Which Alloy Wheels RS6 brake fitment for S4

Post by **saf** » Mon Oct 30, 2006 3:05 am

Hi can anyone who has information on this please reply.

Im looking for a set of 18 inch alloys for my car as an upgrade to my 17 inch avus wheels so i can fit a set of rs6 brakes.

I want to keep the 225 40 18 tyre profile that is usually used.

The problem im having is finding a set of alloys with direct fitment for RS4 B7 Discs and the RS6 calippers.

I dont want to be adding custom brackets or spacers.

So if anyone who now what alloys will allow direct fitment of this kit, then please add a post.

Im looking for something standard, not to complicated, less spokes the better. And preferbly something that wont easily get kerbed or scuffed.

I was counting on the RS6 ones because they are plain and simple and at the same time very nice. Unfortunately those wont fit. Gone off the idea of mtm reps.

Any other ideas then please do post.

Many thnaks

Post by **philipwalker** » Mon Oct 30, 2006 3:13 pm

Wheels that I have fitted to various B5 S4`s with B7 RS4 discs and calipers are as follows

BBS CH 8.5x18 et35
OZ Superleggra 8x15 et35
BBS CK 8x18 et35

The above fitted without any spacers etc.

Post by **saf** » Mon Oct 30, 2006 8:00 pm

Any others?

I like my car looking stock and these look too bling fo rmy liking.

B6 Rs4 reps any good?

I dont mind going for B6 avus reps if they will fit. Not sure if they do reps for these anyhow. Searched and couldnt find anything.

Post by **kevinw** » Mon Oct 30, 2006 8:51 pm

B6 (avus) 18"'s are et45. I think you will need 10mm spacers for rs6 brakes. my brakes are standard and i needed 5mm spacers. i have never seen avus reps.

Post by **saf** » Mon Oct 30, 2006 10:54 pm

Thanks mate. Looks like I wont be getting these then.

Post by **CliveH** » Tue Oct 31, 2006 10:30 am

MTM bi-moto 18" reps, ET35, no issues and don't look bling IMHO

Post by **Doug_S2** » Tue Oct 31, 2006 4:24 pm

satan has b6 18" reps

Post by **MarkB** » Tue Oct 31, 2006 4:52 pm

Doug_S2 wrote:satan has b6 18" reps

I think you might find they are genuine. So the For Sale Ad for the car said...

Post by **Doug_S2** » Tue Oct 31, 2006 4:56 pm

They are reps - non genuine centre caps, and no audi numbers on them - 5mm spacers iirc - had me fooled until i took them off the car.

Post by **saf** » Tue Oct 31, 2006 4:57 pm

Thanks Doug. Might be back to the first alloy i wanted which is the MTM reps.

Are there any issues at all with these or are the reps all pretty much the same.

Ive just been offered some with 235 40 18 on them. Very tempting,and if its a straight fit ill most certainly have to get them.

I think the B6 reps are easily kerbed.

Anyone know if the mtm reps are easily kerbed too?

SO I take it , an RS4 B7 brake disc and RS6 plus callipers will go straight on with no modifications at all with the mtm reps?

Quality good aswell?

Post by **MarkB** » Tue Oct 31, 2006 5:01 pm

Doug_S2 wrote:They are reps - non genuine centre caps, and no audi numbers on them - 5mm spacers iirc - had me fooled until i took them off the car.

My dealings with the garage that had the car advetised weren't good so hearing that doesn't supprise me. I was a little worried making the statment knowing you have had the wheels off.

CliveH had genuine B6 S4 wheels over RS6 calipers with B7 RS4 discs. Also had spacers, can't remember how thick though...

Post by **saf** » Tue Oct 31, 2006 5:03 pm

kevinw wrote:B6 (avus) 18"'s are et45. I think you will need 10mm spacers for rs6 brakes. my brakes are standard and i needed 5mm spacers. i have never seen avus reps.

theres your answer mate.

Too much hassle to do these for my liking

Can u believe audi charge £75 quid + vat for centre caps.

Post by **MarkB** » Tue Oct 31, 2006 5:06 pm

Ask CliveH. He now runs MTM reps over his brakes...

Post by **CliveH** » Tue Oct 31, 2006 5:11 pm

Anyone know if the mtm reps are easily kerbed too?

It's down to care of course, but it does help if you fit 235/40 tyres

SO I take it , an RS4 B7 brake disc and RS6 plus callipers will go straight on with no modifications at all with the mtm reps?

Yep

CliveH had genuine B6 S4 wheels over RS6 calipers with B7 RS4 discs. Also had spacers, can't remember how thick though...

They were 10mm spacers

Post by **saf** » Tue Oct 31, 2006 5:39 pm

Im in love

Just saw these and thinking about them

They come in 5/112 et 35

Not sure about fittment.

Will i have any problems with these?

I think im down to 2 sets. Just depends on fittement i guess. If they both fit i need to decide which set i want.

MTM reps

or these.

Anyone fitted rs6 set up with these? They are Audi TT quattor cup reps

RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Which Alloy Wheels RS6 brake fitment for S4

Which Alloy Wheels RS6 brake fitment for S4

RE: Which Alloy Wheels RS6 brake fitment for S4

RE: Which Alloy Wheels RS6 brake fitment for S4

Who is online