The RS4 B7 or RS6 pad sensors are attached to the pads and clip straight into the sensor connector - no mods needed.
RS6 front brakes onto RS4 B5
No image Topbear
The RS4 B7 or RS6 pad sensors are attached to the pads and clip straight into the sensor connector - no mods needed.
The RS4 B7 or RS6 pad sensors are attached to the pads and clip straight into the sensor connector - no mods needed.
Clive
S2 ABY coupe, S4 B5 saloon, S4 B6 avant
RS4 B7 phantom black saloon, mint, fully loaded, low mileage - FOR SALE!- http://www.rs246.com/index.php?name=PNp ... ic&t=88981
S8 D2 facelift, RS6 C5 saloon, both gone but not forgotten
S2 ABY coupe, S4 B5 saloon, S4 B6 avant
RS4 B7 phantom black saloon, mint, fully loaded, low mileage - FOR SALE!- http://www.rs246.com/index.php?name=PNp ... ic&t=88981
S8 D2 facelift, RS6 C5 saloon, both gone but not forgotten
oh, and no anals on here please...! 
Clive
S2 ABY coupe, S4 B5 saloon, S4 B6 avant
RS4 B7 phantom black saloon, mint, fully loaded, low mileage - FOR SALE!- http://www.rs246.com/index.php?name=PNp ... ic&t=88981
S8 D2 facelift, RS6 C5 saloon, both gone but not forgotten
S2 ABY coupe, S4 B5 saloon, S4 B6 avant
RS4 B7 phantom black saloon, mint, fully loaded, low mileage - FOR SALE!- http://www.rs246.com/index.php?name=PNp ... ic&t=88981
S8 D2 facelift, RS6 C5 saloon, both gone but not forgotten
Steady Clive
Great. Good luck with the upgrade.
Small tip - before you do anything else, see if you can get the caliper bolts to shift with your spanner/breaker bar. If you can't, then it's a trip to your local Kwik Fit (or whatever) to get them loosened off.
Small tip - before you do anything else, see if you can get the caliper bolts to shift with your spanner/breaker bar. If you can't, then it's a trip to your local Kwik Fit (or whatever) to get them loosened off.
Clive
S2 ABY coupe, S4 B5 saloon, S4 B6 avant
RS4 B7 phantom black saloon, mint, fully loaded, low mileage - FOR SALE!- http://www.rs246.com/index.php?name=PNp ... ic&t=88981
S8 D2 facelift, RS6 C5 saloon, both gone but not forgotten
S2 ABY coupe, S4 B5 saloon, S4 B6 avant
RS4 B7 phantom black saloon, mint, fully loaded, low mileage - FOR SALE!- http://www.rs246.com/index.php?name=PNp ... ic&t=88981
S8 D2 facelift, RS6 C5 saloon, both gone but not forgotten
CheersCliveH wrote:Great. Good luck with the upgrade.
Small tip - before you do anything else, see if you can get the caliper bolts to shift with your spanner/breaker bar. If you can't, then it's a trip to your local Kwik Fit (or whatever) to get them loosened off.
All parts ordered this morning from DSGWagen for £1250 delivered inc the brake hoses. Should be here on Tuesday.
My mate who is a good mechanic has the car at the moment, and is stripping it all down
B5 RS4, MRC Remap, Milltek, RS6\B7 Brakes, Black\Carbon-
I-want-an-RS
- 3rd Gear
- Posts: 258
- Joined: Thu Jun 07, 2007 12:32 pm
Who is online
Users browsing this forum: No registered users and 96 guests