I think yes, but I am tempted to drive upto Dialynx (only 3 miles away) and get Keith to do the business with wheels, suspension and possibly brakes as well....
I've done suspension before and normally it has been a quite straightforward job but I am a bit concerned about doing the wheels, fancy 18's but having read your other post to me (thanks BTW) I'm not so sure it is that straightforward. I have contacted a few suppliers in the US about H&R kits. I'll keep you posted if you like?
Pics of Modded b5 s4's please
-
tartan_rob
- Cruising
- Posts: 2990
- Joined: Thu Sep 04, 2003 1:45 pm
- Location: Swindon, Wilts
RE: My wheel mods
2017 Kawasaki Z1000
2014 RS6
2014 S1
2014 RS6
2014 S1
RE: My wheel mods
Yes please Rob - H&R stuff - I'll reciprocate.
Wheels are easy to deal with.
Wheels are easy to deal with.
Clive
S2 ABY coupe, S4 B5 saloon, S4 B6 avant
RS4 B7 phantom black saloon, mint, fully loaded, low mileage - FOR SALE!- http://www.rs246.com/index.php?name=PNp ... ic&t=88981
S8 D2 facelift, RS6 C5 saloon, both gone but not forgotten
S2 ABY coupe, S4 B5 saloon, S4 B6 avant
RS4 B7 phantom black saloon, mint, fully loaded, low mileage - FOR SALE!- http://www.rs246.com/index.php?name=PNp ... ic&t=88981
S8 D2 facelift, RS6 C5 saloon, both gone but not forgotten
-
tartan_rob
- Cruising
- Posts: 2990
- Joined: Thu Sep 04, 2003 1:45 pm
- Location: Swindon, Wilts
Re: RE: My wheel mods
RE: H&R - will do.clive.harper wrote:Yes please Rob - H&R stuff - I'll reciprocate.
Wheels are easy to deal with.
RE: Wheels, are you saying that I can fit B6 Avus wheels straight on so long as I use 5mm spacers? What size tyres should I be looking at?? I was going to changes from SO3's to Eagle F1's anyway on my current 17' Avus wheels....they are getting to legal limit and therefore a good time to change both wheels and tyres.....would preferably have tyres as wide as possible...?
2017 Kawasaki Z1000
2014 RS6
2014 S1
2014 RS6
2014 S1
RE: Re: RE: My wheel mods
Rob,
The B6 18" wheels will go straight with the 5mm spacers - dont use the universal 3mm ones, which are very fiddly, poor quality, and difficult verging on dangerous to fit. I can tell you where to get the quality hubcentric ones at a sensible price.
The standard tyres on these wheels are 235/40 on 8J rims, you could probably go a little wider.
I believe the "stock" tyres on the B6 wheels are Conti Sports, which were on when I bought mine.
Eagle F1's would be just as good, but there's other threads on that subject.
If you need any more help, just PM me - I have been through this hoop and would not want you to have to reinvent the wheel! Sorry, but couldnt resist the poor pun and mixed metaphores!!
The B6 18" wheels will go straight with the 5mm spacers - dont use the universal 3mm ones, which are very fiddly, poor quality, and difficult verging on dangerous to fit. I can tell you where to get the quality hubcentric ones at a sensible price.
The standard tyres on these wheels are 235/40 on 8J rims, you could probably go a little wider.
I believe the "stock" tyres on the B6 wheels are Conti Sports, which were on when I bought mine.
Eagle F1's would be just as good, but there's other threads on that subject.
If you need any more help, just PM me - I have been through this hoop and would not want you to have to reinvent the wheel! Sorry, but couldnt resist the poor pun and mixed metaphores!!
Clive
S2 ABY coupe, S4 B5 saloon, S4 B6 avant
RS4 B7 phantom black saloon, mint, fully loaded, low mileage - FOR SALE!- http://www.rs246.com/index.php?name=PNp ... ic&t=88981
S8 D2 facelift, RS6 C5 saloon, both gone but not forgotten
S2 ABY coupe, S4 B5 saloon, S4 B6 avant
RS4 B7 phantom black saloon, mint, fully loaded, low mileage - FOR SALE!- http://www.rs246.com/index.php?name=PNp ... ic&t=88981
S8 D2 facelift, RS6 C5 saloon, both gone but not forgotten
I've done some bits and pieces here...
http://www.wak-tt.com/s4/s4.htm
maybe some of interest to you.
http://www.wak-tt.com/s4/s4.htm
maybe some of interest to you.
Who is online
Users browsing this forum: No registered users and 65 guests