S3 tuning

Post by **rsvirgin** » Fri Sep 28, 2007 10:21 am

Hi Guys

I have just chopped in my RS2 for a new S3 (in WHITE!!!!!) don't laugh it looks the nuts!!

Only trouble is I want more power!!!

Has anyone got any experience of re-mapping a new S3? any help would be greatly appreciated. Thanks guys.

Ben

Post by **J.A.C** » Thu Oct 04, 2007 10:53 pm

You may well want to try MRC Tuning as they're probably the best around at the moment. You'll be looking around the 300-310bhp mark.

I've very recently sold a white S3 but I used a Superchips Bluefin device as I wanted to turn the map on/off for servicing etc.

Post by **S2tuner** » Fri Oct 05, 2007 1:06 am

We really need to update our website but basically 305 310 BHP and around 420Nm of torque is what one of our maps will do on a new S3. OBD2 programmed of course.

Email us for more details. White S3's look gorgeous, I have been considering getting one recently...

HTH,

Mihnea

Post by **DavidT** » Fri Oct 05, 2007 8:04 am

White is the new silver

Post by **rsvirgin** » Sat Oct 06, 2007 12:25 pm

thanks guys, have a look at her, she's a peach!! So much better than the RS2! I will send you and email Mihnea

tried to attach a pic but can't!

Post by **rsvirgin** » Sun Oct 07, 2007 1:53 pm

lets see if this works, hopefully photo attached

Post by **SLC Detailing** » Sat Oct 20, 2007 6:08 pm

Stunning car mate. I was not sure about the new S3 until i saw a white one the other day. Now i think they look quality

Post by **rsvirgin** » Wed Oct 24, 2007 9:05 am

Just had a GIAC re-map done. The car is now awesome, 310bhp and 310ft/lb!!! Went to the Nurburgring this weekend managed 163mph at 6000 rpm so still more to go!! My brother went in my old RS2 and I pissed him in EVERY gear!!

Go to Regal Autosport in Southampton and get one done £450 + vat!!! They are gerat!!

Post by **s3shane** » Wed Oct 24, 2007 4:13 pm

nice 1 mate, did they do it on rolling road? what boost you running? i got a revo map done recently but wasnt done on rolling road, so not sure of the power, im told it should be 310/310 also.

Post by **rsvirgin** » Wed Oct 24, 2007 4:26 pm

no they didn't do a rolling road but it pissed my old chipped RS2 with 320bhp so it must be about right though! Thinking of getting a Miltek, do you know if they are any good?

Post by **s3shane** » Wed Oct 24, 2007 4:40 pm

well i rang mike at revo yesterday just to let him know how my map went,and they are developing a stage 2 revo map that includes a high pressure fuel pump, different air intake and a stainless turbo back exhaust, supposed to be up around 350 mark then

from what ive heard about the miltek so far has been only good stuff mate, i would be after one myself but cant persuade myself to go down the 'loud' path again -yet!

Post by **rsvirgin** » Wed Oct 24, 2007 4:45 pm

sounds tasty, Audi would have a fit though! Are the Milteks really load then or are they ok?

Post by **s3shane** » Wed Oct 24, 2007 4:57 pm

yeah they probably would have a few questions but i expect it would be ok to fit one, i listened to one at castlecoombe a few weeks ago and they are not that much louder ticking over but i dont know about driving hard and don't know if its too loud inside the car, its just after i had a loud car before i dont want constant noise inside the car anymore. but i think the exhaust gives 15-20bhp+ so its atough choice.

Post by **S2tuner** » Wed Oct 24, 2007 5:08 pm

350 on the stock turbo is definitely pushing it

Post by **s3shane** » Wed Oct 24, 2007 5:34 pm

thats what i thought nearly 100bhp over standard you don't get that too often from standard turbo's. we will wait and see.

RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

S3 tuning

S3 tuning

Who is online