RS246 Flyer Design UPDATE ...

Site changes, bug tracking, and improvements.
Please start a new threads for each issue/improvement.
Rob_O
2nd Gear
Posts: 154
Joined: Wed Jan 22, 2003 1:48 am
Location: AZ - US
Contact:

RS246 Flyer Design UPDATE ...

Post by Rob_O » Sat Aug 16, 2003 9:30 pm

Took everyone's feedback thus far and incorporated it into an A5 layout. The RSR background was pretty unanimous, so I only did the one this time.

Note the image below is reduced to conserve bandwidth and that the white space (with black outline) represents paper(as if printed). When the flyer is done, I'll simply supply the graphic part ready for anyone to print.

Finally, my apologies to Riz ... didn't even see your thread on doing an A5 flyer mate. I was just catching up on stuff Bushy'd asked me to do and this is completely coincidental. The photo you used is very cool BTW. Seems like I'm always trying to steal someone's thunder ... completely unintentional. Image

Thoughts on what the flyer should say? Taipan's suggestions were included this 'round to give an idea of how it might look with info on it.

Image
Image

Rob_O
2nd Gear
Posts: 154
Joined: Wed Jan 22, 2003 1:48 am
Location: AZ - US
Contact:

Re: RS246 Flyer Design UPDATE ...

Post by Rob_O » Sat Aug 16, 2003 9:36 pm

Also, this revised graphic could be used for the homepage as a replacement for the current image. I'd just remove the 'owners forums, tuning advice, etc.' and 'join us...' parts.

You might also be curious why the flyer has the vehicles RHD with noses pointed to the right while the homepage graphic appears LHD and point to the left? Well, when I originally did the homepage graphic I thought it "fit" better to have the cars in the same order as the site name; so I flipped the image to be RS2/4/6 then manipulated the photo so badges and such looked proper.

I could do the same for the flyer, just thought it fitting the image was RHD to begin with since most images I come across, even for UK adverts, are LHD native.

Cheers
Image

User avatar
Riz_RS4
Cruising
Posts: 2927
Joined: Fri Jan 31, 2003 10:15 pm
Location: South Yorkshire
Contact:

Re: RS246 Flyer Design UPDATE ...

Post by Riz_RS4 » Sat Aug 16, 2003 10:20 pm

Finally, my apologies to Riz ... didn't even see your thread on doing an A5 flyer mate. I was just catching up on stuff Bushy'd asked me to do and this is completely coincidental. The photo you used is very cool BTW. Seems like I'm always trying to steal someone's thunder ... completely unintentional.
Hey no problems..... your the best when it comes to things like this.... [img]images/graemlins/bowdown.gif[/img] so really my post was just to raise awareness.... but the Admin people all ready had plans in place before my posting... hence no harm done [img]images/graemlins/thumbs.gif[/img]

p.s Rob O how do you bill your customers? i.e. if i wanted to make a website etc?

Cheers
Image I`m just a hardcore petrol head :)

User avatar
wazza
Top Gear
Posts: 2464
Joined: Wed Jan 08, 2003 1:07 am
Location: Near the Magic Roundabout
Contact:

Re: RS246 Flyer Design UPDATE ...

Post by wazza » Sun Aug 17, 2003 1:08 am

[img]images/graemlins/bowdown.gif[/img]Rob
We will need to alter the text a bit on the right, but looks cool. It needs to convey what we bring to the Audi loving public. [img]images/graemlins/kissmyrings.gif[/img]
With regards to the layout: it needs to be the same as the homepage IMO.
Can the RSR background picture be shrunk slightly? I think it is such an amazing car design that it needs to be shown properly. From the picture you would only know it was an RSR if you knew the shape well.
Maybe as the RSR is not to be produced, should we use a pic of the Nuvolari?

Top work [img]images/graemlins/clap.gif[/img]
Paul

User avatar
PhilT
RS246.com
Posts: 8715
Joined: Fri Jan 10, 2003 2:03 pm
Location: South Yorkshire

Re: RS246 Flyer Design UPDATE ...

Post by PhilT » Sun Aug 17, 2003 8:08 am

I like it as is, maybe I'm easily pleased.....
RS246 Shop - RS246 Window Stickers and RS6 Keyrings

Current : 2016 Audi SQ7 & Radical SR3 Supersport

Ex : 2010 Nissan GT-R Premium Edition, 2014 Audi S3 Sportback, 2007 Audi Q7 4.2 TDI, Clio 172 Cup, B5 RS4, C5 RS6+ (249/999), S2 Coupe, Ex-Police Senator 3.0 24v, Ford Escort 1.3

User avatar
PhilT
RS246.com
Posts: 8715
Joined: Fri Jan 10, 2003 2:03 pm
Location: South Yorkshire

Re: RS246 Flyer Design UPDATE ...

Post by PhilT » Sun Aug 17, 2003 8:09 pm

Hate to be a stick in the mud, but what about the copyright on the original images used to create the leaflet? We would like to run this image in the Audi Magasine, and don't really want any trouble [img]images/graemlins/wink.gif[/img] ......
RS246 Shop - RS246 Window Stickers and RS6 Keyrings

Current : 2016 Audi SQ7 & Radical SR3 Supersport

Ex : 2010 Nissan GT-R Premium Edition, 2014 Audi S3 Sportback, 2007 Audi Q7 4.2 TDI, Clio 172 Cup, B5 RS4, C5 RS6+ (249/999), S2 Coupe, Ex-Police Senator 3.0 24v, Ford Escort 1.3

User avatar
Taipan
4th Gear
Posts: 740
Joined: Wed Jan 08, 2003 11:57 pm
Location: Stockholm, Sweden

Re: RS246 Flyer Design UPDATE ...

