any lacquer, I am using the Audi touch up paint kit. Any other questions, please ask. :)
2009 Audi RS 6 Saloon V10 - 420mm Ceramics, Keyless, Soft Close, Adaptive Cruise, Glass Sunroof, Blinds, Twin Pane & UV, Freeview & DAB, High Beam Assist, MTM bits, Audi Exclusive Bits, MRC, Milltek, GYEF1 ASY2's, Bluetooth streaming music to AMI mod - 753PS, 1021 NM
2016 Audi S3 Saloon S-Tronic, Sepang, B&O, Tech Pack w/connect, 19" 5 Arm Wing Alloys, Comfort Pack, LED Light Pack - Company Car
1995 Audi A8 4.2 V8 quattro Sport

scaghead
Top Gear
Posts: 1799
Joined: Sun Dec 21, 2008 7:52 pm
Location: essex

Post by scaghead » Tue Mar 23, 2010 7:45 pm

get the gearbox sorted first fella.. good luck
R8 gen1 v10 plus white. Larini clubsport valved zorst.carbon side flicks,and fixed carbon spoiler.
Previous..RS4 Sprint blue loon..milltek non-res valved.revolution carbon air intake kit.cold air feed.carbon clean.MRC stage 2 remap..led interior lights.dectane led rear lights.led drls.Argon carbon oil splitter,race style front splitter,B and C door pillars and engine bottle cover..KW lowering springs.HEL brake lines all round.

kaisersolsay
3rd Gear
Posts: 484
Joined: Fri Aug 31, 2007 4:32 pm

Post by kaisersolsay » Sun Sep 12, 2010 8:49 pm

I need to do the same to my RS6 but not sure about the wet sanding bit!! What do you do after the wet sanding.......polish with a machine or by hand?

Post Reply

Return to “Cleaning & Car Care”

Who is online

Users browsing this forum: No registered users and 31 guests