removing fogs
removing fogs
guys im going to remove the fog-lights to aid better air flow to the IC's. anybody fitted the sportec grills?
Volvo XC90
C7 - RS6
C6 - RS6
B5 - RS4
C7 - RS6
C6 - RS6
B5 - RS4
- rhunter203
- 3rd Gear
- Posts: 331
- Joined: Thu Dec 13, 2007 11:49 pm
RE: removing fogs
Nope, they're bloomin expensive! I bought mine from Daniel (spacecowboy) from this forum.
MRC 490BHP 500ft/lbs RS4
3.6 0-60 12.04 1/4M
3.6 0-60 12.04 1/4M
RE: removing fogs
just checked on AMD website Rob, bloody £150 worth of expensive!
Volvo XC90
C7 - RS6
C6 - RS6
B5 - RS4
C7 - RS6
C6 - RS6
B5 - RS4
- Virdee Autos
- Trader (Expired)
- Posts: 2546
- Joined: Sun Jun 05, 2005 6:27 pm
RE: removing fogs
And from what I've heard they are not of great quality.
Best to buy a new centre grille, and then remove the bumper, and bond it from the inside. Cheaper and IMO looks proper OEM
Best to buy a new centre grille, and then remove the bumper, and bond it from the inside. Cheaper and IMO looks proper OEM
Virdee Autos ~ 07950-526592
Noggy Blue RS4 - 710N's | Supersprint Exhaust | RS6 Calipers/RS4 Discs | Aero Wipers | B7 rear wiper | Pioneer AVIC-F10BT | Alcantara dash | Alcantara headlining | 15mm spacers | Pentagon Tints/Supaglass | After-run mod | Carbon steering wheel | R8 engine bay caps | Brushed Alu plate plinth |
Noggy Blue RS4 - 710N's | Supersprint Exhaust | RS6 Calipers/RS4 Discs | Aero Wipers | B7 rear wiper | Pioneer AVIC-F10BT | Alcantara dash | Alcantara headlining | 15mm spacers | Pentagon Tints/Supaglass | After-run mod | Carbon steering wheel | R8 engine bay caps | Brushed Alu plate plinth |
- Virdee Autos
- Trader (Expired)
- Posts: 2546
- Joined: Sun Jun 05, 2005 6:27 pm
RE: removing fogs
Nope, but I know several people on here have.
As said if your a dab hand with DIY, then it's the best and cheapest solution IMO.
Around £30 for the grille, maybe some Sikaflex and some patience!
As said if your a dab hand with DIY, then it's the best and cheapest solution IMO.
Around £30 for the grille, maybe some Sikaflex and some patience!
Virdee Autos ~ 07950-526592
Noggy Blue RS4 - 710N's | Supersprint Exhaust | RS6 Calipers/RS4 Discs | Aero Wipers | B7 rear wiper | Pioneer AVIC-F10BT | Alcantara dash | Alcantara headlining | 15mm spacers | Pentagon Tints/Supaglass | After-run mod | Carbon steering wheel | R8 engine bay caps | Brushed Alu plate plinth |
Noggy Blue RS4 - 710N's | Supersprint Exhaust | RS6 Calipers/RS4 Discs | Aero Wipers | B7 rear wiper | Pioneer AVIC-F10BT | Alcantara dash | Alcantara headlining | 15mm spacers | Pentagon Tints/Supaglass | After-run mod | Carbon steering wheel | R8 engine bay caps | Brushed Alu plate plinth |
- rhunter203
- 3rd Gear
- Posts: 331
- Joined: Thu Dec 13, 2007 11:49 pm
Re: RE: removing fogs
Now why the hell didn't I do that – eh!! Where's Virdee when you need himVirdee Autos wrote:Nope, but I know several people on here have.
As said if your a dab hand with DIY, then it's the best and cheapest solution IMO.
Around £30 for the grille, maybe some Sikaflex and some patience!
The grills from Daniel are excellent quality – look the same as the OEM mesh but the black is slightly lighter in colour
MRC 490BHP 500ft/lbs RS4
3.6 0-60 12.04 1/4M
3.6 0-60 12.04 1/4M
- Virdee Autos
- Trader (Expired)
- Posts: 2546
- Joined: Sun Jun 05, 2005 6:27 pm
RE: Re: RE: removing fogs
LOL......if you don't ask you don't get!
