Brake Pads
Re: Brake Pads
Dublin ones on order. Last set in the UK, for the time being!
"not a professional engineer, mechanic and mechanist"
-
Foxmeister
- 4th Gear
- Posts: 516
- Joined: Wed Feb 24, 2010 1:37 pm
Re: Brake Pads
I used to have DS2500 on my 4x4 Cosworth, great pads even for normal day to day driving, if i need to change pads on the RS it will be OEM or Ferodo
-
audi_driver79
- 4th Gear
- Posts: 600
- Joined: Fri Feb 04, 2011 12:55 am
- Location: Teesside / N. Yorks
Re: Brake Pads
I'm now on Ferodo Premier all round and tbh for everyday driving and some spirited driving they seem fine compared to OEM and my last 2 sets of them I never wore down to the sensor anyway.
C5 RS6 Avant Mugello Blue, Original Springs.
2001 A2 1.4tdi 75bhp. Runs on fresh air!
2001 A2 1.4tdi 75bhp. Runs on fresh air!
Re: Brake Pads
Audi have just confirmed that front brake pads for the C5 RS6 are NLA! Holy cow!
That's a service item, not a "rare & unusual" part.
That's a service item, not a "rare & unusual" part.
"not a professional engineer, mechanic and mechanist"
Re: Brake Pads
Doesn't make any sense. It's the same pad for the B7 RS4.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
Re: Brake Pads
Is that for definite - if so, I'll order some RS4 ones.
RS4 part number is looking like 8E0698151Q (that's for an 06-08, which I think is B7?) and shows as still available.
RS6 part number is 4B3698151A
RS4 part number is looking like 8E0698151Q (that's for an 06-08, which I think is B7?) and shows as still available.
RS6 part number is 4B3698151A
"not a professional engineer, mechanic and mechanist"
Re: Brake Pads
Also shares the same pad as a fee of the lambo range aswell
However I'm not sure what the compound differences will be as the lambo undoubtedly weighs a lot less
However I'm not sure what the compound differences will be as the lambo undoubtedly weighs a lot less
Cheers Al
04 c5 rs6 , Ebony Black, Bare shell repaint , Milltek's, PSS9's,Hotchkis Arb's,Gutted precats, hybrid turbos, Bosch 044 ,And an annoying EML light
04 c5 rs6 , Ebony Black, Bare shell repaint , Milltek's, PSS9's,Hotchkis Arb's,Gutted precats, hybrid turbos, Bosch 044 ,And an annoying EML light
Re: Brake Pads
What happened to the Dublin ones?
Pretty sure they are the same. Both RS4 and RS6 take the same DS2500 pad part number so it’s a fairly safe bet.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
Re: Brake Pads
Some Lambos are fatties. The Murci weighs almost the same as the RS6.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
Re: Brake Pads
Really
, I expected them too weigh the same as a wet teatowl . I know on the side of the box for my pads it listed a few fitments which is why I suggested the lambo route . I think were gonna have to start stockpiling parts sooner or later if they keep discontinuing them .Cheers Al
04 c5 rs6 , Ebony Black, Bare shell repaint , Milltek's, PSS9's,Hotchkis Arb's,Gutted precats, hybrid turbos, Bosch 044 ,And an annoying EML light
04 c5 rs6 , Ebony Black, Bare shell repaint , Milltek's, PSS9's,Hotchkis Arb's,Gutted precats, hybrid turbos, Bosch 044 ,And an annoying EML light
-
RS6Rottweiler
- 2nd Gear
- Posts: 152
- Joined: Tue Sep 03, 2013 11:02 am
- Location: Kirkcaldy, Fife
Re: Brake Pads
I use Hawk HPS and find them to be very good
Who is online
Users browsing this forum: Google Adsense [Bot] and 134 guests