Added a front splitter.

[nickwigan]

i did it with the bumper still on the car and it was fairly easy i just marked the middle of the spoiler and marked the middle of the front grill and trim the fixings off
the splitter has a line on it all the way round so u can line it up with that i fixed it with screws but there was slight gaps so i used sikaflex { flexable adhesive } and i will take the screws out once its gone off but watch out on the drivers side when u put srews in to fix it as the air con pipes are there and it does look alot better in the flesh and for 26 quid u cant go wrong

[dhali]

so.... any misano examples please?

how hard was it to fit?

looks nice on the S4 and the noggie RS

agree with quattrokid 1 , couldnt see the middle section of the splitter on lee's car.

[LOWR1D3R]

I did this very same mod on my car.

Here´s some pix..

[Siena]

LM's ftw!

[Doug_S2]

looking good on the rs4s

[quattrokid1]

just ordered mine

doesnt come with screws so have you lot secured it yourselves by whatever means or is there more part numbers for the securing bolts please?

t.i.a

[Virdee Autos]

I've written an explaination on the other side, but basically I used 8mm hex self tapping bolts, which are much stronger than normal crosshead screws, and also easier to use. Also used some speed nuts, to further reinforce on the other side.

[quattrokid1]

a BIG thanks to A20LEE for fitting mine this weekend:

[rtd]

very nice quattrokid1 kid........

[quattrokid1]

work in progress

[silversurferRS4]

Better looking than Topgear' plywood!

SSRS4

[quattrokid1]

LMAO.... yea I suppose it does

[RED_ROCKET]

That looks slick. Well done!!

[DutchRS4]

wow
Gonna order and mount one as well after my front bumpers repainting is done. Awesome mod!