Dealer me and 1.6mm tyres

4.2 V8 40v Naturally Aspirated - 339bhp
Post Reply
boosterboy
Neutral
Posts: 20
Joined: Tue Jul 11, 2006 12:11 am

Dealer me and 1.6mm tyres

Post by boosterboy » Fri Jul 21, 2006 12:59 am

guys picked up my 55 plate 14/7 from Camerons Perth (exemplary service) !!! parked on hard lock today 21/7 noticed inside of front tyres scrubbed. Only done around 400 easy miles since picked up. rear tyres 4mm so they look fine....

Dived into local Kwik Fit and had checked, both insides down to less than 1.6mm, crown and outsides barely 3mm. Reading Audi literature, the min for an approved Audi should be 3mm. raised question with Sales guy who sort of tried to pap me off with the MOT standard comments etc...

The question is, is the 3mm over the whole tyre or is it just over 3/4 of the tread, a la MOT/Police standards

anyone know what the correct interpretation of the Audi approved 3mm rule is.

Ill keep you informed , as i have asked for them to be replaced, hopefully they will as i have had outstanding service so far...

any comments at all would be great

regards yer pal stuart

Merlot
3rd Gear
Posts: 391
Joined: Wed Nov 17, 2004 10:34 pm
Location: UK

RE: Dealer me and 1.6mm tyres

Post by Merlot » Sun Jul 23, 2006 1:13 pm

Not sure.

As for wear this is normal for S4's - they lose the tread on the inside fronts very quickly.
Maserati GranTurismo GTS Auto, S3 Sportback, TT2 3.2 Roadster, Disco3 for the heavy stuff.

boosterboy
Neutral
Posts: 20
Joined: Tue Jul 11, 2006 12:11 am

Post by boosterboy » Tue Jul 25, 2006 12:01 am

think yer right merlot, however further to my question they have agreed to replace 1 and i have to pay for the other, no dice. expect a call tmorrow to agree that they foot the bill for both.

Keep yiz informed

stuart
Standard B7 S4 and CBR 900RR

User avatar
Mike_K
1st Gear
Posts: 89
Joined: Thu Oct 28, 2004 11:14 am
Location: Leiden, Holland

Post by Mike_K » Thu Jul 27, 2006 1:01 pm

I suspect they will argue that if they pay for 1 new tyre, they are effectively giving you 2 half-full tyres (ie average wear) - certainly better than if the car had actually had 3mm minimums on both, so it'll be interesting to see if you can squeeze the extra new tyre from them as well.....

g' luck !!

Morpheous
2nd Gear
Posts: 245
Joined: Tue Oct 07, 2003 8:12 am

Post by Morpheous » Thu Jul 27, 2006 10:36 pm

400 miles since delivery and your tyres are at the legal limit! I would demand a full geometry check and both tyres replaced. Nothing less.
Yes I can see the MOT states across 3/4 of the tread BUT, if you continued driving for the next 1000 odd miles, you could be through to the cords possibly resulting in blow out and loss of control, but hey the rest of the tyre is legal!

boosterboy
Neutral
Posts: 20
Joined: Tue Jul 11, 2006 12:11 am

Post by boosterboy » Sat Sep 16, 2006 8:27 am

further to my haggling with dealer i received 2 new Michelins FOC a couple of weeks later

all happy now
Standard B7 S4 and CBR 900RR

boosterboy
Neutral
Posts: 20
Joined: Tue Jul 11, 2006 12:11 am

Post by boosterboy » Sat Sep 16, 2006 8:28 am

not dropped in fer a while to let you guys know I received 2 new tyres from the deal... all happy now


Cheers
Standard B7 S4 and CBR 900RR

User avatar
ashleyadam
3rd Gear
Posts: 276
Joined: Wed Jun 14, 2006 10:33 am
Location: London SW

Post by ashleyadam » Sat Sep 16, 2006 8:58 am

I glad about that you would have to be a mug to accept that, stealers will scam what ever they can no adays. I would bet top dollar they new tyres where like that, if you purchased car used from Audi dealer you would get complete car check with the amount of thread on each tyre did you not get this.

Post Reply

Return to “S4 (B6 Type 8E/8H) 2003-2005 / (B7 Typ 8E/8H) 2005-2009”

Who is online

Users browsing this forum: No registered users and 25 guests