RS4 Engine Pull Tools & Longer 5th/6th gear parts

Post by **viperbl** » Wed Aug 15, 2007 7:52 pm

yorkie wrote:Don't know what you do for a living but you could be in the wrong job

Lets see if I can get it together first!!!

Post by **dummi** » Tue Aug 28, 2007 8:49 am

viper, what other gear did you need for the 6th gear upgrade? got a pn?

Post by **viperbl** » Tue Aug 28, 2007 9:51 am

dummi wrote:viper, what other gear did you need for the 6th gear upgrade? got a pn?

I needed the layshaft 6th gear, which is part number 01E 311 165 J.

The gearbox should be going together today, so, I will find out if I need anything else or if the two 6th gear cogs are enough.

Post by **dummi** » Tue Aug 28, 2007 12:08 pm

ok i'm thinking about this out for myself since i have to do the 1/2 fdp syncro repair, so expensive for a couple cogs though

Post by **viperbl** » Tue Aug 28, 2007 1:49 pm

Check out this thread, I-want-an-RS bought an old box for 50 quid, if you do the same, its a lot cheaper route ... might be worth a shot ??

Edited to say, I see you posted on that thread! lol! oops

Post by **dummi** » Tue Aug 28, 2007 2:05 pm

hehe yea, i'd love to find one for 50 quid, not seen any though, maybe i'll just post in the classifieds and hope i get lucky

Post by **viperbl** » Tue Aug 28, 2007 2:07 pm

How about all those online breakers? You can enter what you want and they go national for a breaker who might have one ... never know, you might get a deal ...

Post by **dummi** » Wed Aug 29, 2007 11:11 am

i'll give it a shot

looking through etka under 2.5tdi

01E 311 362D/L is 6th gear FWD
01E 311 365J is 6th gear for quattro... is this correct?

Post by **viperbl** » Wed Aug 29, 2007 11:15 am

dummi wrote:i'll give it a shot

looking through etka under 2.5tdi

01E 311 362D/L is 6th gear FWD
01E 311 365J is 6th gear for quattro... is this correct?

Eeek, pass, we will know in a few hours if they go together, and hopefully in a week if they run in the car! I will update ...

Post by **Doug_S2** » Wed Aug 29, 2007 11:27 am

Is the car going to be ready for the trip next week?

Post by **viperbl** » Wed Aug 29, 2007 11:34 am

Doug_S2 wrote:Is the car going to be ready for the trip next week?

Its touch and go, I am sure if it was in your hands it would be! but as it is in mine!

Gearbox should be with me tomorrow/friday. Its then all hands on deck. I believe I have everything I need, and I have my own little team to help! (well, select few that I trust!, but I will be checking bolts!!)

So, hopefully, all going well I will have it back on the road next week and ready for the ring trip!

Post by **Doug_S2** » Wed Aug 29, 2007 11:39 am

it always takes longer to put back together than to pull them apart!

Post by **viperbl** » Wed Aug 29, 2007 11:43 am

Doug_S2 wrote:it always takes longer to put back together than to pull them apart!

I know, I learnt that as a kid Doug

Also, I am wondering just how many comfy screws I will be left with ...

Post by **dummi** » Wed Aug 29, 2007 12:10 pm

viperbl wrote:
Doug_S2 wrote:it always takes longer to put back together than to pull them apart!
I know, I learnt that as a kid Doug

Also, I am wondering just how many comfy screws I will be left with ...

or spares as i tell my friends hehe

Post by **dace** » Wed Aug 29, 2007 4:12 pm

viperbl wrote:
Doug_S2 wrote:Is the car going to be ready for the trip next week?
Its touch and go, I am sure if it was in your hands it would be! but as it is in mine!

Gearbox should be with me tomorrow/friday. Its then all hands on deck. I believe I have everything I need, and I have my own little team to help! (well, select few that I trust!, but I will be checking bolts!!)

So, hopefully, all going well I will have it back on the road next week and ready for the ring trip!

If not we will have to "slum it" in mine..................

RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

RS4 Engine Pull Tools & Longer 5th/6th gear parts

Who is online