is this the write power figuares or have i been coned by mapper????
spec standered car with foam uprated panel filter and remap by south west tunners...
miles 42000 miles
intake temp 15 deg c
lb per foot 293.1
all figuares rolling road dyno at power station in tewkesbury today.
help please !!!!!
rs4 b7 wp232.2 bhp?? atf 366.2 after remap?????????
-
- Neutral
- Posts: 12
- Joined: Sat Mar 21, 2009 6:50 pm
Here we go...
Some B7's have dynoed as low as 360hp at the crank.
You should have ~310hp at the wheels.
Using the right fuel will make a huge difference.
Torque should be in the region of ~310ftlbs.
FWIW.
Some B7's have dynoed as low as 360hp at the crank.
You should have ~310hp at the wheels.
Using the right fuel will make a huge difference.
Torque should be in the region of ~310ftlbs.
FWIW.
58 C6 RS6 Stage 2+
58 C6 A6 Allroad 2.7 TDi
Previous:
2000 B5 S4 MRC 550 Saloon
2007 B7 RS4 Saloon
1994 S2 Coupe
58 C6 A6 Allroad 2.7 TDi
Previous:
2000 B5 S4 MRC 550 Saloon
2007 B7 RS4 Saloon
1994 S2 Coupe
-
- Neutral
- Posts: 12
- Joined: Sat Mar 21, 2009 6:50 pm
- PetrolDave
- Cruising
- Posts: 7599
- Joined: Mon Nov 07, 2005 11:28 am
- Location: Southampton, Hampshire UK
Sounds like the old debate on "how accurate are the power/torque figures on a wheel dyno" all over again!
What were the before and after figures for power & torque? - that's the only "like for like" comparison you can get, and which will tell you if the re-map was worth paying for.
What were the before and after figures for power & torque? - that's the only "like for like" comparison you can get, and which will tell you if the re-map was worth paying for.
Gone: 2006 B7 RS4 Avant (Phantom Black)
Who is online
Users browsing this forum: No registered users and 174 guests