S4 Concert Radio DTC

Diagnostic Trouble Codes (DTC) / VCDS (VAG-COM) forum
Post Reply
User avatar
SJS
3rd Gear
Posts: 251
Joined: Mon Mar 10, 2003 5:20 pm
Location: Northern Ireland

S4 Concert Radio DTC

Post by SJS » Wed Aug 22, 2007 10:33 pm

Hi All,

Can anyone shed any light on this fault code?

Address 56 -------------------------------------------------------
Controller: 4B0 035 186 E
Component: Radio 0001
Coding: 00207
Shop #: WSC 00641
1 Faults Found:
00852 - Loudspeaker(s): Front
36-00 - Open Circuit


Ive searched on line to no avail...and the sound seems fine from the speakers....cant seem to find one not working.

cheers
Steve

User avatar
PetrolDave
Cruising
Posts: 7599
Joined: Mon Nov 07, 2005 11:28 am
Location: Southampton, Hampshire UK

RE: S4 Concert Radio DTC

Post by PetrolDave » Thu Aug 23, 2007 5:58 pm

Have you disconnected the radio or the wiring to the doors at some time? That would make this code appear.

Clear it and see it if comes back.
Gone: 2006 B7 RS4 Avant (Phantom Black)

User avatar
SJS
3rd Gear
Posts: 251
Joined: Mon Mar 10, 2003 5:20 pm
Location: Northern Ireland

Re: RE: S4 Concert Radio DTC

Post by SJS » Thu Aug 23, 2007 9:25 pm

PetrolDave wrote:Have you disconnected the radio or the wiring to the doors at some time? That would make this code appear.

Clear it and see it if comes back.
Hi there, Thanks for the reply. Ive only just got the car :D so not sure if its been previously disconnected..

Ive cleared the fault a few times and it comes straight back. Cant find any mention of it online...

User avatar
PetrolDave
Cruising
Posts: 7599
Joined: Mon Nov 07, 2005 11:28 am
Location: Southampton, Hampshire UK

RE: Re: RE: S4 Concert Radio DTC

Post by PetrolDave » Fri Aug 24, 2007 12:41 pm

Tried the Ross-Tech wiki? That has a good list of fault codes (DTCs).
Gone: 2006 B7 RS4 Avant (Phantom Black)

Sebastian
2nd Gear
Posts: 100
Joined: Fri Dec 15, 2006 10:39 pm
Location: Magdeburg, Germany
Contact:

RE: Re: RE: S4 Concert Radio DTC

Post by Sebastian » Mon Sep 17, 2007 1:03 am

Code wasn't covered but took care of that.

For future reference...

http://wiki.ross-tech.com/index.php/00852
Sebastian @ Ross-Tech.com

Post Reply

Return to “DTC / VCDS”

Who is online

Users browsing this forum: No registered users and 38 guests