Post by Taipan » Sun Aug 17, 2003 10:49 pm

Not sure about UK law in theory and more importantly in practice (Thorney ?) but if it was in France : since RS246.com is basically a non-profit organisation, I'd be interested in the lawyers' speech to demonstrate how the potential infringement resulted in a financial gain achieved by RS246, how they would valuate that gain in front of a court, what's the damage for Audi and further down what's the capability of RS246 to pay for any penalty (probably could never cover a tenth of the initial legal fees of Audi).

Eric
- RS4 V6 Biturbo Imola Yellow (2001)
• Custom MTM 460hp manually tuned by Peter Link on MTM dyno at Ingolstadt HQ.
• Custom Full Milltek: Sport-Cats / Mid-Silencer: suppressed / End-Silencer: reduced.
• Full Mov'It upgrade: Front 380mm - 6 pistons / Rear 220mm - 4 pistons / Parking addon.

- Joined the Dark Side (aka. Darth Elon) circa 2013.

Rob_O
2nd Gear
Posts: 154
Joined: Wed Jan 22, 2003 1:48 am
Location: AZ - US
Contact:

Re: RS246 Flyer Design UPDATE ...

Post by Rob_O » Mon Aug 18, 2003 12:06 am

Agree with Taipan ... the image isn't being used to profit from (no financial gain related to use of the image itself), and since it was available in a public domain we can reproduce the image without consent. I'd be glad to give credit for the photo however, and assume it's an Audi press shot ... but don't know that for sure.
Image

User avatar
Cobstar
3rd Gear
Posts: 308
Joined: Tue Feb 11, 2003 12:12 pm
Location: Kent

Re: RS246 Flyer Design UPDATE ...

Post by Cobstar » Mon Aug 18, 2003 8:47 am

Hi RobO

It's looking really good.

Just some minor comments:
Is "Owner Forums" a bit exclusive - doesn't the site want to encourage wannabes too?

Is it worth including something like "The place to be for S and RS Car Enthusiasts"?

I know the website address is at the top of the flyer, but might it be helpful to put the text on the website that's lower down the flyer in a larger font?

Rob_O
2nd Gear
Posts: 154
Joined: Wed Jan 22, 2003 1:48 am
Location: AZ - US
Contact:

Re: RS246 Flyer Design UPDATE ...

Post by Rob_O » Mon Aug 18, 2003 4:32 pm

Thanks Cobstar ...

The 'owners forum' was taken directly from another suggestion and really meant as a "placeholder" until admin tells me what they want on the flyer.

And perhaps it's not as easy to see on screen, but both of your other suggestions are already in place - i.e., "Celebrating Audi's High Performance S & RS Models" below the cars and "join us at rs246.com" just above them. [img]images/graemlins/laugh.gif[/img]
Image

User avatar
PhilT
RS246.com
Posts: 8715
Joined: Fri Jan 10, 2003 2:03 pm
Location: South Yorkshire

Re: RS246 Flyer Design UPDATE ...

Post by PhilT » Mon Aug 18, 2003 5:43 pm

The 'owners forum' was taken directly from another suggestion and really meant as a "placeholder" until admin tells me what they want on the flyer.

What about if we didn't have anything.... Just see who would be interested to see more....
RS246 Shop - RS246 Window Stickers and RS6 Keyrings

Current : 2016 Audi SQ7 & Radical SR3 Supersport

Ex : 2010 Nissan GT-R Premium Edition, 2014 Audi S3 Sportback, 2007 Audi Q7 4.2 TDI, Clio 172 Cup, B5 RS4, C5 RS6+ (249/999), S2 Coupe, Ex-Police Senator 3.0 24v, Ford Escort 1.3

Carps
4th Gear
Posts: 557
Joined: Thu May 01, 2003 11:21 pm
Location: Surrey, England
Contact:

Re: RS246 Flyer Design UPDATE ...

Post by Carps » Mon Aug 18, 2003 9:51 pm

Looks excellent to me ! [img]images/graemlins/thumbs.gif[/img]

Jon
4th Gear
Posts: 767
Joined: Sun Feb 02, 2003 6:14 pm
Location: leeds
Contact:

Re: RS246 Flyer Design UPDATE ...

Post by Jon » Tue Aug 19, 2003 10:32 am

could do with some of these to take on the cannonball


can someone do a rendering of the logo in one colour so it can be put onthe cars livery for the event?

Rob_O
2nd Gear
Posts: 154
Joined: Wed Jan 22, 2003 1:48 am
Location: AZ - US
Contact:

Re: RS246 Flyer Design UPDATE ...

Post by Rob_O » Tue Aug 19, 2003 7:59 pm

What about if we didn't have anything.... Just see who would be interested to see more....

Image
Image

Rob_O
2nd Gear
Posts: 154
Joined: Wed Jan 22, 2003 1:48 am
Location: AZ - US
Contact:

Re: RS246 Flyer Design UPDATE ...

Post by Rob_O » Tue Aug 19, 2003 8:01 pm

could do with some of these to take on the cannonball

can someone do a rendering of the logo in one colour so it can be put onthe cars livery for the event?

Let me know what you need Jon and I'll try to sort it for you. By "one color" I assume you mean a grayscale version (technically two-colors [img]images/graemlins/wink.gif[/img] )?
Image

Post Reply

Return to “Site News, Issues, and Suggestions”

Who is online

Users browsing this forum: No registered users and 41 guests