Lager side mounted intercoolers - Who's in ?

Post by **s4woody** » Sun Feb 04, 2007 12:59 pm

anybody got the exact diamensions of these sportec intercoolers..length,width,hieght depth etc etc..

Post by **Nige_RS4** » Sun Feb 04, 2007 1:33 pm

I have - I will be handing them over to the IC mfr on Monday.

Note - these IC's are not designed for an S4 fitment.

Post by **s4woody** » Sun Feb 04, 2007 9:18 pm

i no nige..anychance you can email me the diamentions please..swoody123@aol.com woody

Post by **Nige_RS4** » Mon Feb 05, 2007 10:33 am

i no nige..anychance you can email me the diamentions

No worries Woody,

I only have it as a printed document - if I can find the website I got it from again, I will post it on here. Otherwise I will scan the document and post it.

Post by **phil24** » Mon Feb 05, 2007 12:02 pm

Hi All,

Would there be room for one more person on this ?
If so i would be interested .

Cheers

Phil

Post by **Nige_RS4** » Mon Feb 05, 2007 12:54 pm

Hi All,

Would there be room for one more person on this ?
If so i would be interested .

Cheers

Phil

This is not a group buy, but a cunning plan to produce some alternative SMIC's for the B5 RS4. Once they are available, you are free to contact the supplier direct with some reassurance that they will fit the RS4, and any fitting issues are highlighted beforehand - I will get photos taken of the fitting too!

Once mine are fitted I am happy to post some before and after graphs, to highlight any gains. Don't expect huge performance gains though - Sportec quote 10-15bhp for their SMICs! It's more about reducing IATs on hotter days / fast road/track work, which robs the engine of power.

HTH

Post by **s4woody** » Mon Feb 05, 2007 2:18 pm

Post by **Tomson** » Mon Feb 05, 2007 2:26 pm

Will be keeping an eye on this also - Godd work fella

Post by **bakerdcb** » Mon Feb 05, 2007 4:19 pm

Will look forward to seeing those at the pub Nige. Will certainly consider them for mine if it goes to plan, Cheers mate

Post by **Tomson** » Mon Feb 05, 2007 4:20 pm

"Will look forward to seeing those at the pub Nige"

Speaking of which, anyone fancy it?

Post by **Nige_RS4** » Mon Feb 05, 2007 5:10 pm

It would be rude not to!

Post by **SimonS4MTM** » Mon Feb 05, 2007 5:17 pm

Nige_RS4 wrote:Does anyone know of any fibreglass / carbon specialists who can make the ducts? Wasn't SimonMTM involved in carbon mfr????

Yes Nige, contact ben.taylor@f1systems.com he may be able to help, though things are very busy here at the moment.

Post by **2001S4ICS** » Tue Feb 06, 2007 6:35 am

these suckers should be coming out soon they were advertised on AW a while back..

Compared to the AWE smics

Post by **MarkB** » Tue Feb 06, 2007 9:21 am

Again they are not suitable for the RS4. Pipework all wrong...

Post by **2001S4ICS** » Tue Feb 06, 2007 9:54 am

MarkB wrote:Again they are not suitable for the RS4. Pipework all wrong...

Im confused here a couple times i have seen people running AWE intercoolers on RS4s intake setups?

Hes using a RS4 intake setup minus the Y pipe on this and AWE ICs

RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Lager side mounted intercoolers - Who's in ?

Who is online