MTM Bimotos titan/silver

Post by **Tilly** » Fri Mar 14, 2008 11:16 am

I'm struggling to find any pictures of a B7 RS4 saloon with these particular wheels on, I'm looking for pictures specifically in this finish:

And does anyone know how they compare weight-wise to OEM rims? I've tried searching the forum but not found much

Post by **P_G** » Fri Mar 14, 2008 11:52 am

I know someone with an RS6 with those wheels on, they look the muts..... but they are v.pricey.

Post by **Tilly** » Fri Mar 14, 2008 12:14 pm

You see I didn't think they looked too pricey... I've not got my car yet so I cant check tyre sizes etc so I don't know what they run as standard. From memory they were just over 2000 euros for the wheels alone which for forged rims I thought wasn't too bad and providing the rim width is the same as OEM I'd swap tyres from the standard wheels to the bimotos to save a few quid until they were due a change

Post by **Tilly** » Fri Mar 14, 2008 12:33 pm

are the standard OEM wheels 8.5J, 19 inch with an ET35 offset and PCD of 5 x 112?

Post by **klauster** » Fri Mar 14, 2008 1:35 pm

www.qstuning.com supplies them for something like £300+VAT per corner + tyres

Post by **P_G** » Fri Mar 14, 2008 2:19 pm

They've come down in price then, just been quoted for normal MTM Bimotos 9.5Jx19 including tyres for just over £2K.

Post by **hugy** » Fri Mar 14, 2008 2:23 pm

I have a set of MTM bimotos on my car.19x9.5" and 275/30 tyres.My wheels are anthracite finish.

Post by **GardinerG** » Fri Mar 14, 2008 2:32 pm

The irony is that they are cheaper than Audi OEM rims, for the RS6 at least.

Post by **P_G** » Fri Mar 14, 2008 3:40 pm

When I first looked at MTM's for my S4 a couple of years ago they were nearer £3k for the same size including tyres.

That's why I went for Sportecs

Post by **414BHP** » Fri Mar 14, 2008 9:13 pm

Tilly

Check this - http://www.pistonheads.com/sales/338498.htm

The alloys look pretty good eh!

Post by **S25MRS** » Sat Mar 15, 2008 12:47 am

Looks good, but £6k for milltek, remap and wheels/tyres?? flipping heck! Stick with my B5 I think - lol

Post by **Dom81** » Sat Mar 15, 2008 1:02 am

A bit OT, but those buckets aren't holding up very well. 6K, and serious arse marks!

Post by **EuroSag** » Sat Mar 15, 2008 7:13 pm

Must be a big lad!

Post by **philipwalker** » Sat Mar 15, 2008 8:26 pm

Check the weight of these out. They are a very heavy rim for the cost.

Better aiming for a iro 10kgs say a BBS LM 9.5x19

Post by **EuroSag** » Sat Mar 15, 2008 8:42 pm

philipwalker wrote:Check the weight of these out. They are a very heavy rim for the cost.

Better aiming for a iro 10kgs say a BBS LM 9.5x19

I'd quite fancy some BBS CH Black Edition's. What sort of weight would they be in that size?

RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

MTM Bimotos titan/silver

MTM Bimotos titan/silver

Who is online