heated seats

2.7 V6 30v biturbo - 251bhp
2.7 V6 30v biturbo - 261bhp
Russboy
3rd Gear
Posts: 311
Joined: Tue Jan 16, 2007 7:38 pm

Post by Russboy » Thu Feb 19, 2009 12:32 pm

Hanging down from the seat itself you mean?

Also got any links to fleabay on the climate control unit i'd need?

Cheers,

Russ
Evo VIII long gone
B5 S4 Avant long gone
Astra CDTI estate with 2 blown gearboxes long gone
BMW M Sport 320d Business Edition tourer the chariot of choice (with DMF about to die) gone
B8 S4 Avant is now the chariot of choice

reserves
4th Gear
Posts: 522
Joined: Fri Apr 28, 2006 11:57 am

Post by reserves » Thu Feb 19, 2009 1:15 pm

I doubt there will be a plug! However, I remember that the plugs were all coloured.

Take you seats out, if your seats have more plugs that your wiring loom, then you're in luck!

http://cgi.ebay.de/Audi-A4-B5-Klimabedi ... 240%3A1318

User avatar
h8cak
5th Gear
Posts: 1370
Joined: Wed Oct 11, 2006 5:03 pm
Location: Southampton UK

Post by h8cak » Thu Feb 19, 2009 2:49 pm

It will be a green plug the same size as the red plug which will be there for the power seats. I fitted my Rs4 seats then ran the car without the heaters untill i got the relevent bits to get it sorted. On the prefacelift the seat heater buttons are on either side of the fog, hazard switches. and the drivers switch is where the Cubby hole is now. I just changed the whole center console to facelift and bought a new climate control with the switches. The loom was from Kufatec which was very simple to fit just a bit fiddley. Good luck
Wide Body S4

reserves
4th Gear
Posts: 522
Joined: Fri Apr 28, 2006 11:57 am

Post by reserves » Thu Feb 19, 2009 2:51 pm

If you're getting a while new console, you may want to consider going Double Din, all the parts are actually different, the console, ashtray, cage, climate etc.

User avatar
h8cak
5th Gear
Posts: 1370
Joined: Wed Oct 11, 2006 5:03 pm
Location: Southampton UK

Post by h8cak » Thu Feb 19, 2009 2:54 pm

Ive done mine already. Got a pioneer Flip screen which is much better than anything audi do so i kept mine single din.
Wide Body S4

reserves
4th Gear
Posts: 522
Joined: Fri Apr 28, 2006 11:57 am

Post by reserves » Thu Feb 19, 2009 2:56 pm

That was supposed to be directed at bops4 :)

Also the double one is more expensive (the cage bit)

I did the whole change so I could fit the RNS-E, was expensive but looks good!

User avatar
h8cak
5th Gear
Posts: 1370
Joined: Wed Oct 11, 2006 5:03 pm
Location: Southampton UK

Post by h8cak » Thu Feb 19, 2009 6:27 pm

Oops ! It does look good i know. Is it all carboned up?
Wide Body S4

reserves
4th Gear
Posts: 522
Joined: Fri Apr 28, 2006 11:57 am

Post by reserves » Thu Feb 19, 2009 6:43 pm

I just left it plain, looks fine as it is :)

Plus when you've spent that much time and effort (and cash) getting it in, you kinda run out of energy at the end!

bops4
1st Gear
Posts: 98
Joined: Thu Feb 05, 2009 6:12 pm
Location: Essex

Post by bops4 » Wed Feb 25, 2009 5:45 pm

Will the loom from Kufatec fit switches with part number 8D0963563.

Post Reply

Return to “S4 (B5 Typ 8D) 1997-2002”

Who is online

Users browsing this forum: No registered users and 89 guests