Milltek exhaust

Discuss common aspects of Audi RS and S tuning and modifications
Ads4
5th Gear
Posts: 1088
Joined: Mon Sep 25, 2006 11:45 am
Location: 484.6BHP

Milltek exhaust

Post by Ads4 » Mon Jan 22, 2007 9:12 am

I've had my milltek system inc cats for about a year now and it's starting to do my head in! Although the sound outside isn't too bad (i think its a little on the boy racer side) the droning inside the cabin is horrible! I fitted the system as their slogan reads 'blows your mind not your ears' etc and thought it would be quite a stealthy upgrade but i feel i've ruined my S4!
I've contacted Phil Millington who offered a few sugestions, ie revert to the 3 inch system which is supposedly quiter, or to add another box, but i've been told that if i'm to upgrade to k04s i need to leave it as is. I ordered the 'quiet' system (the resonated) but am becoming more and more convinced that the non-resonated has been fitted instead-anyone had similar experiences? I'm sure there must be a code or serial no stamped on it somewhere-off to MRC on the 29th so maybe Doug can come up with some ideas...
Adam.

MRC B5 S4 Avant.

MarkB
Cruising
Posts: 5695
Joined: Thu Jun 30, 2005 11:52 am

RE: Milltek exhaust

Post by MarkB » Mon Jan 22, 2007 9:53 am

I think you can tell resonated or not by the tail pipes. If they are just smooth pipe (internal) then it's non-res. If the pipe is twin wall with a perforated internal you have resonated.
Mark

Ads4
5th Gear
Posts: 1088
Joined: Mon Sep 25, 2006 11:45 am
Location: 484.6BHP

RE: Milltek exhaust

Post by Ads4 » Mon Jan 22, 2007 9:58 am

I think you can tell resonated or not by the tail pipes. If they are just smooth pipe (internal) then it's non-res.
Sounds like i've got non-res (from your description Mark, not just the bl**dy noise!).

Any other decent exhaust up-grades suitable for k04s that don't make your ear drums bleed?
Adam.

MRC B5 S4 Avant.

MarkB
Cruising
Posts: 5695
Joined: Thu Jun 30, 2005 11:52 am

RE: Milltek exhaust

Post by MarkB » Mon Jan 22, 2007 10:02 am

You could get some resonated inserts fitted. Years ago a friend had a system made that was boomy in the mid range. This was solved by adding inserts.

Worth a try maybe??
Mark

User avatar
Nige_RS4
Cruising
Posts: 3264
Joined: Tue Feb 25, 2003 2:54 pm
Location: UK
Contact:

RE: Milltek exhaust

Post by Nige_RS4 » Mon Jan 22, 2007 11:55 am

You can get resonated link pipes for the RS4 - maybe the offer them for the S4?
https://www.speedcams.co.uk

B5 2.7t S4 - gone
B5 2.7t RS4 - gone
Ed 30 Golf DSG - gone
A5 3.0tdi - gone within 12 months!
S3 2.0 tfsi - 6+ years, but now sold
2018 Golf R 7.5

User avatar
Doug_S2
Trader (Expired)
Posts: 1756
Joined: Mon Sep 20, 2004 5:57 pm
Location: Banbury
Contact:

RE: Milltek exhaust

Post by Doug_S2 » Mon Jan 22, 2007 12:01 pm

It is the link pipes that are resonated or not resonated - not the catback. Dual is louder than a single 3" Have you got 100 or 200 cell cats?
S2 Coupe : S4 B5 WB : RS6 C5 : S4 B8 : R8 V8 Turbo : Q7 4.2 TDI

http://www.MRCtuning.com
http://www.facebook.com/mrctuning

MarkB
Cruising
Posts: 5695
Joined: Thu Jun 30, 2005 11:52 am

RE: Milltek exhaust

Post by MarkB » Mon Jan 22, 2007 12:17 pm

Doh, I was wrong.

I stand by the getting inserts though. It can make a big difference
Mark

Ads4
5th Gear
Posts: 1088
Joined: Mon Sep 25, 2006 11:45 am
Location: 484.6BHP

RE: Milltek exhaust

Post by Ads4 » Mon Jan 22, 2007 12:47 pm

Got the 200CPSI cats (or at least that's what I asked for along with the non-resonated system!)
Adam.

MRC B5 S4 Avant.

Ads4
5th Gear
Posts: 1088
Joined: Mon Sep 25, 2006 11:45 am
Location: 484.6BHP

RE: Milltek exhaust

Post by Ads4 » Mon Jan 22, 2007 12:48 pm

Getting confused....
Got the 200CPSI cats (or at least that's what I asked for along with the non-resonated system!)
I meant the resonated system... :oops:
Adam.

MRC B5 S4 Avant.

User avatar
Doug_S2
Trader (Expired)
Posts: 1756
Joined: Mon Sep 20, 2004 5:57 pm
Location: Banbury
Contact:

RE: Milltek exhaust

Post by Doug_S2 » Tue Jan 23, 2007 12:03 am

You won't get quieter without changing the catback to a 3" single (find someone that wants a louder exhaust and swap the dual for 3")

The resonators in the conecting pipes are perforated tube inserts in them. The Miltek part numbers will be stamped on a plate on the pipes.
S2 Coupe : S4 B5 WB : RS6 C5 : S4 B8 : R8 V8 Turbo : Q7 4.2 TDI

http://www.MRCtuning.com
http://www.facebook.com/mrctuning

Ads4
5th Gear
Posts: 1088
Joined: Mon Sep 25, 2006 11:45 am
Location: 484.6BHP

RE: Milltek exhaust

Post by Ads4 » Tue Jan 23, 2007 9:22 am

Hopefully we can discuss options on Monday Doug...cheers.
Adam.

MRC B5 S4 Avant.

MarkB
Cruising
Posts: 5695
Joined: Thu Jun 30, 2005 11:52 am

RE: Milltek exhaust

Post by MarkB » Tue Jan 23, 2007 9:34 am

I have a 3" single and could be tempted to do the swap. I'd want to hear the dual first though :?
Mark

smurfbus
3rd Gear
Posts: 320
Joined: Mon Jun 30, 2003 4:40 pm

RE: Milltek exhaust

Post by smurfbus » Tue Jan 23, 2007 7:57 pm

there is also a big difference avant vs. sedan, keep that in mind. My borla is said to be booming in avants, but its very nice in my sedan. low rumble fits me and my family nicely.

ChrisG
3rd Gear
Posts: 480
Joined: Sun Jan 12, 2003 5:47 pm
Location: Berkshire

RE: Milltek exhaust

Post by ChrisG » Wed Jan 24, 2007 2:35 pm

Mark your system sounds good, very subtle but with a hint of 'this isn't how it came from the factory'
ChrisG

MarkB
Cruising
Posts: 5695
Joined: Thu Jun 30, 2005 11:52 am

Re: RE: Milltek exhaust

Post by MarkB » Wed Jan 24, 2007 2:40 pm

ChrisG wrote:Mark your system sounds good, very subtle but with a hint of 'this isn't how it came from the factory'
Mine? I like it but I could live with a little more noise for a little more power ;)
Mark

Post Reply

Return to “Audi Tuning and Modifications”

Who is online

Users browsing this forum: Google Adsense [Bot] and 66 guests