Jacking points

Post by **Brooner** » Sun Feb 15, 2015 10:46 am

Anyone got and pictures of the jacking points for a trolley jack as I'm going to put my spacers on the car
I've had a trawl thought he net but not found any thing yet
cheers

Post by **Brooner** » Sun Feb 15, 2015 6:46 pm

i used the car jack but would still like to know the correct placement for the trolley jack if anyone knows

Post by **Surrey Sam** » Sun Feb 15, 2015 7:23 pm

Don't know the answer but could you not use one of these?

http://www.ebay.co.uk/itm/Rubber-pad-ru ... 418fecd2a8

Post by **Brooner** » Mon Feb 16, 2015 8:39 am

cheers will get one

Post by **nwk00** » Mon Feb 23, 2015 5:50 am

In case you are still looking for it, and for other members' future reference.

Post by **nwk00** » Mon Feb 23, 2015 5:51 am

Which wheel do you have on and what spacer size are you getting?

Post by **Brooner** » Mon Feb 23, 2015 7:41 am

I have rotors and 10 mm spacers

Post by **Graeme4130** » Mon Feb 23, 2015 8:37 am

I use the metal seam inside of each wheel as per the diagram a couple of posts up

Post by **Pando99** » Tue Feb 24, 2015 1:46 pm

I used the points as mentioned above with no problems. I did make a tool the same as the rubber one out of wood

I did contact the guy on Ebay as it doesn't mention RS4 fitment and got no answer, however i think you would need a slot of approx 12mm wide by 20mm deep and 110 long maximum if i remember correctly. If you trawl through all the different ads it does tell you the slot sizes

I was going to machine one at work but couldn't find a suitable material

Booner - if you do get round to sussing it order one for me as well and i'll sort you out back in the Ury

Post by **Brooner** » Tue Feb 24, 2015 4:46 pm

Pando
will see how the fitment is and let you know

Post by **MK2Golf24v** » Tue Feb 24, 2015 4:53 pm

It doesn't fit.

Better off with attic sheet if neoprene on the jack pad.

Post by **Brooner** » Tue Feb 24, 2015 4:59 pm

you tried these andy?

Post by **MK2Golf24v** » Tue Feb 24, 2015 5:22 pm

Aye I've got a couple. The slot is too narrow. I just use them on axle stands on my MK2 golds.

If you have a low profile jack some neoprene or heavy rubber sheet is best really.

Post by **Brooner** » Tue Feb 24, 2015 6:04 pm

Cheers it's ordered now so will ser if I can modify it if need be

RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Jacking points

Jacking points

Re: Jacking points

Re: Jacking points

Re: Jacking points

Re: Jacking points

Re: Jacking points

Re: Jacking points

Re: Jacking points

Re: Jacking points

Re: Jacking points

Re: Jacking points

Re: Jacking points

Re: Jacking points

Re: Jacking points

Who is online