Are Extended bolts required with 8mm spacers?
-
- Neutral
- Posts: 35
- Joined: Sun Dec 15, 2013 6:51 am
Are Extended bolts required with 8mm spacers?
Hey guys, so my 8mm h&r spacers arrived today, but my question is; will the oem bolts have enough meat on them to grip spacer+rim or will I need to get longer bolts?
-
- Neutral
- Posts: 35
- Joined: Sun Dec 15, 2013 6:51 am
Re: Are Extended bolts required with 8mm spacers?
Oh and was I supposed to get longer bolts in the kit?
Re: Are Extended bolts required with 8mm spacers?
yes need longer bolts
no not usually, do from virdee
who you get them from
no not usually, do from virdee
who you get them from
-
- 4th Gear
- Posts: 940
- Joined: Sun Nov 11, 2012 8:22 am
- Location: North Yorkshire
Re: Are Extended bolts required with 8mm spacers?
I got extended bolts and extended locking nuts with my kit from Virdee
Misano Red B7 RS4 Avant. 20" Rotors. KW adjustable spring kit. 8 & 10mm H&R spacers. MRC Stage 2 remap. Pre-cat delete & x-pipe.
-
- Neutral
- Posts: 35
- Joined: Sun Dec 15, 2013 6:51 am
Re: Are Extended bolts required with 8mm spacers?
Just think about how awesome it'll look when you get it done - it really does change the stance!
'13 Audi A4 Allroad - White (loaded)
'06 Audi RS4 - Sprint Blue (Non-res Milltek, valved)
'04 Lotus Elise 111R (Aubergine NOT purple) - will sell in the spring http://www.youtube.com/watch?v=Ez4KN_l7 ... SVUBYBWtEA
'56 ST220 (Sold)
'97 ST24 (Sold - loved lots)
'06 Audi RS4 - Sprint Blue (Non-res Milltek, valved)
'04 Lotus Elise 111R (Aubergine NOT purple) - will sell in the spring http://www.youtube.com/watch?v=Ez4KN_l7 ... SVUBYBWtEA
'56 ST220 (Sold)
'97 ST24 (Sold - loved lots)
-
- Neutral
- Posts: 35
- Joined: Sun Dec 15, 2013 6:51 am
Re: Are Extended bolts required with 8mm spacers?
Yup, will have to see where I can source some bolts asap.
Do you know what the length of the oem bolts are? Is it as simple as adding 8mm for the new extended bolts?
Do you know what the length of the oem bolts are? Is it as simple as adding 8mm for the new extended bolts?
-
- 3rd Gear
- Posts: 415
- Joined: Mon Aug 12, 2013 12:49 am
- Location: London
Re: Are Extended bolts required with 8mm spacers?
The OEM bolts have a 26mm thread length and yes as simple as that.Daytona RS wrote:Yup, will have to see where I can source some bolts asap.
Do you know what the length of the oem bolts are? Is it as simple as adding 8mm for the new extended bolts?

- Virdee Autos
- Trader (Expired)
- Posts: 2546
- Joined: Sun Jun 05, 2005 6:27 pm
Re: Are Extended bolts required with 8mm spacers?
Bolt sets in stock if your still after some!
Virdee Autos ~ 07950-526592
Noggy Blue RS4 - 710N's | Supersprint Exhaust | RS6 Calipers/RS4 Discs | Aero Wipers | B7 rear wiper | Pioneer AVIC-F10BT | Alcantara dash | Alcantara headlining | 15mm spacers | Pentagon Tints/Supaglass | After-run mod | Carbon steering wheel | R8 engine bay caps | Brushed Alu plate plinth |
Noggy Blue RS4 - 710N's | Supersprint Exhaust | RS6 Calipers/RS4 Discs | Aero Wipers | B7 rear wiper | Pioneer AVIC-F10BT | Alcantara dash | Alcantara headlining | 15mm spacers | Pentagon Tints/Supaglass | After-run mod | Carbon steering wheel | R8 engine bay caps | Brushed Alu plate plinth |
-
- Neutral
- Posts: 35
- Joined: Sun Dec 15, 2013 6:51 am
Re: Are Extended bolts required with 8mm spacers?
Hi Virdee where are you based?Virdee Autos wrote:Bolt sets in stock if your still after some!
Re: Are Extended bolts required with 8mm spacers?
ordered from Virdee came next day no problems at all,great service, only prob is you are in the states right?
- Bladerider
- 4th Gear
- Posts: 516
- Joined: Mon Nov 28, 2005 3:49 pm
- Location: Speedfreak County !!
- Contact:
Re: Are Extended bolts required with 8mm spacers?
Well,
When I ordered my spacers from Virdee I also got bolts, locking nuts, coilover's, arb's,adjustable front arms, a twix and a tube of Bigboy lube !!
Although he did ask for the twix and the lube back !!!!
Hope it worked out for you and Raul mate

When I ordered my spacers from Virdee I also got bolts, locking nuts, coilover's, arb's,adjustable front arms, a twix and a tube of Bigboy lube !!
Although he did ask for the twix and the lube back !!!!
Hope it worked out for you and Raul mate


07 RS4 Avus Avant : Usual spec with Buckets+FBSW+iPod dock+TV etc...100k+
Thanks to GBH Motorsport MRC Tuning VirdeeAuto Dubstep AwesomeGTI Wallachie Trups
H&R - Coilovers ARBs Spacers : 034 - RearArms Droplinks BilletMounts StrutTops : Eibach FrontArms : Powerflex Bushes
MRC - Stage2 Map+codeouts Stage2 Inlet+7mm gasket Stage2 deCarbon CAF : BMC Filter : Milltek Decats NonRes
Anthracite Alloys : Advan Neovas : Ferodo Pads+Castrol SRF : HEL Brakelines : Trups LED lighting
Thanks to GBH Motorsport MRC Tuning VirdeeAuto Dubstep AwesomeGTI Wallachie Trups
H&R - Coilovers ARBs Spacers : 034 - RearArms Droplinks BilletMounts StrutTops : Eibach FrontArms : Powerflex Bushes
MRC - Stage2 Map+codeouts Stage2 Inlet+7mm gasket Stage2 deCarbon CAF : BMC Filter : Milltek Decats NonRes
Anthracite Alloys : Advan Neovas : Ferodo Pads+Castrol SRF : HEL Brakelines : Trups LED lighting
Re: Are Extended bolts required with 8mm spacers?
8mm spacers require appr. 35mm bolts (orig. bolts 27-28mm).
Daytona Grey B8.5 & Guards Red 981 / Ex.Audi RS4 B7 Sedan, Daytona Grey.
-
- Neutral
- Posts: 35
- Joined: Sun Dec 15, 2013 6:51 am
Re: Are Extended bolts required with 8mm spacers?
A little bit further south... In South AfricaRick_RS4 wrote:ordered from Virdee came next day no problems at all,great service, only prob is you are in the states right?
Who is online
Users browsing this forum: No registered users and 185 guests