Virdee Autos ~ 07950-526592
Noggy Blue RS4 - 710N's | Supersprint Exhaust | RS6 Calipers/RS4 Discs | Aero Wipers | B7 rear wiper | Pioneer AVIC-F10BT | Alcantara dash | Alcantara headlining | 15mm spacers | Pentagon Tints/Supaglass | After-run mod | Carbon steering wheel | R8 engine bay caps | Brushed Alu plate plinth |
Noggy Blue RS4 - 710N's | Supersprint Exhaust | RS6 Calipers/RS4 Discs | Aero Wipers | B7 rear wiper | Pioneer AVIC-F10BT | Alcantara dash | Alcantara headlining | 15mm spacers | Pentagon Tints/Supaglass | After-run mod | Carbon steering wheel | R8 engine bay caps | Brushed Alu plate plinth |
Re: RE: removing fogs
right just checked the grill is £40 all in - you think its possible to do both sections out of the one grill? only problem i can envisage here for me is doing this with the bumper still attached - think it would be easier to get it off and then do this.Virdee Autos wrote:Nope, but I know several people on here have.
As said if your a dab hand with DIY, then it's the best and cheapest solution IMO.
Around £30 for the grille, maybe some Sikaflex and some patience!
Volvo XC90
C7 - RS6
C6 - RS6
B5 - RS4
C7 - RS6
C6 - RS6
B5 - RS4
- Virdee Autos
- Trader (Expired)
- Posts: 2546
- Joined: Sun Jun 05, 2005 6:27 pm
RE: Re: RE: removing fogs
You should be able to do it with one grille.
And yes the bumper off is a definite. Otherwise you won't be able to fit/bond it properly.
And yes the bumper off is a definite. Otherwise you won't be able to fit/bond it properly.
Virdee Autos ~ 07950-526592
Noggy Blue RS4 - 710N's | Supersprint Exhaust | RS6 Calipers/RS4 Discs | Aero Wipers | B7 rear wiper | Pioneer AVIC-F10BT | Alcantara dash | Alcantara headlining | 15mm spacers | Pentagon Tints/Supaglass | After-run mod | Carbon steering wheel | R8 engine bay caps | Brushed Alu plate plinth |
Noggy Blue RS4 - 710N's | Supersprint Exhaust | RS6 Calipers/RS4 Discs | Aero Wipers | B7 rear wiper | Pioneer AVIC-F10BT | Alcantara dash | Alcantara headlining | 15mm spacers | Pentagon Tints/Supaglass | After-run mod | Carbon steering wheel | R8 engine bay caps | Brushed Alu plate plinth |
RE: Re: RE: removing fogs
If i was doing this mod, i'd take the standard grilles and chop out the centre mesh/foglight surround keeping the frame. Then bond a cut out section from a middle grill into the frames so their a factory fit without needing to remove the bumper.
- Virdee Autos
- Trader (Expired)
- Posts: 2546
- Joined: Sun Jun 05, 2005 6:27 pm
RE: Re: RE: removing fogs
Possible, but more fiddly IMO.
Virdee Autos ~ 07950-526592
Noggy Blue RS4 - 710N's | Supersprint Exhaust | RS6 Calipers/RS4 Discs | Aero Wipers | B7 rear wiper | Pioneer AVIC-F10BT | Alcantara dash | Alcantara headlining | 15mm spacers | Pentagon Tints/Supaglass | After-run mod | Carbon steering wheel | R8 engine bay caps | Brushed Alu plate plinth |
Noggy Blue RS4 - 710N's | Supersprint Exhaust | RS6 Calipers/RS4 Discs | Aero Wipers | B7 rear wiper | Pioneer AVIC-F10BT | Alcantara dash | Alcantara headlining | 15mm spacers | Pentagon Tints/Supaglass | After-run mod | Carbon steering wheel | R8 engine bay caps | Brushed Alu plate plinth |
RE: Re: RE: removing fogs
Doing that will give best results but you will need to buy 2 new centre bumper grilles as you cant quite get 2 out it
- rhunter203
- 3rd Gear
- Posts: 331
- Joined: Thu Dec 13, 2007 11:49 pm
RE: Re: RE: removing fogs
You might as well buy a set off Daniel for £90 – job done!
MRC 490BHP 500ft/lbs RS4
3.6 0-60 12.04 1/4M
3.6 0-60 12.04 1/4M
Re: RE: Re: RE: removing fogs
who that rob, tell me more please....rhunter203 wrote:You might as well buy a set off Daniel for £90 – job done!
Volvo XC90
C7 - RS6
C6 - RS6
B5 - RS4
C7 - RS6
C6 - RS6
B5 - RS4
Who is online
Users browsing this forum: No registered users and 88 guests