******Long awaited Gear Knobs and Braces for sale now******

[espengineering]

LADIES AND GENTS THE WAIT IS OVER!!!!


Starting from today we have a special introductory offer up to and including the RS246 live event on the 18th may!

Buy an ESP Engineering Gear box brace for our great introductory price of £160.00 (usual retail price £190.00) and you will be able to purchase a ESP Engineering Billet Gear Knob, with a standard engraving, for ,under half the retail price, £30.00!!!

Billet gear knobs are also available for the introductory offer of £45.00 (usual retail price £65.00) with a standard pattern engraved on them (this is RS4, S4, Audi Motorsport or 6 speed Audi gear stick pattern).

If you wish to have a PVD Ti (black) coated Gear knob this is an extra £12.00

It is not compulsory to have our engraving. We can engrave anything you wish (within reason). We are doing this at an introductory price of £20.00 per gear knob per custom engraving.

PLEASE NOTE DELIVERY will be £10.00 on all products. If you prefer to collect in person or just come and have a look at the products please feel free to come down.

Please e-mail me with your requests/questions to arrange orders/payment/shipment. Here is a little info on the products.

Product Info

ESP Engineering Gear Box Brace

The gearbox braces do exactly as the title would suggest.
The brace helps improve the shift making it more direct with increased feel. It has also been noticed that they provide chassis stiffening which results in a more positive handling chassis with increased steering feel and response. There is also a slight improvement in front end grip.

The braces come in kit form. It comprises of a three piece aluminium brace which has been CNC machined, a high tensile rubber/steel anti vibration block, gearbox mounting plate and the appropriate bolts (stainless steel where possible).

Fitting will take even an amateur around 30-45 minutes to fit. For the low outlay and ease of fitting this is a must have item for any high power B5 S4/RS4 even on a standard car you will notice an improvement.

ESP Engineering Billet Steel Gear Knobs.

These items have been designed primarily to improve the change on a car equipped with a short shifter kit, that’s not to say they will not improve a std shifter.

They improve the shift by subtly changing the weighting of the gearlever. This helps reduce the “notchyâ€

[espengineering]

more pics

[espengineering]

and more

[espengineering]

more

[espengineering]

Last pics.

[espengineering]

two more

[andream88]

Is it the "PVD Ti (black) coated Gear knob" the one pictured above??

Thank you

[espengineering]

yep thats the coated ones.
there is a new pic above with the two side by side. Standard uncoated stainless next to the plated one.

regards.

[espengineering]

Ok so we have had alot of interest in the products if people wouldnt mind leaving feedback once they have received there items that would be great!

[MarkB]

You might want to be @ Brunters on the 17th when we are all there

including the RS246 live event on the 18th may!

[espengineering]

Yep we will be there

[ZKNY]

kudos to you for the new items, designs, etc. especially on the DTS bar!
but just an FYI... metal knobs are... well, they conduct heat... so they get too cold n too hot all the time. too cold in the winter... too hot if left in direct sunlight. doyouknowwhaimean? but kudos again! where can i get more info like prices, pics, etc? keep up the good work, and thanks in advance.

[espengineering]

hello,
What info would you like?
Most of the information needed is in the blurb,

regards

[loomx]

Is the DTS pretty much exactly the same as the AWE one, will it be the same strength?

[quattrokid1]

10 quid to post a knob!!

I do like the RS4 billed one I must admit....

be in touch:)