RS6/RS7/S6/S7/4.0 TFSI induction kit

[shanek]

Just a quick update, We have a very intermittent running issue with one of our current the test cars ( belongs to a customer and numerous Audi dealers cannot fix at present ). As soon as it is fixed we will post the results.

Hi Stuart, just wondered if there were any further updates on this? It's something I would be pretty I terested in.

[Stuart SWA]

Car are all sorted now, we ended up fixing it our selves and claiming from Audi. I have been playing around with the kit on both cars but with the current weather our ambient temps are really low and I don't believe it gives a true reading for the UK climate. All I will say is they are consistently lower in everyday use than a stock airbox car in the present weather with or without a heat deflector on the engine side. The only time we see a rise is in stop/start traffic for long periods.
I promise I will post up some pictures/videos soon but I want to be sure of my findings in some warmer outside temperatures. Roll on spring.

Thanks Stuart

[Needmorespace]

I made something similar after messing around with different bends. The Roc Euro style configuration had an extra bend and looked a bit less organised. I am also an engineer but went for noise so not too worried about power. Guess power not changed much without a remap? I made a basic head shield from aluminium firewall material with rubber foot seal edging. It's sounds great. Bit worried about water saturating the filter in Scottish weather

[Needmorespace]

[shanek]

Car are all sorted now, we ended up fixing it our selves and claiming from Audi. I have been playing around with the kit on both cars but with the current weather our ambient temps are really low and I don't believe it gives a true reading for the UK climate. All I will say is they are consistently lower in everyday use than a stock airbox car in the present weather with or without a heat deflector on the engine side. The only time we see a rise is in stop/start traffic for long periods.
I promise I will post up some pictures/videos soon but I want to be sure of my findings in some warmer outside temperatures. Roll on spring.

Thanks Stuart

Hi Stuart, have you made any further progress on testing the induction kit? I am still very interested in this addition.
Regards
Shane

[philS2]

Ha. Good old Stuart.